锂电池百篇论文点评（2016.2.1—2016.3.31）

doi:10.3969/j.issn.2095-4239.2016.03.014

摘要/Abstract

摘要： 该文是一篇近两个月的锂电池文献评述，我们以“lithium”和“batter*”为关键词检索了Web of Science从2016年2月1日至2016年3月31日上线的锂电池研究论文，共有2241篇，选择其中89篇加以评论。正极材料主要研究了三元材料、富锂相材料和尖晶石材料的掺杂和表面包覆及界面层改进对其循环寿命的影响。高容量的硅基复合负极材料研究侧重于SEI界面层、复合材料、黏结剂及反应机理，电解液添加剂、固态电解质电池、锂硫电池、锂空气电池的论文也有多篇。理论模拟工作侧重于正极材料掺杂、SEI形成机理分析和固体电解质等。除了以材料为主的研究之外，还有多篇针对电池界面、电极结构和性能分析的研究论文。

关键词: 锂电池, 正极材料, 负极材料, 电解质, 电池技术

Abstract: This bimonthly review paper highlights 100 recent published papers on lithium batteries. We searched the Web of Science and found 2241 papers online from Feb. 1, 2016 to Mar. 31, 2016. 89 of them were selected to be highlighted. Layered oxide and high voltage spinel cathode materials are still under extensive investigations for influences of doping, coating and interface modifications on their cycling performances. Large efforts were devoted to Si based composite anode materials for analyzing the SEI and making nano structures. There are a few papers related to electrolyte additives, solid state lithium batteries, Li/S batteries, Li-air batteries, and modeling, and more papers for the charcterzations and calculations of doping to cathode materials, SEI and solid state electrolytes and batteries.
lithium batteries; cathode material; anode material; electrolyte; battery technology

Key words: lithium batteries, cathode material, anode material, electrolyte, battery technology

陈宇阳，胡飞，詹元杰，武怿达，赵俊年，陈彬，王昊，闫勇，俞海龙，贲留斌，刘燕燕，黄学杰. 锂电池百篇论文点评（2016.2.1—2016.3.31）[J]. 储能科学与技术, 2016, 5(3): 355-366.

CHEN Yuyang, HU Fei, ZHAN Yuanjie, WU Yida, ZHAO Junnian, CHEN Bin, WANG Hao, YAN Yong, YU Hailong, BEN Liubin, LIU Yanyan, HUANG Xuejie.

Reviews of selected 100 recent papers for lithium batteries（Feb. 1，2016 to Mar. 31，2016）

[J]. Energy Storage Science and Technology, 2016, 5(3): 355-366.

参考文献

[1] HAYASHI T，MIYAZAKI T，MATSUDA Y，et al. Effect of lithium-ion diffusibility on interfacial resistance of LiCoO₂ thin film electrode modified with lithium tungsten oxides[J]. Journal of Power Sources，2016，305：46-53.

[2] YANO A，UEDA A，SHIKANO M，et al. Surface structure and high-voltage charging/discharging performance of low-content Zr-oxide-coated LiNi_1/3Co_1/3Mn_1/3O₂[J]. Journal of the Electrochemical Society，2016，163（2）：A75-A82.

[3] CHIBA K，SHIKANO M，SAKAEBE H. Synthesis and electrochemical properties of Li_2/3Ni_1/3Mn_2/3O₂ as a novel 5 V class positive electrode material for lithium -ion batteries[J]. Journal of Power Sources，2016，304：60-63.

[4] BIAN X，FU Q，PANG Q，et al. Multi-functional surface engineering for Li-excess layered cathode material targeting excellent electrochemical and thermal safety properties[J]. ACS Applied Materials & Interfaces，2016，8（5）：3308-3318.

[5] YAN P，ZHENG J，ZHANG X，et al. Atomic to nanoscale investigation of functionalities of an Al₂O₃ coating layer on a cathode for enhanced battery performance[J]. Chemistry of Materials，2016，28（3）：857-863.

[6] KIM N Y，YIM T，SONG J H，et al. Microstructural study on degradation mechanism of layered LiNi_0.6Co_0.2Mn_0.2O₂ cathode materials by analytical transmission electron microscopy[J]. Journal of Power Sources，2016，307：641-648.

[7] FREIRE M，KOSOVA N V，JORDY C，et al. A new active Li-Mn-O compound for high energy density Li-ion batteries[J]. Nature Materials，2016，15（2）：173-177.

[8] MICHALAK B，BERKES B B，SOMMER H，et al. Gas evolution in LiNi_0.5Mn_1.5O₄/graphite cells studied in operando by a combination of differential electrochemical mass spectrometry, neutron imaging, and pressure measurements[J]. Analytical Chemistry，2016，88（5）：2877-2883.

[9] KOSAVA N V，BOBRIKOV I A，PODGOMOVA O A，et al. Peculiarities of structure, morphology, and electrochemistry of the doped 5-V spinel cathode materials LiNi_0.5–x Mn_1.5–yM_x_+yO₄(M = Co, Cr, Ti; x+y=0.05) prepared by mechanochemical way[J]. Journal of Solid State Electrochemistry，2016，20（1）：235-246.

[10] VISSERS D R，ISHEIM D，ZHAN C，et al. Understanding atomic scale phenomena within the surface layer of a long-term cycled 5 V spinet electrode[J]. Nano Energy，2016，19：297-306.

[11] FANG J C，XU Y F，XU G L，et al. Fabrication of densely packed LiNi_0.5Mn_1.5O₄ cathode material with excellent long-term cycleability for high-voltage lithium ion batteries[J]. Journal of Power Sources，2016，304：15-23.

[12] TAKAHASHI I，ARAI H，MURAYAMA H，et al. Phase transition kinetics of LiNi_0.5Mn_1.5O₄ analyzed by temperature-controlled operando X-ray absorption spectroscopy[J]. Physical Chemistry Chemical Physics，2016，18（3）：1897-1904.

[13] XIAO B，LIU J，SUN Q，et al. Unravelling the role of electrochemically active FePO₄ coating by atomic layer deposition for increased high-voltage stability of LiNi_0.5Mn_1.5O₄ cathode material[J]. Advanced Science，2015，2（5）：doi: 10.1002/advs. 201500022.

[14] GABRIELLI G，AXMANN P，WOHLFAHRT-MEHRENS M. Study of LiNi_0.5Mn_1.5O₄ morphological features for reduced electrolyte decomposition at high potential[J]. Journal of the Electrochemical Society，2016，163（3）：A470-A476.

[15] HU E，BAK S M，LIU Y，et al. Utilizing environmental friendly iron as a substitution element in spinel structured cathode materials for safer high energy lithium-ion batteries[J]. Advanced Energy Materials，2016，6（3）：doi: 10.1002/aenm.201501662.

[16] SUN P，MA Y，ZHAI T，et al. High performance LiNi_0.5Mn_1.5O₄ cathode by Al-coating and Al³⁺-doping through a physical vapor deposition method[J]. Electrochimica Acta，2016，191：237-246.

[17] WALLER G H，BROOKER P D，RAINWATER B H，et al. Structure and surface chemistry of Al₂O₃ coated LiMn₂O₄ nanostructured electrodes with improved lifetime[J]. Journal of Power Sources，2016，306：162-170.

[18] LIU H，WANG J，ZHANG X，et al. Morphological evolution of high-voltage spinel LiNi_0.5Mn_1.5O₄ cathode materials for lithium-ion batteries：The critical effects of surface orientations and particle size[J]. ACS Applied Materials & Interfaces，2016，8（7）：4661-4675.

[19] HWANG C，KIM T，NOH Y，et al. Synthesis, characterization, and electrochemical performance of V-doped Li₂MnSiO₄/C composites for Li-ion battery[J]. Materials Letters，2016，164：270-273.

[20] LI Z，PENG Z，ZHANG H，et al. 100-oriented LiFePO₄ nan of lakes toward high rate Li-ion battery cathode[J]. Nano Letters，2016，16（1）：795-799.

[21] FUKUTSUKA T，NAKAGAWA T，MIYAZAKI K，et al. Electrochemical properties of LiCoPO₄-thin film electrodes in LiF-based electrolyte solution with anion receptors[J]. Journal of Power Sources，2016，306：753-757.

