室温钠硫电池的发展现状和挑战

doi:10.19799/j.cnki.2095-4239.2023.0255

储能科学与技术 ›› 2023, Vol. 12 ›› Issue (5): 1315-1331.doi: 10.19799/j.cnki.2095-4239.2023.0255

• 喜迎东北大学建校百年-储能电池关键材料与循环技术专刊 • 上一篇下一篇

室温钠硫电池的发展现状和挑战

李社栋¹(), 宋莹莹², 边煜华¹, 刘朝孟¹, 高宣雯¹(), 骆文彬¹

^1.东北大学冶金学院
^2.东北大学医学与生物信息工程学院；辽宁沈阳 110000

收稿日期:2023-04-21 修回日期:2023-04-25 出版日期:2023-05-05 发布日期:2023-05-29
通讯作者: 高宣雯 E-mail:2201617@stu.neu.edu.cn;gaoxuanwen@mail.neu.edu.cn
作者简介:李社栋（1998—），男，硕士研究生，研究方向为室温钠硫电池正极材料，E-mail：2201617@stu.neu.edu.cn；
基金资助:
国家自然科学青年基金(52204308);中国博士后基金面上项目(ZX20220158);“兴辽英才”青年拔尖(XLYC2007155);中央高校基本科研业务费(N2025018);东北大学博士后基金(01270012810287)

Status and challenges in the development of room-temperature sodium-sulfur batteries

Shedong LI¹(), Yingying SONG², Yuhua BIAN¹, Zhaomeng LIU¹, Xuanwen GAO¹(), Wenbin LUO¹

^1.School of Metallurgy
^2.School of Medicine and BioInformation Engineering; Northeastern University, Shenyang 110000, Liaoning, China

Received:2023-04-21 Revised:2023-04-25 Online:2023-05-05 Published:2023-05-29
Contact: Xuanwen GAO E-mail:2201617@stu.neu.edu.cn;gaoxuanwen@mail.neu.edu.cn

摘要/Abstract

摘要：

室温钠硫(RT Na-S)电池的正负极材料为硫(S)和钠(Na)元素，S和Na元素具有成本低、资源丰富、能量密度高等一系列优点，因此室温钠硫电池被认为是一种极具潜力的可充电电池。但是在发展过程中面临着库仑效率低和循环稳定性差等一系列的问题，这些问题严重阻碍了室温钠硫电池的进一步发展和实际应用。有很多因素导致了这些问题，如S阴极的结构、隔膜和电解液等方面，其中最主要的原因是多硫化物的穿梭效应和多步反应缓慢的动力学。因此，基于近几年对RT Na-S电池已有的研究成果，本文从S在电解液中的氧化还原机理出发，总结了RT Na-S电池在S阴极的纳米结构设计、隔膜设计和电解液设计三个角度的发展现状，在此基础上列举了RT Na-S电池现发展阶段所面临的挑战。结果发现：(1) 目前绝大部分提高多硫化物（NaPSs）转化率的策略均以抑制穿梭效应，促进缓慢的动力学为主；(2) RT Na-S电池现阶段面临的挑战主要是S正极本质存在问题、电解液、巨大的体积变化以及多硫化物中间体引起的穿梭效应等。本文期望为RT Na-S电池的进一步发展和商业化提供新的思路。

关键词: 室温钠硫电池, 氧化还原机理, 纳米结构, 隔膜设计, 电解液设计

Abstract:

Room-temperature sodium-sulfur batteries (RT NA-S) consist of sulfur (S) and sodium (Na) as positive and negative electrode materials, respectively. Using S and Na elements as battery components is advantageous due to their low cost, abundance, and high energy density. Consequently, RT Na-S batteries have the potential as rechargeable batteries operating at room temperature. However, several problems, such as low coulomb efficiency and poor cycle stability, hinder the practical application and further development of RT Na-S batteries. In addition, the electrochemical performance of the Na-S battery is affected by various factors, including the structure of the S cathode, diaphragm, and electrolyte. Additionally, researchers must address the crucial issues of the shuttle effect of polysulfides and the slow kinetics of the multi-step reaction. This study summarizes recent research on RT Na-S batteries. It provides an overview of their current development status from the perspectives of nanostructure design, diaphragm design, and electrolyte design in the S cathode. The study begins by discussing the redox mechanism of S in the electrolyte. Furthermore, the study lists challenges of RT Na-S batteries during their current development stage. The results show that most strategies for improving the sodium polysulfide (NaPSs) conversion rate focus on inhibiting the shuttle effect and promoting slow kinetics. The main challenges facing RT Na-S batteries at present are related to the nature of the S-positive electrode, the electrolyte, the considerable volume change, and the shuttle effect caused by polysulfide intermediates. This study aims to provide new routes for the further development and commercialization of RT Na-S batteries.

Key words: room temperature sodium-sulfur battery, redox mechanism, nanostructures, diaphragm design, electrolyte design

中图分类号:

TM 911.15

李社栋, 宋莹莹, 边煜华, 刘朝孟, 高宣雯, 骆文彬. 室温钠硫电池的发展现状和挑战[J]. 储能科学与技术, 2023, 12(5): 1315-1331.

Shedong LI, Yingying SONG, Yuhua BIAN, Zhaomeng LIU, Xuanwen GAO, Wenbin LUO. Status and challenges in the development of room-temperature sodium-sulfur batteries[J]. Energy Storage Science and Technology, 2023, 12(5): 1315-1331.

图/表 10

图1

图2

图3

图4

图5

图6

图7

图8

图9

图10

参考文献 86

1	ONIFADE S T. Environmental impacts of energy indicators on ecological footprints of oil-exporting african countries: Perspectives on fossil resources abundance amidst sustainable development quests[J]. Resources Policy, 2023, 82: 103481.
2	LIANG Y R, ZHAO C Z, YUAN H, et al. A review of rechargeable batteries for portable electronic devices[J]. InfoMat, 2019, 1(1): 6-32.
3	缪平, 姚祯, LEMMON John, 等. 电池储能技术研究进展及展望[J]. 储能科学与技术, 2020, 9(3): 670-678.
	MIAO P, YAO Z, LEMMON JOHN, et al. Current situations and prospects of energy storage batteries[J]. Energy Storage Science and Technology, 2020, 9(3): 670-678.
4	ZHU Q, XU H F, SHEN K, et al. Efficient polysulfides conversion on Mo₂CT_x MXene for high-performance lithium-sulfur batteries[J].Rare Metals, 2022, 41(1): 311-318.
5	LIU Z M, WANG J, LU B G. Plum pudding model inspired KVPO4F@3DC as high-voltage and hyperstable cathode for potassium ion batteries[J]. Science Bulletin, 2020, 65(15): 1242-1251.
6	LEI Y J, WU C, LU X X, et al. Streamline sulfur redox reactions to achieve efficient room-temperature sodium-sulfur batteries[J]. Angewandte Chemie International Edition, 2022, 61(16):doi: 10.1002/anie.202200384.
7	MU J J, LIU Z M, LAI Q S, et al. An industrial pathway to emerging presodiation strategies for increasing the reversible ions in sodium-ion batteries and capacitors[J]. Energy Materials, 2022, 2(6): 200043.
8	WANG J, LIU Z M, ZHOU J, et al. Insights into metal/metalloid-based alloying anodes for potassium ion batteries[J]. ACS Materials Letters, 2021, 3(11): 1572-1598.
9	WANG C L, ZHANG Y, ZHANG Y W, et al. Stable sodium-sulfur electrochemistry enabled by phosphorus-based complexation[J]. Proceedings of the National Academy of Sciences of the United States of America, 2021, 118(49): https://doi.org/10.1073/pnas.2116184118.
10	WANG L F, WANG H Y, ZHANG S P, et al. Manipulating the electronic structure of nickel via alloying with iron: Toward high-kinetics sulfur cathode for Na-S batteries[J]. ACS Nano, 2021, 15(9): 15218-15228.
11	LIU Z M, WANG J, DING H B, et al. Carbon nanoscrolls for aluminum battery[J]. ACS Nano, 2018, 12(8): 8456-8466.
12	WANG Y, HUANG XIANG LONG, LIU H W, et al. Nanostructure engineering strategies of cathode materials for room-temperature Na-S batteries[J]. ACS Nano, 2022, 16(4): 5103-5130.
13	DU W Y, GAO W, YANG T T, et al. Cobalt nanoparticles embedded into free-standing carbon nanofibers as catalyst for room-temperature sodium-sulfur batteries[J]. Journal of Colloid and Interface Science, 2020, 565: 63-69.
14	ZHAI X J, YU Q P, LIU G S, et al. Hierarchical microsphere MOF arrays with ultralow Ir doping for efficient hydrogen evolution coupled with hydrazine oxidation in seawater[J]. Journal of Materials Chemistry A, 2021, 9(48): 27424-27433.
15	LI S P, ZENG Z Q, YANG J Q, et al. High performance room temperature sodium-sulfur battery by eutectic acceleration in tellurium-doped sulfurized polyacrylonitrile[J]. ACS Applied Energy Materials, 2019, 2(4): 2956-2964.
16	ZHANG L, ZHANG B W, DOU Y H, et al. Self-assembling hollow carbon nanobeads into double-shell microspheres as a hierarchical sulfur host for sustainable room-temperature sodium-sulfur batteries[J]. ACS Applied Materials & Interfaces, 2018, 10(24): 20422-20428.
17	ZHANG D, LI B, WANG S, et al. Simultaneous formation of artificial SEI film and 3D host for stable metallic sodium anodes[J]. ACS Applied Materials & Interfaces, 2017, 9(46): 40265-40272.
18	CHEN P, WANG C Y, WANG T Y. Review and prospects for room-temperature sodium-sulfur batteries[J]. Materials Research Letters, 2022, 10(11): 691-719.
19	YU X W, MANTHIRAM A. Capacity enhancement and discharge mechanisms of room-temperature sodium-sulfur batteries[J]. ChemElectroChem, 2014, 1(8): 1275-1280.
20	NG S F, LAU M Y L, ONG W J. Lithium-sulfur battery cathode design: Tailoring metal-based nanostructures for robust polysulfide adsorption and catalytic conversion[J]. Advanced Materials, 2021, 33(50): 2008654.
21	JANA M, XU R, CHENG X B, et al. Rational design of two-dimensional nanomaterials for lithium-sulfur batteries[J]. Energy & Environmental Science, 2020, 13(4): 1049-1075.
22	李书萍. 金属和共熔加速剂的设计及其在高性能锂/钠硫电池中的应用研究[D]. 武汉: 华中科技大学, 2019.
	LI S P. Design of metal and eutectic accelerator and its application in high performance lithium/sodium-sulfur battery[D]. Wuhan: Huazhong University of Science and Technology, 2019.
23	QI Y R, LI Q J, WU Y K, et al. A Fe3N/carbon composite electrocatalyst for effective polysulfides regulation in room-temperature Na-S batteries[J]. Nature Communications, 2021, 12: 6347.
24	DONG C W, ZHOU H Y, JIN B, et al. Enabling high-performance room-temperature sodium/sulfur batteries with few-layer 2H-MoSe₂embellished nitrogen-doped hollow carbon spheres as polysulfide barriers[J]. Journal of Materials Chemistry A, 2021, 9(6): 3451-3463.
25	LIU D J, HAN Z L, MA J Q, et al. Dual-confined SiOx encapsulated in PVA derived carbon layer and chitin derived N-doped carbon nanosheets for high-performance lithium storage[J]. Chemical Engineering Journal, 2021, 420: 129754.
26	PARK S K, KIM J K, KANG Y C. Excellent sodium-ion storage performances of CoSe₂ nanoparticles embedded within N-doped porous graphitic carbon nanocube/carbon nanotube composite[J]. Chemical Engineering Journal, 2017, 328: 546-555.
27	LIU Z M, WANG J, JIA X X, et al. Graphene armored with a crystal carbon shell for ultrahigh-performance potassium ion batteries and aluminum batteries[J]. ACS Nano, 2019, 13(9): 10631-10642.
28	WANG Y X, YANG J P, LAI W H, et al. Achieving high-performance room-temperature sodium-sulfur batteries with S@Interconnected mesoporous carbon hollow nanospheres[J]. Journal of the American Chemical Society, 2016, 138(51): 16576-16579.
29	HWANG T H, JUNG D S, KIM J S, et al. One-dimensional carbon-sulfur composite fibers for Na-S rechargeable batteries operating at room temperature[J]. Nano Letters, 2013, 13(9): 4532-4538.
30	杨婷婷. 室温钠硫电池正极材料的制备及电化学性能研究[D]. 重庆: 西南大学, 2020.
	YANG T T. Preparation and electrochemical properties of cathode materials for room temperature sodium-sulfur batteries[D]. Chongqing: Southwest University, 2020.
31	YANG W, YANG W, ZOU R, et al. Cellulose nanofiber-derived carbon aerogel for advanced room-temperature sodium-sulfur batteries[J]. Carbon Energy, 2023, 5(1): https://doi.org/10.1002/cey2.203.
32	YANG T T, GAO W, GUO B S, et al. A railway-like network electrode design for room temperature Na-S battery[J]. Journal of Materials Chemistry A, 2019, 7(1): 150-156.
33	叶鑫. 高性能室温钠硫电池正极材料的设计及性能研究[D]. 上海: 上海理工大学, 2021.
	YE X. Design and performance study of high performance cathode material for room temperature sodium-sulfur battery[D]. Shanghai: University of Shanghai for Science & Technology, 2021.
34	DU W Y, XU Q J, ZHAN R M, et al. Synthesis of hollow porous carbon microspheres and their application to room-temperature Na-S batteries[J]. Materials Letters, 2018, 221: 66-69.
35	CHEN Y M, LIANG W F, LI S, et al. A nitrogen doped carbonized metal-organic framework for high stability room temperature sodium-sulfur batteries[J]. Journal of Materials Chemistry A, 2016, 4(32): 12471-12478.
36	SUN Z X, WANG G J, KOH S W, et al. Solar-driven alkaline water electrolysis with multifunctional catalysts[J]. Advanced Functional Materials, 2020, 30(27): 2002138.
37	CARTER R, OAKES L, DOUGLAS A, et al. A sugar-derived room-temperature sodium sulfur battery with long term cycling stability[J]. Nano Letters, 2017, 17(3): 1863-1869.
38	XIAO F P, YANG X M, WANG H K, et al. Covalent encapsulation of sulfur in a MOF-derived S, N-doped porous carbon host realized via the vapor-infiltration method results in enhanced sodium-sulfur battery performance[J]. Advanced Energy Materials, 2020, 10(23): 2000931.
39	QIN G H, LIU Y T, HAN P Y,et al. High performance room temperature Na-S batteries based on FCNT modified Co₃C-Co nanocubes[J]. Chemical Engineering Journal, 2020, 396: 10.1016/j.cej.2020.125295.
40	LIU Y, LI X Y, SUN Y Z, et al. Macro-microporous carbon with a three-dimensional channel skeleton derived from waste sunflower seed shells for sustainable room-temperature sodium sulfur batteries[J]. Journal of Alloys and Compounds, 2021, 853: 157316.
41	ZHAO D C, JIANG S, YU S, et al. Lychee seed-derived microporous carbon for high-performance sodium-sulfur batteries[J]. Carbon, 2023, 201: 864-870.
42	SUN X, CHEN X Y, WANG Z, et al. Chitin-derived heteroatom-doped porous carbon for high-performance room-temperature Na-S batteries[J]. ACS Applied Energy Materials, 2022, 5(9): 11825-11834.
43	ZHANG B W, SHENG T, WANG Y X, et al. Long-life room-temperature sodium-sulfur batteries by virtue of transition-metal-nanocluster-sulfur interactions[J]. Angewandte Chemie International Edition, 2019, 58(5): 1484-1488.
44	JAYAN R, ISLAM M M. Single-atom catalysts for improved cathode performance in Na-S batteries: A density functional theory (DFT) study[J]. The Journal of Physical Chemistry C, 2021, 125(8): 4458-4467.
45	DU W Y, WU Y K, YANG T T, et al. Rational construction of rGO/VO₂ nanoflowers as sulfur multifunctional hosts for room temperature Na-S batteries[J]. Chemical Engineering Journal, 2020, 379: 122359.
46	WANG Y X, YANG J P, CHOU S L, et al. Uniform yolk-shell iron sulfide-carbon nanospheres for superior sodium-iron sulfide batteries[J]. Nature Communications, 2015, 6: 8689.
47	YAN Z C, LIANG Y R, HUA W B, et al. Multiregion Janus-featured cobalt phosphide-cobalt composite for highly reversible room-temperature sodium-sulfur batteries[J]. ACS Nano, 2020, 14(8): 10284-10293.
48	TANG W W, ZHONG W, WU Y K, et al. Vanadium carbide nanoparticles incorporation in carbon nanofibers for room-temperature sodium sulfur batteries: Confining, trapping, and catalyzing[J]. Chemical Engineering Journal, 2020, 395: 124978.
49	YE C, JIN H Y, SHAN J Q, et al. A Mo5N6 electrocatalyst for efficient Na₂S electrodeposition in room-temperature sodium-sulfur batteries[J]. Nature Communications, 2021, 12: 7195.
50	LIU H W, LAI W H, YANG Q R, et al. Understanding sulfur redox mechanisms in different electrolytes for room-temperature Na-S batteries[J].Nano-Micro Letters, 2021, 13(1): 1-14.
51	胡英瑛, 吴相伟, 温兆银. 储能钠硫电池的工程化研究进展与展望——提高电池安全性的材料与结构设计[J]. 储能科学与技术, 2021, 10(3): 781-799.
	HU Y Y, WU X W, WEN Z Y. Progress and prospect of engineering research on energy storage sodium sulfur battery-Material and structure design for improving battery safety[J]. Energy Storage Science and Technology, 2021, 10(3): 781-799.
52	LI H, ZHAO M, JIN B, et al. Mesoporous nitrogen-doped carbon nanospheres as sulfur matrix and a novel chelate-modified separator for high-performance room-temperature Na-S batteries[J]. Small, 2020, 16(29): 1907464.
53	ENG A Y S, KUMAR V, ZHANG Y W, et al. Room-temperature sodium-sulfur batteries and beyond: Realizing practical high energy systems through anode, cathode, and electrolyte engineering[J]. Advanced Energy Materials, 2021, 11(14): 2003493.
54	YAN J, LI W, WANG R X, et al. An in situ prepared covalent sulfur-carbon composite electrode for high-performance room-temperature sodium-sulfur batteries[J]. ACS Energy Letters, 2020, 5(4): 1307-1315.
55	LIM C Y J, ENG A Y S, HANDOKO A D, et al. Sulfurized cyclopentadienyl nanocomposites for shuttle-free room-temperature sodium-sulfur batteries[J]. Nano Letters, 2021, 21(24): 10538-10546.
56	ENG A Y S, WANG Y, NGUYEN D T, et al. Tunable nitrogen-doping of sulfur host nanostructures for stable and shuttle-free room-temperature sodium-sulfur batteries[J]. Nano Letters, 2021, 21(12): 5401-5408.
57	HAO Y, LI X F, SUN X L, et al. Nitrogen-doped graphene nanosheets/S composites as cathode in room-temperature sodium-sulfur batteries[J]. ChemistrySelect, 2017, 2(29): 9425-9432.
58	WANG S J, ZHAO S, GUO X, et al. 2D material-based heterostructures for rechargeable batteries[J]. Advanced Energy Materials, 2022, 12(4): doi: 10.1002/aenm.202100864.
59	YE X, RUAN J F, PANG Y P, et al. Enabling a stable room-temperature sodium-sulfur battery cathode by building heterostructures in multichannel carbon fibers[J]. ACS Nano, 2021, 15(3): 5639-5648.
60	ZHANG S, YAO Y, JIAO X,et al. Mo₂N-W₂N heterostructures embedded in spherical carbon superstructure as highly efficient polysulfide electrocatalysts for stable room-temperature Na-S batteries[J]. Advanced Materials, 2021, 33(43): doi: 10.1002/adma.202103846.
61	YU X W, MANTHIRAM A. Sodium-sulfur batteries with a polymer-coated NASICON-type sodium-ion solid electrolyte[J]. Matter, 2019, 1(2): 439-451.
62	BAUER I, KOHL M, ALTHUES H,et al. Shuttle suppression in room temperature sodium-sulfur batteries using ion selective polymer membranes[J]. Chem Commun, 2014, 50: 3208.
63	YU X, MANTHIRAM A. Performance enhancement and mechanistic studies of room-temperature sodium-sulfur batteries with a carbon-coated functional nafion separator and a Na₂S/activated carbon nanofiber cathode[J]. Chem Mater, 2016, 28: 896.
64	LIU H W, LAI W H, LEI Y J, et al. Electrolytes/interphases: Enabling distinguishable sulfur redox processes in room-temperature sodium-sulfur batteries[J]. Advanced Energy Materials, 2022, 12(6): 2103304.
65	YANG T T, GUO B S, DU W Y, et al. Design and construction of sodium polysulfides defense system for room-temperature Na-S battery[J]. Advanced Science, 2019, 6(23): 1901557.
66	YU X W, MANTHIRAM A. Performance enhancement and mechanistic studies of room-temperature sodium-sulfur batteries with a carbon-coated functional nafion separator and a Na₂S/activated carbon nanofiber cathode[J]. Chemistry of Materials, 2016, 28(3): 896-905.
67	CEYLAN CENGIZ E, ERDOL Z, SAKAR B, et al. Investigation of the effect of using Al₂O₃-nafion barrier on room-temperature Na-S batteries[J]. The Journal of Physical Chemistry C, 2017, 121(28): 15120-15126.
68	TANIBATA N, DEGUCHI M, HAYASHI A, et al. All-solid-state Na/S batteries with a Na₃PS₄ electrolyte operating at room temperature[J]. Chemistry of Materials, 2017, 29(12): 5232-5238.
69	BAO C Y, WANG B, LIU P, et al. Solid electrolyte interphases on sodium metal anodes[J]. Advanced Functional Materials, 2020, 30(52): 2004891.
70	YIM T, PARK M S, YU J S, et al. Effect of chemical reactivity of polysulfide toward carbonate-based electrolyte on the electrochemical performance of Li-S batteries[J]. Electrochimica Acta, 2013, 107: 454-460.
71	THOMAS P, GHANBAJA J, BILLAUD D. Electrochemical insertion of sodium in pitch-based carbon fibres in comparison with graphite in NaClO₄-ethylene carbonate electrolyte[J]. Electrochimica Acta, 1999, 45(3): 423-430.
72	GUO Q B, SUN S, KIM K I, et al. A novel one-step reactionsodium-sulfur battery with high areal sulfur loading on hierarchical porous carbon fiber[J]. Carbon Energy, 2021, 3(3): 440-448.
73	LE P M L, VO T D, PAN H L, et al. Excellent cycling stability of sodium anode enabled by a stable solid electrolyte interphase formed in ether-based electrolytes[J]. Advanced Functional Materials, 2020, 30(25): 2001151.
74	RYU H, KIM T, KIM K, et al. Discharge reaction mechanism of room-temperature sodium-sulfur battery with tetra ethylene glycol dimethyl ether liquid electrolyte[J]. Journal of Power Sources, 2011, 196(11): 5186-5190.
75	SEH Z W, SUN J, SUN Y M, et al. A highly reversible room-temperature sodium metal anode[J]. ACS Central Science, 2015, 1(8): 449-455.
76	WANG Y X, ZHANG B W, LAI W H, et al. Sodium-sulfur batteries: Room-temperature sodium-sulfur batteries: A comprehensive review on research progress and cell chemistry[J]. Advanced Energy Materials, 2017, 7(24): 1770140.
77	ESHETU G G, DIEMANT T, HEKMATFAR M, et al. Impact of the electrolyte salt anion on the solid electrolyte interphase formation in sodium ion batteries[J]. Nano Energy, 2019, 55: 327-340.
78	HAN Q G, LI X L, SHI X X, et al. Outstanding cycle stability and rate capabilities of the all-solid-state Li-S battery with a Li₇P₃S₁₁ glass-ceramic electrolyte and a core-shell S@BP2000 nanocomposite[J]. Journal of Materials Chemistry A, 2019, 7(8): 3895-3902.
79	NIKIFORIDIS G, VAN DE SANDEN M C M, TSAMPAS M N. High and intermediate temperature sodium-sulfur batteries for energy storage: Development, challenges and perspectives[J]. RSC Advances, 2019, 9(10): 5649-5673.
80	TANG B, JASCHIN P W, LI X, et al. Critical interface between inorganic solid-state electrolyte and sodium metal[J]. Materials Today, 2020, 41: 200-218.
81	ZHANG Z Z, WENZEL S, ZHU Y Z, et al. Na₃Zr₂Si₂PO₁₂: A stable Na⁺-ion solid electrolyte for solid-state batteries[J]. ACS Applied Energy Materials, 2020, 3(8): 7427-7437.
82	WANG X W, YANG Y, LAI C, et al. Dense-stacking porous conjugated polymer as reactive-type host for high-performance lithium sulfur batteries[J]. Angewandte Chemie International Edition, 2021, 60(20): 11359-11369.
83	LUO J M, LU X, MATIOS E, et al. Tunable MXene-derived 1D/2D hybrid nanoarchitectures as a stable matrix for dendrite-free and ultrahigh capacity sodium metal anode[J]. Nano Letters, 2020, 20(10): 7700-7708.
84	WANG Y, SHI H T, NIU J R, et al. Self-healing Sn₄P₃@Hard carbon Co-storage anode for sodium-ion batteries[J]. Journal of Alloys and Compounds, 2021, 851: 156746.
85	ENG A Y S, NGUYEN D T, KUMAR V, et al. Tailoring binder-cathode interactions for long-life room-temperature sodium-sulfur batteries[J]. Journal of Materials Chemistry A, 2020, 8(43): 22983-22997.
86	张斌伟, 魏子栋, 孙世刚. 室温钠硫电池硫化钠正极的发展现状与应用挑战[J]. 储能科学与技术, 2022, 11(9): 2811-2824.
	ZHANG B W, WEI Z D, SUN S G. The recent progress and future opportunities of Na₂S cathode for room temperature sodium sulfur batteries[J]. Energy Storage Science and Technology, 2022, 11(9): 2811-2824.

[1]	张斌伟, 魏子栋, 孙世刚. 室温钠硫电池硫化钠正极的发展现状与应用挑战[J]. 储能科学与技术, 2022, 11(9): 2811-2824.
[2]	梁菊梅, 郭雨萌, 王明暄, 希利德格, 张丽娟. 钠离子电池锡基金属氧化物研究进展[J]. 储能科学与技术, 2019, 8(5): 813-820.
[3]	郭玉国. “高能量密度纳米固态金属锂电池研究”项目介绍[J]. 储能科学与技术, 2016, 5(6): 919-921.

室温钠硫电池的发展现状和挑战

Status and challenges in the development of room-temperature sodium-sulfur batteries

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

图/表 10

参考文献 86

相关文章 3

编辑推荐

Metrics

本文评价