Energy Storage Science and Technology ›› 2023, Vol. 12 ›› Issue (11): 3318-3329.doi: 10.19799/j.cnki.2095-4239.2023.0420
• Energy Storage Materials and Devices • Previous Articles Next Articles
Liyuan SHEN(), Guixin ZHANG, Zhaoling MA()
Received:
2023-06-14
Revised:
2023-09-01
Online:
2023-11-05
Published:
2023-11-16
Contact:
Zhaoling MA
E-mail:1609010833@qq.com;zhaolingma@163.com
CLC Number:
Liyuan SHEN, Guixin ZHANG, Zhaoling MA. Catalytic conversion performance study of O-doped NiCo2S4/CNT composites for Li polysulfides[J]. Energy Storage Science and Technology, 2023, 12(11): 3318-3329.
Fig. 9
(a) EIS diagrams of different functionalized separators; (b) charge/discharge curves of O-NiCo2S4/CNT at different multipliers; (c) multiplier performance diagrams of different functionalized separators; (d) charge/discharge curves of O-NiCo2S4/CNT at 0.2 C current density; (e) cycle performance of different functionalized separators at 0.2 C current density"
1 | GUO M, CAI S K. Impact of green innovation efficiency on carbon peak: Carbon neutralization under environmental governance constraints[J]. International Journal of Environmental Research and Public Health, 2022, 19(16): 10245. |
2 | CHU Z, CHENG M W, YU N N. A smart city is a less polluted city[J]. Technological Forecasting and Social Change, 2021, 172: 121037. |
3 | ZHAO F L, XUE J H, SHAO W, et al. Toward high-sulfur-content, high-performance lithium-sulfur batteries: Review of materials and technologies[J]. Journal of Energy Chemistry, 2023, 80: 625-657. |
4 | WANG L L, YE Y S, CHEN N, et al. Development and challenges of functional electrolytes for high-performance lithium-sulfur batteries[J]. Advanced Functional Materials, 2018, 28(38): 1800919-1800942. |
5 | WU X, LIU N N, GUO Z K, et al. Constructing multi-functional Janus separator toward highly stable lithium batteries[J]. Energy Storage Materials, 2020, 28: 153-159. |
6 | 马康, 高志浩, 骆林, 等. 锂硫电池隔膜在不同抑制"穿梭效应"策略中的研究进展[J]. 储能科学与技术, 2022, 11(11): 3521-3533. |
MA K, GAO Z H, LUO L, et al. Research progress of lithium-sulfur battery separator in different strategies to suppress shuttle effect[J]. Energy Storage Science and Technology, 2022, 11(11): 3521-3533. | |
7 | LI C, LIU R, XIAO Y, et al. Recent progress of separators in lithium-sulfur batteries[J]. Energy Storage Materials, 2021, 40: 439-460. |
8 | REN X D, LIU Z F, ZHANG M, et al. Review of cathode in advanced Li-S batteries: The effect of doping atoms at micro levels[J]. ChemElectroChem, 2021, 8(18): 3457-3471. |
9 | QIN J L, WANG R, XIAO P, et al. Engineering cooperative catalysis in Li-S batteries[J]. Advanced Energy Materials, 2023: 2300611. |
10 | CHEN G F, LI J H, LIU N, et al. Synthesis of nitrogen-doped oxygen-deficient TiO2- x/reduced graphene oxide/sulfur microspheres via spray drying process for lithium-sulfur batteries[J]. Electrochimica Acta, 2019, 326: 134968. |
11 | LI Y P, LEI D, JIANG T Y, et al. P-doped Co9S8 nanoparticles embedded on 3D spongy carbon-sheets as electrochemical catalyst for lithium-sulfur batteries[J]. Chemical Engineering Journal, 2021, 426: 131798. |
12 | LEI D, SHANG W Z, ZHANG X, et al. Competing reduction induced homogeneous oxygen doping to unlock MoS2 basal planes for faster polysulfides conversion[J]. Journal of Energy Chemistry, 2022, 73: 26-34. |
13 | LI S, XU P, ASLAM M K, et al. Propelling polysulfide conversion for high-loading lithium-sulfur batteries through highly sulfiphilic NiCo2S4 nanotubes[J]. Energy Storage Materials, 2020, 27: 51-60. |
14 | LU F, ZHOU M, LI W R, et al. Engineering sulfur vacancies and impurities in NiCo2S4 nanostructures toward optimal supercapacitive performance[J]. Nano Energy, 2016, 26: 313-323. |
15 | XIAO D J, LU C X, CHEN C M, et al. CeO2-webbed carbon nanotubes as a highly efficient sulfur host for lithium-sulfur batteries[J]. Energy Storage Materials, 2018, 10: 216-222. |
16 | SEO S D, PARK D, PARK S, et al. Lithium-sulfur batteries: "brain-coral-like" mesoporous hollow CoS2@N-doped graphitic carbon nanoshells as efficient sulfur reservoirs for lithium-sulfur batteries [J]. Advanced Functional Materials, 2019, 29(38): 1903712-1903723. |
