Numerical study on performance enhancement of latent heat storage unit

doi:10.3969/j.issn.2095-4239.2014.03.003

Abstract

Abstract: A three dimensional model for a shell-and-tube latent heat storage (LHS) unit was established to investigate the effect of liquid PCM natural convection on the performance. The enhancement effects of the outside enhanced tube and the bilateral enhanced tube were comparatively studied with the smooth tube. The results show that the natural convection can cause nonuniform distribution of solid-liquid interface and the nonuniformity can be weakened by using the designed enhanced tubes. At the same time, the presented enhanced tube can reduce the PCM melting time and total charging time. Compared with the PCM melting time of the smooth tube, the PCM melting time of the outside enhanced tube is reduced by 18.0% and the PCM melting time of the bilateral enhanced tube is reduced by 52.5%. In a conclusion, the presented finned enhanced tube can not only weaken the nonuniform distribution of solid-liquid interface caused by liquid PCM natural convection, but also enhance the LHS performance.

Key words: latent heat storage, natural convection, performance enhancement, enhanced heat transfer

CLC Number:

TK531.5

LIU Yongkun, TAO Yubing, TANG Zongbin. Numerical study on performance enhancement of latent heat storage unit[J]. Energy Storage Science and Technology, 2014, 3(3): 197-202.

References

[1] Adine H A,Qarnia H E. Numerical analysis of the thermal behaviour of a shell-and-tube heat storage unit using phase change materials[J]. Applied Mathematical Modelling ,2009,33(4):2134-2144.
[2] Zhao C Y,Wu Z G. Heat transfer enhancement of high temperature thermal energy storage using metal foams and expanded graphite[J]. Solar Energy Materials & Solar Cells ,2011,95(2):636-643.
[3] Wu Z G,Zhao C Y. Experimental investigations of porous materials in high temperature thermal energy storage systems[J]. Solar Energy ,2011,85(7):1371-1380.
[4] Yang J L,Du X Z,Yang L J,Yang Y P. Numerical analysis on the thermal behavior of high temperature latent heat thermal energy storage system[J]. Solar Energy ,2013,98,PartC:543-552.
[5] Lacroix M. Study of the heat transfer behavior of a latent heat thermal energy storage unit with a finned tube[J]. International Journal Heat Transfer ,1993,36(8):2083-2092.
[6] Castell A,Sole C,Medrano M, et al . Natural convection heat transfer coefficients in phase change material(PCM)modules with external vertical fins[J]. Applied Thermal Engineering ,2008,28(13):1676-1686.
[7] Tao Y B,He Y L,Qu Z G. Numerical study on performance of molten salt phase change thermal energy storage system with enhanced tubes[J]. Solar Energy ,2012,86:1155-1163.
[8] Mat S,Al-Abidi A A,Sopian K,Sulaiman M Y,Mohammad A T. Enhance heat transfer for PCM melting in triplex tube with internal-external fins[J]. Energy Conversion and Management ,2013,74:223-236.
[9] Al-Abidi A A,Mat S,Sopian K,Sulaiman M Y,Mohammad A T. Numerical study of PCM solidification in a triplex tube heat exchanger with internal and external fins[J]. International Journal of Heat and Mess Transfer ,2013,61:684-695.
[10] Dow Corning Corporation. Properties of syltherm 800 heat transfer liquid[R]. Michigan,1985.
[11] Gregory J Z,Louay M C,Walters D K. Correlating heat transfer and friction in helically-finned tubes using artificial neural networks[J]. International Journal of Heat and Mass Transfer ,2007,50(23-24):4713-4723.