[22] BOK T，CHO S J，CHOI S，et al. An effective coupling of nanostructured Si and gel polymer electrolytes for high-performance lithium-ion battery anodes[J]. RSC Advances，2016，6（9）：6960-6966.

[23] JUNG S C，KIM H J，KIM J H，et al. Atomic-level understanding toward a high-capacity and high power silicon oxide(SiO) material[J]. Journal of Physical Chemistry C，2016，120（2）：886-892.

[24] DUFEK E J，PICKER M，PETKOVIC L M. Density impact on performance of composite Si/graphite electrodes[J]. Journal of Applied Electrochemistry，2016，46（3）：359-367.

[25] HOROWITZ Y，HAN H L，ROSS P N，et al. In situ potentiodynamic analysis of the electrolyte/silicon electrodes interface reactions-a sum frequency generation vibrational spectroscopy study[J]. Journal of the American Chemical Society，2016，138（3）：726-729.

[26] LI Y，RAGHAVN R，WAGER N A，et al. Type I clathrates as novel silicon anodes：An electrochemical and structural investigation[J]. Advanced Science，2015，2（6）：doi: 10.1002/advs.201500057.

[27] BORDES A，DE-VITO E，HAON C，et al. Multiscale investigation of silicon anode Li insertion mechanisms by time- of -flight secondary ion mass spectrometer imaging performed on an in situ focused ion beam cross section[J]. Chemistry of Materials，2016，28（5）：1566-1573.

[28] BORDES A，DE-VITO E，HAON C，et al. Investigation of lithium insertion mechanisms of a thin-film si electrode by coupling time- of -flight secondary-ion mass spectrometry，X-ray photoelectron spectroscopy，and focused-ion-beam/SEM[J]. ACS Applied Materials & Interfaces，2015，7（50）：27853-27862.

[29] MICHAN A L，LESKES M，GREY C P. Voltage dependent solid electrolyte interphase formation in silicon electrodes：Monitoring the formation of organic decomposition products[J]. Chemistry of Materials，2016，28（1）：385-398.

[30] BUCUR C B，LITA A，OSADA N，et al. A soft, multilayered lithium-electrolyte interface[J]. Energy & Environmental Science，2016，9（1）：112-116.

[31] PENG Z，WANG S，ZHOU J，et al. Volumetric variation confinement：Surface protective structure for high cyclic stability of lithium metal electrodes[J]. Journal of Materials Chemistry A，2016，4（7）：2427-2432.

[32] TAN，J，TARTAKOVSKY A M，FERRIS K，et al. Investigating the effects of anisotropic mass transport on dendrite growth in high energy density lithium batteries[J]. Journal of the Electrochemical Society，2016，163（2）：A318-A327.

[33] HUFF L A，TAVASSOL H，ESBENSHADE J L，et al. Identification of Li-ion battery SEI compounds through Li and C solid-state MAS NMR spectroscopy and MALDI-T of mass spectrometry[J]. ACS Applied Materials & Interfaces，2016，8（1）：371-380.

[34] LI W，HU C，ZHOU M，et al. The electrochemical synthesis of LiNbO₂ in molten salts and its application for lithium ion batteries with high rate capability[J]. Electrochimica Acta，2016，189：231-236.

[35] LIANG Y，CHEN L，CAI L，et al. Strong contribution of pore morphology to the high-rate electrochemical performance of lithium-ion batteries[J]. Chemical Communications，2016，52（4）：803-806.

[36] BUROW D，SERGEEVA K，CALLES S，et al. Inhomogeneous degradation of graphite anodes in automotive lithium ion batteries under low-temperature pulse cycling conditions[J]. Journal of Power Sources，2016，307：806-814.

[37] LI N W，YIN Y X，YANG C P，et al. An artificial solid electrolyte interphase layer for stable lithium metal anodes[J]. Advanced Materials，2016，28（9）：1853-1858.

[38] ZHANG Q，PAN J，LU P，et al. Synergetic effects of inorganic components in solid electrolyte interphase on high cycle efficiency of lithium ion batteries[J]. Nano Letters，2016，16（3）：2011-2016.

[39] MA Q，ZHANG H，ZHOU C，et al. Single lithium-ion conducting polymer electrolytes based on a super-delocalized polyanion[J]. AngewandteChemie-International Edition，2016，55（7）：2521-2525.

[40] NAIR J R，DESTRO M，BELLA F，et al. Thermally cured semi-interpenetrating electrolyte networks (s-IPN) for safe and aging-resistant secondary lithium polymer batteries[J]. Journal of Power Sources，2016，306：258-267.

[41] KATO A，HAYASHI A，TATSUMISAGO M. Enhancing utilization of lithium metal electrodes in all-solid-state batteries by interface modification with gold thin films[J]. Journal of Power Sources，2016，309：27-32.

[42] PARK B，LEE C H，XIA C，et al. Characterization of gel polymer electrolyte for suppressing deterioration of cathode electrodes of Li ion batteries on high-rate cycling at elevated temperature[J]. Electrochimica Acta，2016，188：78-84.

[43] MOLINA-PIPER D，EVANS T，XU S，et al. Optimized silicon electrode architecture, interface, and microgeometry for next-generation lithium-ion batteries[J]. Advanced Materials，2016，28（1）：188-193.

[44] CHEN J，ZHANG H，WANG M，et al. Improving the electrochemical performance of high voltage spinel cathode at elevated temperature by a novel electrolyte additive[J]. Journal of Power Sources，2016，303：41-48.

[45] CHEN R，LIU F，CHEN Y，et al. An investigation of functionalized electrolyte using succinonitrile additive for high voltage lithium-ion batteries[J]. Journal of Power Sources，2016，306：70-77.

[46] WANG R，LI X，WANG Z，et al. Manganese dissolution from LiMn₂O₄ cathodes at elevated temperature：Methylene methanedisulfonate as electrolyte additive[J]. Journal of Solid State Electrochemistry，2016，20（1）：19-28.

[47] HOFMAN A，WERTH F，HOEWELING A，et al. Investigation of the oxidative stability of Li-ion battery electrolytes using cathode materials[J]. ECS Electrochemistry Letters，2015，4（12）：A141-A144.

[48] FORESTIER C，JANKOWSKI P，COSER L，et al. Facile reduction of pseudo-carbonates：Promoting solid electrolyte interphases with dicyanoketene alkylene acetals in lithium-ion batteries[J]. Journal of Power Sources，2016，303：1-9.

[49] MIAO R，YANG J，XU Z，et al. A new ether-based electrolyte for dendrite-free lithium-metal based rechargeable batteries[J]. Scientific Reports，2016，6：doi: 10.1038/srep21771.

[50] TRASK S E，PUPEK K Z，GILBERT J A，et al. Performance of full cells containing carbonate-based LiFSI electrolytes and silicon-graphite negative electrodes[J]. Journal of the Electrochemical Society，2016，163（3）：A345-A350.

[51] SAITO Y，MORIMURA W，KURATANI R，et al. Factors controlling the ionic mobility of lithium electrolyte solutions in separator membranes[J]. Journal of Physical Chemistry C，2016，120（7）：3619-3624.

[52] JAUMANN T，BALACH J，KLOSE M，et al. Role of 1,3-dioxolane and LiNO₃ addition on the long term stability of nanostructured silicon/carbon anodes for rechargeable lithium batteries[J]. Journal of the Electrochemical Society，2016，163（3）：A557-A564.

[53] HALL D S，NIE M，ELLIS L D，et al. Surface-electrolyte interphase formation in lithium-ion cells containing pyridine adduct additives[J]. Journal of the Electrochemical Society，2016，163（5）：A773-A780.

[54] HE M，BOULET-ROBLIN L，BOREL P，et al. Effects of solvent, lithium salt, and temperature on stability of carbonate-based electrolytes for 5.0 V LiNi_0.5Mn_1.5O₄ electrodes[J]. Journal of the Electrochemical Society，2016，163（2）：A83-A89.