17 | LI Y Y, WU H W, WU D H, et al. High-density oxygen doping of conductive metal sulfides for better polysulfide trapping and Li2S-S8 redox kinetics in high areal capacity lithium-sulfur batteries[J]. Advanced Science, 2022, 9(17): 2200840-2200853. |
18 | SHA L N, YE K, WANG G, et al. Rational design of NiCo2S4 nanowire arrays on nickle foam as highly efficient and durable electrocatalysts toward urea electrooxidation[J]. Chemical Engineering Journal, 2019, 359: 1652-1658. |
19 | ZHANG C Y, ZHANG C Q, PAN J L, et al. Surface strain-enhanced MoS2 as a high-performance cathode catalyst for lithium-sulfur batteries[J]. eScience, 2022, 2(4): 405-415. |
20 | QARAAH F A, MAHYOUB S A, HEZAM A, et al. Synergistic effect of hierarchical structure and S-scheme heterojunction over O-doped g-C3N4/N-doped Nb2O5 for highly efficient photocatalytic CO2 reduction[J]. Applied Catalysis B: Environmental, 2022, 315: 121585. |
21 | BAI X, LIU Z, LV H, et al. N-doped three-dimensional needle-like CoS2 bridge connection Co3O4 core-shell structure as high-efficiency room temperature NO2 gas sensor[J]. Journal of Hazardous Materials, 2022, 423: 127120. |
22 | LI L, CHEN L, MUKHERJEE S, et al. Phosphorene as a polysulfide immobilizer and catalyst in high-performance lithium-sulfur batteries[J]. Advanced Materials, 2017, 29(2): 1602734-1602742. |
23 | HE B, RAO Z X, CHENG Z X, et al. Rationally design a sulfur cathode with solid-phase conversion mechanism for high cycle-stable Li-S batteries[J]. Advanced Energy Materials, 2021, 11(14): 2003690. |
24 | YUE X Y, ZHANG J, BAO J, et al. Sputtered MoN nanolayer as a multifunctional polysulfide catalyst for high-performance lithium-sulfur batteries[J]. eScience, 2022, 2(3): 329-338. |
25 | SUN R, BAI Y, BAI Z, et al. Phosphorus vacancies as effective polysulfide promoter for high-energy-density lithium-sulfur batteries[J]. Advanced Energy Materials, 2022, 12(12): 2102739-2102751. |
26 | ZHANG H, ZHAO Z B, HOU Y N, et al. Highly stable lithium-sulfur batteries based on p-n heterojunctions embedded on hollow sheath carbon propelling polysulfides conversion[J]. Journal of Materials Chemistry A, 2019, 7(15): 9230-9240. |
27 | SABBAGHI A, LAM F L Y, CHEN G H, et al. Magneli Ti4O7 nanotube arrays as a free-standing efficient interlayer for fast-delivery and high-energy density lithium-sulfur batteries[J]. Journal of Alloys and Compounds, 2023, 960: 170874. |
28 | 王小飞, 蓝大为, 张道明, 等. 基于锂掺杂分子筛改性隔膜的高性能锂硫电池[J]. 储能科学与技术, 2022, 11(11): 3447-3454. |
WANG X F, LAN D W, ZHANG D M, et al. High performance lithium-sulfur battery based on lithium-doped molecular sieve modified diaphragm[J]. Energy Storage Science and Technology, 2022, 11(11): 3447-3454. | |
29 | WU H, JIANG H, YANG Y Q, et al. Cobalt nitride nanoparticle coated hollow carbon spheres with nitrogen vacancies as an electrocatalyst for lithium-sulfur batteries[J]. Journal of Materials Chemistry A, 2020, 8(29): 14498-14505. |
30 | ZHAO M, LI X Y, CHEN X, et al. Promoting the sulfur redox kinetics by mixed organodiselenides in high-energy-density lithium-sulfur batteries[J]. eScience, 2021, 1(1): 44-52. |
31 | WU H W, WANG L, BI J X, et al. Local concentration effect-derived heterogeneous Li2S2/Li2S deposition on dual-phase MWCNT/cellulose nanofiber/NiCo2S4 self-standing paper for high performance of lithium polysulfide batteries[J]. ACS Applied Materials & Interfaces, 2020, 12(13): 15228-15238. |
32 | CHEN L, SUN Y J, WEI X J, et al. Dual-functional V2C MXene assembly in facilitating sulfur evolution kinetics and Li-ion sieving toward practical lithium-sulfur batteries[J]. Advanced Materials, 2023, 35(26): 2300771-2300781. |
33 | YANG J Y, YU L H, ZHENG B B, et al. Carbon microtube textile with MoS2 nanosheets grown on both outer and inner walls as multifunctional interlayer for lithium-sulfur batteries[J]. Advanced Science, 2020, 7(21): 1903260-1903269. |
