Numerical simulation of forced convective heat transfer of molten salt in tubes

doi:10.12028/j.issn.2095-4239.2018.0247

Abstract

CLC Number:

TK11
TK02

MENG Qiang, CHEN Mengdong, HU Xiao, WANG Le, YANG Cenyu, XU Guizhi. Numerical simulation of forced convective heat transfer of molten salt in tubes[J]. Energy Storage Science and Technology, 2019, 8(3): 544-550.

References

[1] SHIRVAN K M, ELLAHI R, MIRZAKHANLARI S, et al. Enhancement of heat transfer and heat exchanger effectiveness in a double pipe heat exchanger filled with porous media:Numerical simulation and sensitivity analysis of turbulent fluid flow[J]. Applied Thermal Engineering, 2016, 109:761-774.
[2] HASHEMIAN M, JAFARMADAR S, NASIRI J, et al. Enhancement of heat transfer rate with structural modification of double pipe heat exchanger by changing cylindrical form of tubes into conical form[J]. Applied Thermal Engineering, 2017, 118:doi:10.1016/j. applthermaleng.2017.02.095.
[3] VAEZI S, KARBALAEE M S, HANAFIZADEH P. Effect of aspect ratio on heat transfer enhancement in alternating oval double pipe heat exchangers[J]. Applied Thermal Engineering, 2017, 125:doi:10.1016/j.applthermaleng.2017.07.070.
[4] SHARIFI K, SABETI M, RAFIEI M, et al. Computational fluid dynamics (CFD) technique to study the effects of helical wire inserts on heat transfer and pressure drop in a double pipe heat exchanger[J]. Applied Thermal Engineering, 2018, 128(C):898-910.
[5] SAHITI N, KRASNIQI F, FEJZULLAHU X, et al. Entropy generation minimization of a double-pipe pin fin heat exchanger[J]. Applied Thermal Engineering, 2008, 28(17):2337-2344.
[6] MAAKOUL A E, METOUI M E, ABDELLAH A B, et al. Numerical investigation of thermohydraulic performance of air to water double-pipe heat exchanger with helical fins[J]. Applied Thermal Engineering, 2017, 127:127-139.
[7] DASTMALCHI M, SHEIKHZADEH G A, AREFMANESH A. Optimization of micro-finned tubes in double pipe heat exchangers using particle swarm algorithm[J]. Applied Thermal Engineering, 2017, 119:1-9.
[8] 刘斌. 熔融盐圆管内强迫对流换热的实验研究[D]. 北京:北京工业大学, 2009. LIU B. Experimental study for forced convective heat transfer with molten salt in a circular tube[D]. Beijing:Beijing University of Technology, 2009.
[9] 刘闪威, 吴玉庭, 崔武军, 等. 低熔点熔盐圆管内强迫对流换热[J]. 化工学报, 2015, 66(2):530-536. LIU S, WU Y, CUI W, et al. Forced convection heat transfer in low melting point molten salt circular tube[J]. Journal of Chemical Engineering, 2015, 66(2):530-536.
[10] 戴锅生. 传热学[M]. 第2版, 北京:高等教育出版社, 1999.

[1]	Guohui FENG, Tianyu WANG, Gang WANG. A simulation analysis on the effect of encapsulation mode on the heat storage and release performance of phase change water tank [J]. Energy Storage Science and Technology, 2022, 11(7): 2161-2176.
[2]	Baocun DU, Lijuan HUANG, Yonggang LEI, Chongfang SONG, Fei WANG. Dynamic study on the thermal and stress performances of the molten salt packed-bed thermal storage tank [J]. Energy Storage Science and Technology, 2022, 11(7): 2141-2150.
[3]	Wenlan YE, Ming ZHAO, Mingyu HU, Yang TIAN. Analysis of heat storage and release performance of tube bundle phase change heat accumulator [J]. Energy Storage Science and Technology, 2022, 11(7): 2151-2160.
[4]	Zhongbo LI, Jingxiao HAN, Chengcheng WANG, Hui YANG, Na YANG, Shaowu YIN, Li WANG, Lige TONG, Zhiwei TANG, Yulong DING. Simulation and the parameter influence relationship of the discharging process in a thermochemical reactor [J]. Energy Storage Science and Technology, 2022, 11(7): 2133-2140.
[5]	Hongtao LI, Shuai ZHANG, Xudong LI, Yunguang JI, Mingxu SUN, Xin LI. Application of single tank energy storage and heat exchange system in hot air non-woven fabric process [J]. Energy Storage Science and Technology, 2022, 11(7): 2250-2257.
[6]	WU Yuting, KOU Zhenfeng, ZHANG Cancan, WU Yiyang. Analysis of the dynamic distribution parameters of a solid sodium chloride column heat exchanger [J]. Energy Storage Science and Technology, 2022, 11(6): 1988-1995.
[7]	WU Xiaoling, ZHOU Tao, LIU Yuzhao, DU Yanping, CHEN Huiping, LI Shun. Numerical study on cooling enhancement of micro devices by designing turbulence based hollow micro pin-fin arrays with lateral holes [J]. Energy Storage Science and Technology, 2022, 11(6): 1980-1987.
[8]	Luyu GAN, Rusong CHEN, Hongyi PAN, Siyuan WU, Xiqian YU, Hong LI. Multiscale research strategy of lithium ion battery safety issue： Experimental and simulation methods [J]. Energy Storage Science and Technology, 2022, 11(3): 852-865.
[9]	Ang LI, Xiaomeng LI, Lin YANG, Han WANG, Junfan XIANG, Yuhan LIU. Compression force calculation of redox flow battery [J]. Energy Storage Science and Technology, 2022, 11(2): 609-614.
[10]	Hui TIAN, Dong HUA, Maoli MAN, Chunzhe LIU, Guojun LI, Xiongwen ZHANG. Numerical study on carbon deposition characteristics of planar solid oxide fuel cell [J]. Energy Storage Science and Technology, 2022, 11(1): 291-296.
[11]	Xiaoguang ZHANG, Xiaonan PAN, Jinming LI, Li LIU, Yan HE. Effect of battery arrangement on the phase change thermal management performance of lithium-ion battery packs [J]. Energy Storage Science and Technology, 2022, 11(1): 127-135.
[12]	Cong HE, Yuanwei LU, Wenbing SONG, Xiaotong CHEN, Yuting WU, Zhansheng FAN. The phase diagram prediction and experimental study of ternary same cation systems [J]. Energy Storage Science and Technology, 2021, 10(5): 1729-1734.
[13]	Xiaotong CHEN, Yuanwei LU, Cong HE, Wenbing SONG, Yuting WU, Guichun YANG. Heat-release stability of single tank molten salt heat storage system based on continuous regulation of heat exchange area [J]. Energy Storage Science and Technology, 2021, 10(5): 1753-1759.
[14]	Hui WANG, Jun LI, Peiwang ZHU, Jian WANG, Chunlin ZHANG. Hundred-megawatt molten salt heat storage system for deep peak shaving of thermal power plant [J]. Energy Storage Science and Technology, 2021, 10(5): 1760-1767.
[15]	Zheng LI, Zhen LIU, Huawei WU, Dongsheng XIE, Wei QIAN. The transient flow field characteristics of tangential leakage in scroll compressor [J]. Energy Storage Science and Technology, 2021, 10(5): 1579-1588.