[55] JUNG J，SONG K.，BAE Y，et al. Achieving outstanding Li⁺-ORR and -OER activities via edge- and corner-embedded bimetallic nanocubes for rechargeable Li-O₂ batteries[J]. Nano Energy，2015，18：71-80.

[56] LI X，WOLDEN C A，BAN C，et al. Facile synthesis of lithium sulfide nanocrystals for use in advanced rechargeable batteries[J]. ACS Applied Materials & Interfaces，2015，7（51）：28444-28451.

[57] HENDRICKSON K E，MA L，COHN G，et al. Model membrane-free Li-S batteries for enhanced performance and cycle life[J]. Advanced Science，2015，2（5）：doi: 10.1002/advs.201500068.

[58] FU C，WONG B M，BOZHILOV K N，et al. Solid state lithiation-delithiation of sulphur in sub-nano confinement：A new concept for designing lithium-sulphur batteries[J]. Chemical Science，2016，7（2）：1224-1232.

[59] LIANG S，LIANG C，XIA Y，et al. Facile synthesis of porous Li₂S@C composites as cathode materials for lithium-sulfur batteries[J]. Journal of Power Sources，2016，306：200-207.

[60] TAKAHASHI K，HIGA K，MAIR S，et al. Mechanical degradation of graphite/PVDF composite electrodes：A model-experimental study[J]. Journal of the Electrochemical Society，2016，163（3）：A385-A395.

[61] SCIPIONI R，JORGENSEN P S，NGO D T，et al. Electron microscopy investigations of changes in morphology and conductivity of LiFePO₄/C electrodes[J]. Journal of Power Sources，2016，307：259-269.

[62] MERLA Y，WU B，YUFIT V，et al. Novel application of differential thermal voltammetry as an in-depth state- of -health diagnosis method for lithium-ion batteries[J]. Journal of Power Sources，2016，307：308-319.

[63] SUZUKI K，BARBIELLINI B，ORIKASA Y，et al. Non-destructive measurement of in-operando lithium concentration in batteries via X-ray compton scattering[J]. Journal of Applied Physics，2016，119（2）：doi: 10.1063/1.4939304.

[64] DINH-NGUYEN M T，DELACOURT C. Investigation of the passivation properties of the solid electrolyte interphase using a soluble redox couple[J]. Journal of the Electrochemical Society，2016，163（5）：A706-A713.

[65] WANG C Y，ZHANG G，GE S，et al. Lithium-ion battery structure that self-heats at low temperatures[J]. Nature，2016，529（7587）：515-518.

[66] SUN X G，BI Z，LIU H，et al. A high performance hybrid battery based on aluminum anode and LiFePO₄ cathode[J]. Chemical Communications，2016，52（8）：1713-1716.

[67] GRUEBL D，JANEK J，BESSLER W G. Electrochemical pressure impedance spectroscopy (EPIS) as diagnostic method for electrochemical cells with gaseous reactants：A model-based analysis[J]. Journal of the Electrochemical Society，2016，163（5）：A599-A610.

[68] APPIAH W A，PARK J，VAN KHUE L，et al. Comparative study on experiments and simulation of blended cathode active materials for lithium ion batteries[J]. Electrochimica Acta，2016，187：422-432.

[69] HARUTA M，SHIRAKI S，OHSAWA T，et al. Preparation and in-situ characterization of well-defined solid electrolyte/electrode interfaces in thin-film lithium batteries[J]. Solid State Ionics，2016，285：118-121.

[70] DEY S，AYALEW B，PISU P. Nonlinear adaptive observer for a lithium-ion battery cell based on coupled electrochemical-thermal model[J]. Journal of Dynamic Systems Measurement And Control-Transactions of the Asme，2015，137（11）：doi: 10.1115/1.4030972.

[71] FRIDHOLM B，WIK T，NILSSON M. Robust recursive impedance estimation for automotive lithium-ion batteries[J]. Journal of Power Sources，2016，304：33-41.

[72] HOOPER J M，MARCO J，CHOUCHELAMANE G H，et al. Vibration durability testing of nickel manganese cobalt Oxide (NMC) lithium-ion 18650 battery cells[J]. Energies，2016，9（1）：doi:10.3390/en9010052.