34 | LIN H B, YANG L Q, JIANG X, et al. Electrocatalysis of polysulfide conversion by sulfur-deficient MoS2 nanoflakes for lithium-sulfur batteries[J]. Energy & Environmental Science, 2017, 10(6): 1476-1486. |
35 | LIM W G, MUN Y, CHO A, et al. Synergistic effect of molecular-type electrocatalysts with ultrahigh pore volume carbon microspheres for lithium-sulfur batteries[J]. ACS Nano, 2018, 12(6): 6013-6022. |
[1] | Yinchen YANG, Shanling REN, Zhihong YANG, Yunhui WANG. First principles study of two-dimensional boron antimony films as anchoring materials for lithium-sulfur batteries [J]. Energy Storage Science and Technology, 2023, 12(9): 2760-2766. |
[2] | Shun ZHANG, Fanglei ZENG, Ning LI, Ningyi YUAN. Study on the preparation and properties of high-flame retardant sulfur cathode [J]. Energy Storage Science and Technology, 2023, 12(4): 1018-1024. |
[3] | Binwei ZHANG, Zidong WEI, Shigang SUN. The recent progress and future opportunities of Na2S cathode for room temperature sodium sulfur batteries [J]. Energy Storage Science and Technology, 2022, 11(9): 2811-2824. |
[4] | Yuqi SUN, Feng WEI, Hong ZHOU, Chaofeng ZHOU. Analysis of global lithium-sulfur battery technology competition from the perspective of patent [J]. Energy Storage Science and Technology, 2022, 11(5): 1657-1666. |
[5] | Kang MA, Zhihao GAO, Lin LUO, Xin SONG, Zuoqiang DAI, Tian HE, Jianmin ZHANG. Research progress on lithium-sulfur battery separators for different strategies to inhibit the “shuttle effect” [J]. Energy Storage Science and Technology, 2022, 11(11): 3521-3533. |
[6] | Xiaofei WANG, Dawei LAN, Daoming ZHANG, Haoliang XUE, Sifei ZHOU, Chuang LIU, Jun LI, Zhendong WANG. High-performance lithium-sulfur batteries enabled by a separator modified by lithium-doped zeolite [J]. Energy Storage Science and Technology, 2022, 11(11): 3447-3454. |
[7] | Bin XIE, Jia'nan SUN. Development of high specific energy lithium-sulfur cell module based on mechanical simulations [J]. Energy Storage Science and Technology, 2021, 10(2): 586-597. |
[8] | YE Ge, YUAN Hong, ZHAO Chenzi, ZHU Gaolong, XU Lei, HOU Lipeng, CHENG Xinbing, HE Chuanxin, NAN Haoxiong, LIU Quanbin, HUANG Jiaqi, ZHANG Qiang. Balance between ion migration and electron transport in composite cathodes for all-solid-state lithium-sulfur batteries [J]. Energy Storage Science and Technology, 2020, 9(2): 339-345. |
[9] | YAO Lin, ZHOU Ling, LI Shixiong, LI Xiaomin, HE Kai, HE Qingquan, ZAI Jiantao, REN Qizhi, QIAN Xuefeng. Edge-rich MoS2 nanosheets for high performance self-supporting Li-S batteries [J]. Energy Storage Science and Technology, 2019, 8(3): 523-531. |
[10] | HU Cejun, YANG Jijin, WANG Hangchao, CHEN Yifan, ZHANG Rongrong, LIU Wen, SUN Xiaoming. Research progress of safe lithium sulfur batteries [J]. Energy Storage Science and Technology, 2018, 7(6): 1082-1093. |
[11] | PEI Haijuan, GUO Rui, LI Yong, LIU Wen, CHEN Zhujun, WANG Yong, XIE Jingying. Conductive carbon-coated separator for high sulfur-loading lithium sulfur batteries [J]. Energy Storage Science and Technology, 2018, 7(1): 56-. |
[12] | YAN Changqing, CAO Yong. Patent analysis of lithium-sulfur battery technology in China [J]. Energy Storage Science and Technology, 2017, 6(S1): 74-. |
[13] | ZHAO Meng, XU Rui, HUANG Jiaqi, ZHANG Qiang. Flexible cathodes for lithium sulfur battery: A review [J]. Energy Storage Science and Technology, 2017, 6(3): 360-379. |
[14] | YUAN Huadong, LUO Jianmin, JIN Chengbin, SHENG Ouwei, HUANG Hui, ZHANG Wenkui, TAO Xinyong . Carbon materials with modified surfaces and interfaces for the high performance cathode of lithium sulfur batteries [J]. Energy Storage Science and Technology, 2017, 6(3): 380-410. |
[15] | SHANG Yongliang1, WANG Chengwen1, LIU Bin1, LIU Jun1,2, KE Xi1,2, LIU Liying1,2, SHI Zhicong1,2. Preparation and properties of manganese dioxide coated carbon nanotubes-sulfur composite cathode material [J]. Energy Storage Science and Technology, 2017, 6(3): 411-417. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||