Energy Storage Science and Technology ›› 2021, Vol. 10 ›› Issue (5): 1701-1708.doi: 10.19799/j.cnki.2095-4239.2021.0331

Previous Articles     Next Articles

The thermal storage and release kinetics of Co3O4/CoO redox reaction

Xiangyu HAN1,2(), Liang WANG1,2, Zhiwei GE1,2, Haoshu LING1,2, Xipeng LIN1,2, Haisheng CHEN1,2,3(), Long PENG4()   

  1. 1.Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100191, China
    2.University of Chinese Academy of Sciences, Beijing 100049, China
    3.Nanjing Institute of Future Energy System, Chinese Academy of Science, Nanjing 211135, Jiangsu, China
    4.National Energy Large Scale Physical Energy Storage Technologies R&D Center of Bijie High-tech Industrial Development Zone, Bijie 551712, Guizhou, China
  • Received:2021-07-12 Revised:2021-07-14 Online:2021-09-05 Published:2021-09-08

Abstract:

A Co3O4/CoO system has broad application prospects in the contexts of medium and high-temperature thermochemical energy storage due to its high-energy storage density and good reaction characteristics. This study used thermogravimetry and differential scanning calorimetry to study the influence of different oxygen concentrations and heating/cooling rates on the redox process of a Co3O4/CoO system and analyzed the reduction reaction kinetics. The experimental results showed that increasing the oxygen concentration and heating/cooling rate could increase the redox reaction rate. However, a higher oxygen concentration could inhibit the reduction reaction. The effects of oxygen concentration and heating rate on the enthalpy of the reduction were not obvious. The kinetic analysis results showed that the reduction reaction conformed to the Avrami-Erofeyev random nucleation model (A2). Following optimized calculation, a more accurate kinetic model of reduction reaction was obtained, which provided a theoretical basis for the design of a thermochemical energy storage reactor, based on metal oxide systems.

Key words: thermochemical energy storage, metal oxide systems, kinetics analysis

CLC Number: