级联半桥拓扑直流直挂储能装置的设计

doi:10.19799/j.cnki.2095-4239.2023.0825

储能科学与技术 ›› 2024, Vol. 13 ›› Issue (5): 1516-1522.doi: 10.19799/j.cnki.2095-4239.2023.0825

级联半桥拓扑直流直挂储能装置的设计

晁武杰¹^,²(), 邓超平¹^,², 黄均纬¹^,², 乔鑫³, 蔡曹轩³, 徐润东³, 凌志斌³()

^1.国网福建省电力有限公司电力科学研究院
^2.福建省智能电网保护与运行控制重点实验室，福建福州 350007
^3.上海交通大学电力传输与功率变换控制教育部重点实验室，上海 200240

收稿日期:2023-11-16 修回日期:2024-01-03 出版日期:2024-05-28 发布日期:2024-05-28
通讯作者: 凌志斌 E-mail:chaowujie1013@163.com;lingzhibin@sjtu.edu.cn
作者简介:晁武杰（1983—），男，博士，高级工程师，研究方向为直流输电技术、电力系统继电保护技术、直流直挂储能技术，E-mail：chaowujie1013@163.com；
基金资助:
国网福建省电力有限公司科技项目(52130423000K)

Design of DC direct-mounted energy storage device with cascaded half-bridge topology

Wujie CHAO¹^,²(), Chaoping DENG¹^,², Junwei HUANG¹^,², Xin QIAO³, Caoxuan CAI³, Rundong XU³, Zhibin LING³()

^1.Electric Power Research Institute of State Grid Fujian Electric Power Company Limited
^2.Fujian Key Laboratory of Smart Grid Protection and Operation Control, Fuzhou 350007, Fujian, China
^3.Key Laboratory of Control of Power Transmission and Conversion, Shanghai Jiao Tong University, Shanghai 200240, China

Received:2023-11-16 Revised:2024-01-03 Online:2024-05-28 Published:2024-05-28
Contact: Zhibin LING E-mail:chaowujie1013@163.com;lingzhibin@sjtu.edu.cn

摘要/Abstract

摘要：

随着海上风电、光伏等新能源的大规模建设，产生了直流输电、交直流互联和储能的应用需求。目前储能技术的研究和应用主要集中于交流储能领域。模块化多电平电池储能系统（modular multilevel converter based battery energy storage system，MMC-BESS）虽然在交直流互联的同时，实现了储能的功能，但电池中流过的工频、二倍频等脉动电流成分对电池寿命有潜在影响，且传统的模块化多电平（modular multilevel converter，MMC）换流站的改造成本高。本工作提出的直流直挂储能装置将换流和储能分离，电池电流仅为直流和高频脉动成分，工况对电池友好，且直流直挂储能系统需要电池单体数量仅为MMC-BESS的1/6，成本低。对直流直挂储能装置的拓扑结构及工作原理进行分析；对级联子模块的数量和参数进行设计；基于载波移相调制，推导直流纹波电流，进而对并网电感参数进行设计；建立直流直挂储能装置的数学模型，推导控制模型，根据控制框图进行功率控制。最后，通过仿真和样机实验，验证该半桥拓扑级联型直流直挂储能装置设计的可行性及正确性。实验证明，该设计和控制方法效果良好，对高压大容量直流直挂储能装置的设计有一定参考价值。

关键词: 直流直挂储能, 级联半桥, 并网电感, 载波移相调制, 功率控制

Abstract:

The escalation in the construction of new energy sources, such as offshore wind power and photovoltaics, has increased the demand for applications in DC transmission, AC-DC interconnection, and energy storage. Presently, research and applications in energy storage technology predominantly focus on AC energy storage. Although the modular multilevel converter based battery energy storage system (MMC-BESS) facilitates energy storage while interconnecting AC and DC networks, the presence of pulsating current components, including power and double frequencies, in the battery can adversely affect battery life. Moreover, the cost associated with retrofitting traditional modular multilevel converter (MMC) converter stations is significant. The proposed DC direct-mounted energy storage device decouples the converter and energy storage functions, ensuring that the battery current comprises only DC and high-frequency pulsation components, thus offering a battery-friendly operating environment. Furthermore, the DC direct-mounted energy storage system necessitates merely one-sixth the number of battery cells required by MMC-BESS, leading to cost reductions. This paper delves into the topology structure and operational principles of DC direct-mounted energy storage devices, designs the quantity and parameters of cascaded submodules, calculates the DC ripple current through carrier phase-shift modulation, and designs the parameters of the grid-connected inductance. It also establishes the mathematical model of the DC energy storage device, derives the control model, and implements power control based on the control diagram. The feasibility and accuracy of the cascaded half-bridge topology in DC direct-mounted energy storage devices are corroborated through simulation and prototype experiments. The experiments demonstrate the effectiveness of the design and control methods, offering valuable insights for the design of high-voltage and large-capacity DC energy storage devices.

Key words: DC direct-mounted energy storage, cascade half bridge, grid connected inductance, carrier phase shift modulation, power control

中图分类号:

TM 73

晁武杰, 邓超平, 黄均纬, 乔鑫, 蔡曹轩, 徐润东, 凌志斌. 级联半桥拓扑直流直挂储能装置的设计[J]. 储能科学与技术, 2024, 13(5): 1516-1522.

Wujie CHAO, Chaoping DENG, Junwei HUANG, Xin QIAO, Caoxuan CAI, Rundong XU, Zhibin LING. Design of DC direct-mounted energy storage device with cascaded half-bridge topology[J]. Energy Storage Science and Technology, 2024, 13(5): 1516-1522.

图/表 10

图1

图2

图3

图4

表1

图5

图6

图7

图8

图9

参考文献 18

1	迟永宁, 梁伟, 张占奎, 等. 大规模海上风电输电与并网关键技术研究综述[J]. 中国电机工程学报, 2016, 36(14): 3758-3771.
	CHI Y N, LIANG W, ZHANG Z K, et al. An overview on key technologies regarding power transmission and grid integration of large scale offshore wind power[J]. Proceedings of the CSEE, 2016, 36(14): 3758-3771.
2	陶建根, 陈怡, 黄博远. 海上风电发展现状与趋势分析[J]. 能源工程, 2023, 43(4): 1-9.
	TAO J G, CHEN Y, HUANG B Y. Current situation and development trend of offshore wind power[J]. Energy Engineering, 2023, 43(4): 1-9.
3	武鸿鑫, 李爱魁, 董存, 等. 计及调频备用的储能平抑风电功率波动控制策略[J]. 储能科学与技术, 2023, 12(4): 1194-1203.
	WU H X, LI A K, DONG C, et al. Control strategy for wind power fluctuation stabilization with energy storage and frequency modulation reserve[J]. Energy Storage Science and Technology, 2023, 12(4): 1194-1203.
4	缪平, 姚祯, Lemmon JOHN, 等. 电池储能技术研究进展及展望[J]. 储能科学与技术, 2020, 9(3): 670-678.
	MIAO P, YAO Z, JOHN L, et al. Current situations and prospects of energy storage batteries[J]. Energy Storage Science and Technology, 2020, 9(3): 670-678.
5	谢小荣, 马宁嘉, 刘威, 等. 新型电力系统中储能应用功能的综述与展望[J]. 中国电机工程学报, 2023, 43(1): 158-169.
	XIE X R, MA N J, LIU W, et al. Functions of energy storage in renewable energy dominated power systems: Review and prospect[J]. Proceedings of the CSEE, 2023, 43(1): 158-169.
6	王书毅, 李勇琦, 彭鹏, 等. 电池储能能量转换系统研究综述[J]. 电气自动化, 2018, 40(4): 1-4.
	WANG S Y, LI Y Q, PENG P, et al. Overview of research on the energy conversion system of battery energy storage[J]. Electrical Automation, 2018, 40(4): 1-4.
7	凌志斌, 黄中, 田凯. 大容量电池储能系统技术现状与发展[J]. 供用电, 2018, 35(9): 3-8, 21.
	LING Z B, HUANG Z, TIAN K. The state of art and trend of large scale battery energy storage system technology[J]. Distribution & Utilization, 2018, 35(9): 3-8, 21.
8	吴靖, 许杰, 陈佩军, 等. 电池储能系统中电力电子变换器并网结构发展综述[J]. 浙江电力, 2021, 40(3): 104-112.
	WU J, XU J, CHEN P J, et al. Review on the integration structure development of power electronics converters for battery energy storage system[J]. Zhejiang Electric Power, 2021, 40(3): 104-112.