[73] KAKIMOTO N，GOTO K. Capacity-fading model of lithium-ion battery applicable to multicell storage systems[J]. IEEE Transactions on Sustainable Energy，2016，7（1）：108-117.

[74] SCHINDLER S，BAUER M，PETZL M，et al. Voltage relaxation and impedance spectroscopy as in-operando methods for the detection of lithium plating on graphitic anodes in commercial lithium-ion cells[J]. Journal of Power Sources，2016，304：170-180.

[75] ABDOLLAHI A，HAN X，AWARI G V，et al. Optimal battery charging，Part I：Minimizing time-to-charge, energy loss, and temperature rise for OCV-resistance battery model[J]. Journal of Power Sources，2016，303：388-398.

[76] OH K Y，EPUREANU B I. A novel thermal swelling model for a rechargeable lithium-ion battery cell[J]. Journal of Power Sources，2016，303：86-96.

[77] CORTE DAD，CAILLON G，JORDY C，et al. Spectroscopic insight into Li-ion batteries during operation：An alternative infrared approach[J]. Advanced Energy Materials，2015，38（5）：1237-1240.

[78] LIU H，FOSTER J M，GULLY A，et al.Three-dimensional investigation of cycling-induced microstructural changes in lithium-ion battery cathodes using focused ion beam/scanning electron microscopy[J]. Journal of Power Sources，2016，306：300-308.

[79] NGUYEN D T，KANG J，NAM K M，et al. Understanding interfacial chemistry and stability for performance improvement and fade of high-energy Li-ion battery of LiNi_0.5Co_0.2Mn_0.3O₂/silicon-graphite[J]. Journal of Power Sources，2016，303：150-158.

[80] PHILIPPE B，HAHLIN M，EDSTROM K，et al. Photoelectron spectroscopy for lithium battery interface studies[J]. Journal of the Electrochemical Society，2016，163（2）：A178-A191.

[81] GE H，HUANG J，ZHANG J，et al. Temperature-adaptive alternating current preheating of lithium-ion batteries with lithium deposition prevention[J]. Journal of the Electrochemical Society，2016，163（2）：A290-A299.

[82] LUETH S，SAUTER U S，BESSLER W G. An agglomerate model of lithium-ion battery cathodes[J]. Journal of the Electrochemical Society，2016，163（2）：A210-A222.

[83] NELSON K J，ABARBANEL D W，XIA J，et al. Effects of upper cut of f potential on LaPO₄-coated and uncoated LiNi_0.42Mn_0.42Co_0.16 O₂/graphite pouch cells[J]. Journal of the Electrochemical Society，2016，163（2）：A272-A280.

[84] CHEN Y，SUN Y，HUANG X. Origin of the Ni/Mn ordering in high-voltage spinel LiNi_0.5Mn_1.5O₄：The role of oxygen vacancies and cation doping[J]. Computational Materials Science，2016，115：109-116.

[85] SUMITA M，TANAKA Y，IKEDA M，et al. Theoretical insight into charging process in a Li₃PO₄ (100)/LiFePO₄ (010) coherent interface system[J]. Solid State Ionics，2016，285：59-65.

[86] LIN Y X，LIU Z，LEUNG K，et al. Connecting the irreversible capacity loss in Li-ion batteries with the electronic insulating properties of solid electrolyte interphase (SEI) components[J]. Journal of Power Sources，2016，309：221-230.

[87] YOKOKAWA H. Thermodynamic stability of sulfide electrolyte/oxide electrode interface in solid-state lithium batteries[J]. Solid State Ionics，2016，285：126-135.

[88] DIXIT M，KOSA M，LAVIO S，et al. Thermodynamic and kinetic studies of LiNi_0.5Co_0.2Mn_0.3O₂ as a positive electrode material for Li-ion batteries using first principles[J]. Physical Chemistry Chemical Physics，2016，18（9）：6799-6812.

[89] LIU Z，QI Y，LIN Y X，et al. Interfacial study on solid electrolyte interphase at Li metal anode：Implication for Li dendrite growth[J]. Journal of the Electrochemical Society，2016，163（3）：A592-A598.