[1] DENG D. Li-ion batteries: Basics, progress, and challenges[J]. Energy Science & Engineering, 2015, 3(5): 385-418.
[2] FEHSE M, VENTOSA E. Is TiO2 (B) the future of titanium-based battery materials[J].ChemPlusChem, 2015, 80(5): 785-795.
[3] VENTOSA E, CHUHMANN W. Scanning electrochemical microscopy of Li-ion batteries[J]. Physical Chemistry Chemical Physics, 2015, 17(43): 28441-28450.
[4] JANG D H, SHIN Y J, OH S M. Dissolution of spinel oxides and capacity losses in 4 V Li/Lix Mn2O4 cells[J]. Journal of the Electrochemical Society, 1996, 143(7): 2204-2211.
[5] KOMABA S, KUMAGAI N, KATAOKA Y. Influence of manganese (II), cobalt(II), and nickel(II) additives in electrolyte on performance of graphite anode for lithium-ion batteries[J]. Electrochimica Acta, 2002, 47(8): 1229-1239.
[6] VERMA P, MAIRE P, NOVÁK P. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries[J]. Electrochimica Acta, 2010, 55(22): 6332-6341.
[7] HARDWICK L J, HOLZAPFEL M, NOVÁK P, et al. Electrochemical lithium insertion into anatase-type TiO2: An in situ Raman microscopy investigation[J]. Electrochimica Acta, 2007, 52(17): 5357-5367.
[8] NELSON J, MISRA S, YANG Y, et al. In operando X-ray diffraction and transmission X-ray microscopy of lithium sulfur batteries[J]. Journal of the American Chemical Society, 2012, 134(14): 6337-6343.
[9] DUPRÉ N, GREY C P, PARISE J B, et al. Short-and long-range order in the positive electrode material, Li(NiMn)0.5O2: A joint X-ray and neutron diffraction, pair distribution function analysis and NMR study[J]. Journal of the American Chemical Society, 2005, 127(20): 7529-7537.
[10] MAIYALAGAN T, DONG X, CHEN P, et al. Electrodeposited Pt on three-dimensional interconnected graphene as a free-standing electrode for fuel cell application[J]. Journal of Materials Chemistry, 2012, 22(12): 5286-5290.
[11] LIU N, WU H, MCDOWELL M T, et al. A yolk-shell design for stabilized and scalable Li-ion battery alloy anodes[J]. Nano letters, 2012, 12(6): 3315-3321.
[12] YOU J, DOU L, YOSHIMURA K, et al. A polymer tandem solar cell with 10.6% power conversion efficiency[J]. Nature Communications, 2013, 4(1446): 66-78.
[13] BUQA H, WÜRSIG A, VETTER J, et al. SEI film formation on highly crystalline graphitic materials in lithium-ion batteries[J]. Journal of Power Sources, 2006, 153(2): 385-390.
[14] NIE M, CHALASANI D, ABRAHAM D P, et al. Lithium ion battery graphite solid electrolyte interphase revealed by microscopy and spectroscopy[J]. The Journal of Physical Chemistry C, 2013, 117(3): 1257-1267.
[15] BECKER C R, STRAWHECKER K E, MCALLISTER Q P, et al. In situ atomic force microscopy of lithiation and delithiation of silicon nanostructures for lithium ion batteries[J]. ACS Nano, 2013, 7(10): 9173-9182.
[16] COFFEY D C, REID O G, RODOVSKY D B, et al. Mapping local photocurrents in polymer/fullerene solar cells with photoconductive atomic force microscopy[J]. Nano Letters, 2007, 7(3): 738-744.
[17] DUAN W, VEMURI R S, MILSHTEIN J D, et al. A symmetric organic-based nonaqueous redox flow battery and its state of charge diagnostics by FTIR[J]. Journal of Materials Chemistry A, 2016, 4(15): 5448-5456.
[18] LAI S C S, MACPHERSON J V, UNWIN P R. In situ scanning electrochemical probe microscopy for energy applications[J]. MRS Bulletin, 2012, 37(7): 668-674.
[19] LIU H Y, FAN F R F, LIN C W, et al. Scanning electrochemical and tunneling ultramicroelectrode microscope for high-resolution examination of electrode surfaces in solution[J]. Journal of the American Chemical Society, 1986, 108(13): 3838-3839.
[20] BARD A J, DENUAULT G, LEE C, et al. Scanning electrochemical microscopy—A new technique for the characterization and modification of surfaces[J]. Accounts of Chemical Research, 1990, 23(11): 357-363.
[21] YIN Qihe. Fundamental and application of scanning electrochemical microscopy[J]. Journal of the Graduates Sun Yat-Sen University(Natural Science and Medicine), 2011, 32(2): 46-60.
[22] DENG H, PELJO P, MOMOTENKO D, et al. Kinetic differentiation of bulk/interfacial oxygen reduction mechanisms at/near liquid/liquid interfaces using scanning electrochemical microscopy[J]. Journal of Electroanalytical Chemistry, 2014, 732: 101-109.
[23] RITZERT N L, RODRIGUEZ-LOPEZ J, TAN C, et al. Kinetics of interfacial electron transfer at single-layer graphene electrodes in aqueous and nonaqueous solutions[J]. Langmuir, 2013, 29(5): 1683-1694.
[24] AHMED S, JI S, PETRIK L, et al. Scanning electrochemical microscopic study of hydrogen oxidation and evolution at electrochemically deposited Pt nanoparticulate electrode incorporated in polyaniline[J]. Analytical Sciences, 2004, 20(9): 1283-1287.
[25] WEI C, BARD A J, MIRKIN M V. Scanning electrochemical microscopy. 31. application of SECM to the study of charge transfer processes at the liquid/liquid interface[J]. The Journal of Physical Chemistry, 1995, 99(43): 16033-16042.
[26] KURULUGAMA R T, WIPF D O, TAKACS S A, et al. Scanning electrochemical microscopy of model neurons: Constant distance imaging[J]. Analytical Chemistry, 2005, 77(4): 1111-1117.
[27] WANG W, XIONG Y, DU F Y, et al. Imaging and detection of morphological changes of single cells before and after secretion using scanning electrochemical microscopy[J]. Analyst, 2007, 132(6): 515-518.
[28] SÁNCHEZ C M, SOLLA G J, VIDAL I F J, et al. Imaging structure sensitive catalysis on different shape-controlled platinum nanoparticles[J]. Journal of the American Chemical Society, 2010, 132(16): 5622-5624.
[29] LU G, COOPER J S, MCGINN P J. SECM imaging of electrocatalytic activity for oxygen reduction reaction on thin film materials[J]. Electrochimica Acta, 2007, 52(16): 5172-5181.
[30] KHAMIS D, MAHÉ E, DARDOIZE F, et al. Peroxodisulfate generation on boron-doped diamond microelectrodes array and detection by scanning electrochemical microscopy[J]. Journal of Applied Electrochemistry, 2010, 40(10): 1829-1838.
[31] FERNANDEZ J L, BARD A J. Scanning electrochemical microscopy 50. Kinetic study of electrode reactions by the tip generation- substrate collection mode[J]. Analytical Chemistry, 2004, 76(8): 2281-2289.
[32] ECKHARD K, CHEN X, TURCU F, et al. Redox competition mode of scanning electrochemical microscopy(RC-SECM) for visualisation of local catalytic activity[J]. Physical Chemistry Chemical Physics, 2006, 8(45): 5359-5365.
[33] ZHANG J, UNWIN P R. Microelectrochemical measurements of electron transfer rates at the interface between two immiscible electrolyte solutions: Potential dependence of the ferro/ferricyanide-7, 7,8,8-tetracyanoquinodimethane (TCNQ)/TCNQ-system[J]. Physical Chemistry Chemical Physics, 2002, 4(15): 3820-3827.
[34] ZHANG Z, YUAN Y, SUN P, et al. Study of electron-transfer reactions across an externally polarized water/1,2-dichloroethane interface by scanning electrochemical microscopy[J]. The Journal of Physical Chemistry B, 2002, 106(26): 6713-6717.
[35] LI F, UNWIN P R. Scanning electrochemical microscopy(SECM) of photoinduced electron transfer kinetics at liquid/liquid interfaces[J]. The Journal of Physical Chemistry C, 2015, 119 (8): 4031-4043.
[36] HOLT K B, BARD A J, SHOW Y, et al. Scanning electrochemical microscopy and conductive probe atomic force microscopy studies of hydrogen-terminated boron-doped diamond electrodes with different doping levels[J]. The Journal of Physical Chemistry B, 2004, 108 (39): 15117-15127.
[37] LAFORGE F O O, VELMURUGAN J, WANG Y, et al. Nanoscale imaging of surface topography and reactivity with the scanning electrochemical microscope[J]. Analytical Chemistry, 2009, 81(8): 3143-3150.
[38] SIDANE D, TOUZET M, DEVOS O, et al. Investigation of the surface reactivity on a 304L tensile notched specimen using scanning electrochemical microscopy[J]. Corrosion Science, 2014, 87: 312-320.
[39] PUST S E, MAIER W, WITTSTOCK G. Investigation of localized catalytic and electrocatalytic processes and corrosion reactions with scanning electrochemical microscopy(SECM)[J]. Zeitschrift Für Physikalische Chemie International Journal of Research in Physical Chemistry and Chemical Physics, 2008, 222(10): 1463-1517.
[40] ZHANG J, JIA J, HAN L, et al. Kinetic investigation on the confined etching system of n-type gallium arsenide by scanning electrochemical microscopy[J]. The Journal of Physical Chemistry C, 2014, 118(32): 18604-18611.
