储能科学与技术 ›› 2021, Vol. 10 ›› Issue (1): 40-49.doi: 10.19799/j.cnki.2095-4239.2020.0234

• 储能材料与器件 • 上一篇    下一篇

聚偏氟乙烯基凝胶聚合物电解质的研究进展

温荣严1,2,3(), 高志浩1,2,3, 门树林1,2,3, 戴作强1,2,3, 张健敏1,2,3()   

  1. 1.青岛大学机电工程学院
    2.青岛大学动力集成及储能系统工程技术中心
    3.电动汽车智能化动力集成技术国家地方联合工程研究中心(青岛),山东 青岛 266071
  • 收稿日期:2020-07-02 修回日期:2020-07-16 出版日期:2021-01-05 发布日期:2021-01-08
  • 作者简介:温荣严(1996—),女,硕士研究生,研究方向为聚合物功能膜材料,E-mail:2826332640@qq.com|张健敏,副教授,研究方向为聚合物功能膜材料,E-mail:zhangjm@qdu.edu.cn
  • 基金资助:
    中国博士后科学基金面上项目(2017M622133);青岛市科技计划项目青年专项(18-2-2-3-jch);山东省自然科学基金(ZR201709240128)

Research progress of polyvinylidene fluoride based gel polymer electrolyte

Rongyan WEN1,2,3(), Zhihao GAO1,2,3, Shulin MEN1,2,3, Zuoqiang DAI1,2,3, Jianmin ZHANG1,2,3()   

  1. 1.Qingdao University School of Mechanical and Electrical Engineering
    2.Power Integration and Energy Storage System Engineering Technology Center, Qingdao University
    3.National and Local Joint Engineering Research Center for Intelligent Power Integration Technology for Electric Vehicles (Qingdao), Qingdao 266071, Shandong, China
  • Received:2020-07-02 Revised:2020-07-16 Online:2021-01-05 Published:2021-01-08

摘要:

凝胶聚合物电解质(gel polymer electrolyte,GPE)作为液体电解质向固体电解质过渡的一个中间产物,因可以综合液体电解质和固体电解质的优点而受到广泛关注。聚偏氟乙烯及其共聚物聚偏氟乙烯-六氟丙烯拥有较高的介电常数,这有利于锂离子的电离、离子电导率的提高,进而能够改善锂离子电池的电化学性能,因此,是一种具有应用潜力的制备GPE的聚合物材料。本文综述了近五年基于聚偏氟乙烯GPE的研究进展,重点介绍了以下四类GPE:①基于聚偏氟乙烯以及聚偏氟乙烯-六氟丙烯的单一聚合物GPE;②与其他聚合物材料(如聚丙烯酸甲酯、聚间苯二甲酰胺、聚丙烯腈等)的复合GPE;③与无机纳米材料(如三氧化二铝、二氧化硅、氧化石墨烯等)复合的GPE;④其他新型(聚偏氟乙烯类聚合物与纤维素复合)的GPE研究进展。本文简述了各类复合GPE的优势和面临的挑战,最后,分析了基于聚偏氟乙烯GPE在产业化应用过程中面临的问题,并展望了此类GPE未来的发展方向和研究重点。

关键词: 锂离子电池, 凝胶聚合物电解质, 复合材料, PVDF, PVDF-HFP

Abstract:

In between liquid electrolyte and solid electrolyte, gel polymer electrolyte (GPE) has attracted enormous interests because it can combine the advantages of liquid electrolyte and solid electrolyte. Polyvinylidene fluoride and its copolymer polyvinylidene fluoride-hexafluoropropylene have a high dielectric constant, which is conducive to the ionization of lithium ions, the improvement of ion conductivity, and thus can improve the electrochemical performance of lithium ion batteries. Is a kind of polymer material with application potential for preparing GPE. This article introduces the research progress of GPE based on polyvinylidene fluoride in the past five years, It focuses on the following four categories of GPE: (1) single polymer GPE based on polyvinylidene fluoride or polyvinylidene fluoride-hexafluoropropylene, (2) polymer composite GPE with other polymers (such as polymethyl acrylate, Polyisophthalamide, polyacrylonitrile, etc.), (3) composite GPE with inorganic nanomaterials (such as Aluminum oxide, silicon dioxide, Graphene oxide, etc), and (4) other new Other new types (polyvinylidene fluoride polymer and cellulose composite) GPEs. This article briefly describes the advantages and challenges of various types of composite GPE. Finally, the key problems for GPE industrialization were analyzed and some prospects for the future research directions of GPE were proposed.

Key words: lithium ion battery, gel polymer electrolyte, composite material, PVDF, PVDF-HFP

中图分类号: