1 |
HA S J, CHUN U, PARK J Y, et al. Enhancement of aerodynamic performance through high pressure relief in the engine room for passenger car using cfd technique[J]. International Journal of Automotive Technology, 2017, 18(5): 779-784.
|
2 |
ZHAO X Q, LI Y K, LIU Z X, et al. Thermal management system modeling of a water-cooled proton exchange membrane fuel cell[J]. International Journal of Hydrogen Energy, 2015, 40(7): 3048-3056.
|
3 |
毛宗强. 氢能——我国未来的清洁能源[J]. 化工学报, 2004, 55(S1): 296-302.
|
|
MAO Z Q. Hydrogen—a future clean energy carrier in China[J]. Journal Fo Chemical Industry and Engineering, 2004, 55(S1): 296-302.
|
4 |
彭明, 夏强峰, 蒋理想, 等. 流道布置对风冷燃料电池性能影响的研究[J]. 化工学报, 2022, 73(10): 4625-4637.
|
|
PENG M, XIA Q F, JIANG L X, et al. Study on the effect of gas channel arrangement on the performance of air-cooled fuel cells[J]. CIESC Journal, 2022, 73(10): 4625-4637.
|
5 |
DE LAS HERAS A, VIVAS F J, SEGURA F, et al. Air-cooled fuel cells: Keys to design and build the oxidant/cooling system[J]. Renewable Energy, 2018, 125: 1-20.
|
6 |
王琦, 徐晓明, 司红磊, 等. 波形结构冷却流道对燃料电池热管理系统性能影响研究[J]. 中国工程机械学报, 2022, 20(2): 95-100.
|
|
WANG Q, XU X M, SI H L, et al. Study on the influence of waveform structure cooling channel on the performance of fuel cell thermal management system[J]. Chinese Journal of Construction Machinery, 2022, 20(2): 95-100.
|
7 |
TETUKO A P, SHABANI B, ANDREWS J. Thermal coupling of PEM fuel cell and metal hydride hydrogen storage using heat pipes[J]. International Journal of Hydrogen Energy, 2016, 41(7): 4264-4277.
|
8 |
SILVA A P, GALANTE R M, PELIZZA P R, et al. A combined capillary cooling system for fuel cells[J]. Applied Thermal Engineering, 2012, 41: 104-110.
|
9 |
陈飞, 罗仁宏. 基于模型预测控制的水冷型燃料电池冷却系统研究[J]. 汽车技术, 2021(7): 8-13.
|
|
CHEN F, LUO R H. Research on water-cooled fuel cell cooling system based on MPC[J]. Automobile Technology, 2021(7): 8-13.
|
10 |
陈思彤, 李微微, 王学科, 等. 相变材料用于质子交换膜燃料电池的热管理[J]. 化工学报, 2016, 67(S1): 1-6.
|
|
CHEN S T, LI W W, WANG X K, et al. Thermal management using phase change materials for proton exchange membrane fuel cells[J]. CIESC Journal, 2016, 67(S1): 1-6.
|
11 |
KIM J S, SHIN D H, YOU S M, et al. Thermal performance of aluminum vapor chamber for EV battery thermal management[J]. Applied Thermal Engineering, 2021, 185: 116337.
|
12 |
PATANKAR G, WEIBEL J A, GARIMELLA S V. Working-fluid selection for minimized thermal resistance in ultra-thin vapor chambers[J]. International Journal of Heat and Mass Transfer, 2017, 106: 648-654.
|
13 |
LI Y, ZHOU W J, LI Z X, et al. Experimental analysis of thin vapor chamber with composite wick structure under different cooling conditions[J]. Applied Thermal Engineering, 2019, 156: 471-484.
|
14 |
WANG H W, BAI P F, ZHOU H L, et al. An integrated heat pipe coupling the vapor chamber and two cylindrical heat pipes with high anti-gravity thermal performance[J]. Applied Thermal Engineering, 2019, 159: 113816.
|
15 |
王梦妍. 多热源蒸汽腔组件的传热性能研究[D]. 重庆: 重庆大学, 2019.
|
|
WANG M Y. Study on heat transfer performance of vapor chamber module with multiple chips[D]. Chongqing: Chongqing University, 2019.
|
16 |
HUANG G W, LIU W Y, LUO Y Q, et al. A novel ultra-thin vapor chamber for heat dissipation in ultra-thin portable electronic devices[J]. Applied Thermal Engineering, 2020, 167: 114726.
|
17 |
唐恒. 丝网吸液芯超薄热管制造及其传热性能研究[D]. 广州: 华南理工大学, 2018.
|
|
TANG H. Study on fabrication and heat transfer performance of ultra-thin heat pipe with copper mesh wick[D]. Guangzhou: South China University of Technology, 2018.
|
18 |
HUANG G W, LIU W Y, LUO Y Q, et al. Fabrication and thermal performance of mesh-type ultra-thin vapor chambers[J]. Applied Thermal Engineering, 2019, 162: 114263.
|
19 |
DE SCHEPPER S C K, HEYNDERICKX G J, MARIN G B. Modeling the evaporation of a hydrocarbon feedstock in the convection section of a steam cracker[J]. Computers & Chemical Engineering, 2009, 33(1): 122-132.
|
20 |
LEE W H. A pressure iteration scheme for two-phase flow modeling[R]. Los Alamos: Los Alamos Scientific Laboratory,1979.
|
21 |
HSIEH S S, LEE R Y, SHYU J C, et al. Analytical solution of thermal resistance of vapor chamber heat sink with and without pillar[J]. Energy Conversion and Management, 2007, 48(10): 2708-2717.
|
22 |
PANDIYAN S, JAYAKUMAR K, RAJALAKSHMI N, et al. Thermal and electrical energy management in a PEMFC stack-An analytical approach[J]. International Journal of Heat and Mass Transfer, 2008, 51(3/4): 469-473.
|
23 |
郭健忠, 罗仁宏, 王之丰, 等. 商用车发动机舱热管理一维/三维联合仿真与试验[J]. 中国机械工程, 2016, 27(4): 526-530.
|
|
GUO J Z, LUO R H, WANG Z F, et al. Test and 1D/3D co-simulation of thermal management for a commercial vehicle engine compartment[J]. China Mechanical Engineering, 2016, 27(4): 526-530.
|
24 |
GHASEMI M, RAMIAR A, RANJBAR A A, et al. A numerical study on thermal analysis and cooling flow fields effect on PEMFC performance[J]. International Journal of Hydrogen Energy, 2017, 42(38): 24319-24337.
|