[41] MANDLER D, BARD A J. High resolution etching of semiconductors by the feedback mode of the scanning electrochemical microscope[J]. Journal of the Electrochemical Society, 1990, 137(8): 2468-2472.
[42] CHEN X, BOTZ A J R, MASA J, et al. Characterisation of bifunctional electrocatalysts for oxygen reduction and evolution by means of SECM[J]. Journal of Solid State Electrochemistry, 2015, 20(4): 1019-1027.
[43] ZHANG F, ROZNYATOVSKIY V, FAN F R, et al. A method for rapid screening of photosensitizers by scanning electrochemical microscopy(SECM) and the synthesis and testing of a porphyrin sensitizer[J]. The Journal of Physical Chemistry C, 2011, 115(5): 2592-2599.
[44] MARTIN C J, BOZIC-WEBER B, CONSTABLE E C, et al. Development of scanning electrochemical microscopy(SECM) techniques for the optimization of dye sensitized solar cells[J]. Electrochimica Acta, 2014, 119: 86-91.
[45] JOHNSON L, WALSH D A. Tip generation-substrate collection-tip collection mode scanning electrochemical microscopy of oxygen reduction electrocatalysts[J]. Journal of Electroanalytical Chemistry, 2012, 682: 45-52.
[46] XU F, BEAK B, JUNG C. In situ electrochemical studies for Li+ ions dissociation from the LiCoO2 electrode by the substrate-generation/ tip-collection mode in SECM[J]. Journal of Solid State Electrochemistry, 2011, 16(1): 305-311.
[47] SNOOK G A, HUYNH T D, BEST A S. SECM dissolution studies of pasted battery cathodes in ionic liquid electrolytes[J]. ECS Transactions, 2014, 58(36): 1-8.
[48] LUNG-HAO HU B, WU F Y, LIN C T, et al. Graphene-modified LiFePO4 cathode for lithium ion battery beyond theoretical capacity[J]. Nature Communications, 2013, 4: 1687.
[49] ZHAO Y, PENG L, LIU B, et al. Single-crystalline LiFePO4 nanosheets for high-rate Li-ion batteries[J]. Nano Letters, 2014, 14(5): 2849-2853.
[50] NOEROCHIM L, YURWENDRA A O, SUSANTI D. Effect of carbon coating on the electrochemical performance of LiFePO4/C as cathode materials for aqueous electrolyte lithium-ion battery[J]. Ionics, 2015, 22(3): 341-346.
[51] HOU Y, WANG X, ZHU Y, et al. Macroporous LiFePO4 as a cathode for an aqueous rechargeable lithium battery of high energy density[J]. Journal of Materials Chemistry A, 2013, 1(46): 14713-14718.
[52] TAKAHASHI Y, KUMATANI A, MUNAKATA H, et al. Nanoscale visualization of redox activity at lithium-ion battery cathodes[J]. Nature Communications, 2014, 5: 5450.
[53] BARTON Z J, RODRIGUEZ-LOPEZ J. Lithium ion quantification using mercury amalgams as in situ electrochemical probes in nonaqueous media[J]. Analytical Chemistry, 2014, 86(21): 10660-10667.
[54] ZAMPARDI G, VENTOSA E, LA MANTIA F, et al. Scanning electrochemical microscopy applied to the investigation of lithium (De-) insertion in TiO2[J]. Electroanalysis, 2015, 27(4): 1017-1025.
[55] ZAMPARDI G, VENTOSA E, LA MANTIA F, et al. In situ visualization of Li-ion intercalation and formation of the solid electrolyte interphase on TiO2 based paste electrodes using scanning electrochemical microscopy[J]. Chemical Communications, 2013, 49(81): 9347-9349.
[56] ZAMPARDI G, KLINK S, KUZNETSOV V, et al. Combined AFM/SECM investigation of the solid electrolyte interphase in Li-ion batteries[J]. ChemElectroChem, 2015, 2(10): 1607-1611.
[57] BÜLTER H, PETERS F, SCHWENZEL J, et al. Spatiotemporal changes of the solid electrolyte interphase in lithium-ion batteries detected by scanning electrochemical microscopy[J]. Angewandte Chemie International Edition, 2014, 53(39): 10531-10535.
[58] BÜLTER H, PETERS F, SCHWENZEL J, et al. In situ quantification of the swelling of graphite composite electrodes by scanning electrochemical microscopy[J]. Journal of the Electrochemical Society, 2015, 163(2): A27-A34.
[59] VENTOSA E, WILDE P, ZINN A H, et al. Understanding surface reactivity of Si electrodes in Li-ion batteries by in-operando scanning electrochemical microscopy[J]. Chemical Communications, 2016: 6825-6828.
|