储能科学与技术 ›› 2018, Vol. 7 ›› Issue (1): 123-.doi: 10.12028/j.issn.2095-4239.2017.0108

• 研究及进展 • 上一篇    下一篇

基于LabVIEW的PEMFC单电池电压巡检系统设计

朱晓舟，陈民武，刘湘东，赵航飞，韩明   

  1. 1西南交通大学电气工程学院，四川 成都 610031；2淡马锡理工学院清洁能源研究中心，新加坡529757
  • 收稿日期:2017-06-20 修回日期:2017-07-05 出版日期:2018-01-01 发布日期:2018-01-01
  • 通讯作者: 朱晓舟（1993—），男，硕士研究生，主要研究方向为燃料电池控制系统、新能源应用，E-mail：zxzswjtu@sina.com。

Design of single cell voltage monitor system based on LabVIEW for PEMFC

ZHU Xiaozhou1,2, CHEN Minwu1, LIU Xiangdong1,2, ZHAO Hangfei1,2, HAN Ming2   

  1. 1School of Electrical Engineering, Southwest Jiaotong University, Chengdu 610031, Sichuan, China; 2Clean Energy Research Centre, Temasek Polytechnic, Singapore 529757, Singapore
  • Received:2017-06-20 Revised:2017-07-05 Online:2018-01-01 Published:2018-01-01

PDF

301

被引次数

1

摘要： 本文设计了一套基于数据采集硬件模块和LabVIEW软件模块的质子交换膜燃料电池（PEMFC）单电池电压巡检系统。该系统实现了对单电池电压数据的实时检测、显示及存储，准确度高，抗干扰能力强，有效保障了PEMFC电堆的稳定运行。以实验室自制的阴极开放式PEMFC为实验平台，证明了本系统良好的测试精度与稳定性。

关键词: 质子交换膜燃料电池（PEMFC）, 单电池电压巡检系统, 数据采集, LabVIEW

Abstract:

A single cell voltage monitor system was designed and fabricated for PEM fuel cell application in this paper. This system consists of a hardware module using data collection chip, and the LabVIEW functioning as software module. It features the high-accuracy, strong anti-interference performance and real-time data display and data collection. It can be used to guarantee the stable operation of PEM fuel cell. This system was successfully applied in the performance study on a PEM fuel cell stack, and good experimental results were obtained.

Key words: proton exchange membrane fuel cell (PEMFC), single cell voltage monitor system;  , data collection, LabVIEW