9	SHI Y X, LI R, XUE Y S, et al. Optimized operation of current-fed dual active bridge DC-DC converter for PV applications[J]. IEEE Transactions on Industrial Electronics, 2015, 62(11): 6986-6995.
10	陈挺, 崔文峰, 邓谊柏, 等. 飞跨电容型三电平电路在超级电容能馈系统中的应用研究[J]. 储能科学与技术, 2020, 9(3): 935-941.
	CHEN T, CUI W F, DENG Y B, et al. Research on the application of flying capacitor three-level circuit in supercapacitor energy feedback system[J]. Energy Storage Science and Technology, 2020, 9(3): 935-941.
11	KAWAKAMI N, OTA S, KON H, et al. Development of a 500 kW modular multilevel cascade converter for battery energy storage systems[J]. IEEE Transactions on Industry Applications, 2014, 50(6): 3902-3910.
12	丁明, 陈中, 张国荣, 等. 级联H桥储能变换器直流纹波电流的无源与有源抑制策略[J]. 电力自动化设备, 2016, 36(4): 19-24, 61.
	DING M, CHEN Z, ZHANG G R, et al. Passive and active schemes of DC ripple suppression for cascaded H-bridge converter of energy storage system[J]. Electric Power Automation Equipment, 2016, 36(4): 19-24, 61.
13	徐政, 肖晃庆, 张哲任, 等. 柔性直流输电系统[M]. 2版. 北京: 机械工业出版社, 2017.XU Z, XIAO H Q, ZHANG Z R, et al. Flexible DC transmission system[M]. 2nd ed. Beijing: China Machine Press, 2017.
14	田凯. 模块化多电平电池储能系统均衡控制研究[D]. 上海: 上海交通大学, 2021.
	TIAN K. Research on balancing control of modular multilevel converter based battery energy storage system[D]. Shanghai: Shanghai Jiao Tong University, 2021.
15	汪晋安, 许建中. 分布式储能型MMC电池荷电状态均衡优化控制策略[J]. 电力自动化设备, 2023, 43(7): 44-50.
	WANG J A, XU J Z. SOC balancing optimal control strategy amongst batteries in MMC-DES[J]. Electric Power Automation Equipment, 2023, 43(7): 44-50.
16	陈满, 彭鹏, 李勇琦, 等. MMC-BESS交直流功率控制研究[J]. 电工技术, 2023(2): 60-64.
	CHEN M, PENG P, LI Y Q, et al. Research on AC/DC power control of MMC-BESS[J]. Electric Engineering, 2023(2): 60-64.
17	陆海洋, 王翀, 任铁强, 等. 直流侧直挂储能拓扑结构及控制策略研究[J]. 浙江电力, 2023, 42(1): 39-45.
	LU H Y, WANG C, REN T Q, et al. Research on topology structure and control strategy of direct-hanging energy storage on the DC side[J]. Zhejiang Electric Power, 2023, 42(1): 39-45.
18	姚宏洋, 谢晔源, 王翀, 等. 基于模块化级联拓扑的高压直流直挂储能装置[J]. 电力自动化设备, 2024, 44(3): 9-14, 21.
	YAO H Y, XIE Y Y, WANG C, et al. HVDC direct-mounted energy storage device based on modular cascaded topology[J]. Electric Power Automation Equipment, 2024, 44(3): 9-14, 21.

参数	取值
直流电网电压U_DC	750 V
直流侧额定功率	7500 W
子模块电压U_B	51.2 V
子模块数量N	20个
并网电感L_S	8 mH
开关频率	1000 Hz
直流电压基准值V_DCB	750 V
直流电流基准值I_DCB	10 A
直流控制器P参数K_pdc	0.3
直流控制器I参数K_idc	93.4

级联半桥拓扑直流直挂储能装置的设计

Design of DC direct-mounted energy storage device with cascaded half-bridge topology

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

图/表 10

参考文献 18

相关文章 1

编辑推荐

Metrics

本文评价