锂电池百篇论文点评(2018.6.1-2018.7.31)

doi:10.12028/j.issn.2095-4239.2018.0152

摘要/Abstract

摘要： 该文是一篇近两个月的锂电池文献评述，我们以"lithium"和"batter^*"为关键词检索了Web of Science从2018年6月1日至2018年7月31日上线的锂电池研究论文，共1706篇，选择其中100篇加以评论。正极材料主要研究了层状材料的结构演变及表面包覆对层状和尖晶石材料循环寿命的影响。高容量的硅、锡基负极材料研究侧重于纳米材料、复合材料、黏结剂及反应机理研究，金属锂负极、固态电解质、锂空电池、锂硫电池的论文也有多篇。理论模拟工作包括材料体相、界面结构和输运性质，除了以材料为主的研究之外，针对电池的原位分析、电池模型的研究论文也有多篇。

关键词: 锂电池, 正极材料, 负极材料, 电解质, 电池技术

Abstract: This bimonthly review paper highlights 100 recent published papers on lithium batteries. We searched the Web of Science and found 1706 papers online from Jun. 1,2018 to Jul. 31,2018. 100 of them were selected to be highlighted. Layered oxide and high voltage spinel cathode materials are still under extensive investigations for the structure evolution and modifications. Large efforts were devoted to Si based anode material. There are a few papers related to solid state electrolyte, Li/S battery, Li-air battery, all solid state batteries analyses, theoretical simulations, and modeling.

Key words: lithium batteries, cathode material, anode material, electrolyte, battery technology

中图分类号:

TM911

詹元杰, 武怿达, 赵俊年, 金周, 张华, 起文斌, 田丰, 贲留斌, 俞海龙, 刘燕燕, 黄学杰. 锂电池百篇论文点评(2018.6.1-2018.7.31)[J]. 储能科学与技术, 2018, 7(5): 869-880.

ZHAN Yuanjie, WU Yida, ZHAO Junnian, JIN Zhou, ZHANG Hua, QI Wenbin, TIAN Feng, BEN Liubin, YU Hailong, LIU Yanyan, HUANG Xuejie. Reviews of selected 100 recent papers for lithium batteries (Jun. 1, 2018 to Jul. 31, 2018)[J]. Energy Storage Science and Technology, 2018, 7(5): 869-880.

参考文献

[1] HE T, LU Y, SU Y F, et al. Sufficient utilization of zirconium ions to improve the structure and surface properties of nickel-rich cathode materials for lithium-ion batteries[J]. ChemSusChem, 2018, 11(10):1639-1648.
[2] ZHAO Q, QIN X L, ZHAO H B, et al. A novel prediction method based on the support vector regression for the remaining useful life of lithium-ion batteries[J]. Microelectronics Reliability, 2018, 85:99-108.
[3] LIANG J Y, ZENG X X, ZHANG X D, et al. Mitigating interfacial potential drop of cathode-solid electrolyte via ionic conductor layer to enhance interface dynamics for solid batteries[J]. Journal of the American Chemical Society, 2018, 140(22):6767-6770.
[4] LI W D, LIU X M, CELIO H, et al. Mn versus Al in layered oxide cathodes in lithium-ion batteries:A comprehensive evaluation on long-term cyclability[J]. Advanced Energy Materials, 2008, 8(15):doi:10.1002/aenm.201703154.
[5] YOU Y, CELIO H, LI J Y, et al. Modified high-nickel cathodes with stable surface chemistry against ambient air for lithium-ion batteries[J]. Angewandte Chemie-International Edition, 2018, 57(22):6480-6485.
[6] CAMBAZ M A, VINAYAN B P, EUCHNER H, et al. Design of nickel-based cation-disordered rock-salt oxides:The effect of transition metal (M=V, Ti, Zr) substitution in LiNi_0.5M_0.5O₂ binary systems[J]. ACS Applied Materials & Interfaces, 2018, 10(26):21957-21964.
[7] ZHANG X D, SHI J L, LIANG J Y, et al. Suppressing surface lacttice oxygen release of Li-rich cathode materials via heterostructure spinel Li₄Mn₅O₁₂ coating[J]. Advanced Materials, 2018, 30(29):doi:10.1002/adma.201801751.
[8] BI K, ZHAO S X, HUANG C, et al. Improving low-temperature performance of spinel LiNi_0.5Mn_1.5O₄ electrode and LiNi_0.5Mn_1.5O₄/Li₄Ti₅O₁₂ full-cell by coating solid-state electrolyte for Li-Al-Ti-P-O[J]. Journal of Power Sources, 2018, 389:240-248.
[9] FENG S P, KONG X, SUN H Y, et al. Effect of Zr doping on LiNi_0.5Mn_1.5O₄ with ordered or disordered structures[J]. Journal of Alloys and Compounds, 2018, 749:1009-1018.
[10] BINI M, BONI P, MUSTARELLI P, et al. Silicon-doped LiNi_0.5Mn_1.5O₄ as a high-voltage cathode for Li-ion batteries[J]. Solid State Ionics, 2018, 320:1-6.
[11] DENG M M, TANG Z F, SHAO Y, et al. Enhancing the electrochemical performances of LiNi_0.5Mn_1.5O₄ by Co₃O₄ surface coating[J]. Journal of Alloys and Compounds, 2018, 762:163-170.
[12] CHAE S, SOON J, JEONG H, et al. Passivating film artificially built on LiNi_0.5Mn_1.5O₄ by molecular layer deposition of (pentafluorophenylpropyl)trimethoxysilane[J]. Journal of Power Sources, 2018, 392:159-167.
[13] XIANG K, YANG K Q, CARTER W C, et al. Mesoscopic phase transition kinetics in secondary particles of electrode-active materials in lithium-ion batteries[J]. Chemistry of Materials, 2018, 30(13):4216-4225.
[14] FAN X L, HU E Y, JI X, et al. High energy-density and reversibility of iron fluoride cathode enabled via an intercalation-extrusion reaction[J]. Nature Communications, 2018, 9:doi:https://doi.org/10.1038/s41467-018-04476-2.
[15] GAO P, CHEN Z, ZHAO-KARGER Z, et al. A porphyrin complex as a self-conditioned electrode material for high-performance energy storage[J]. Angewandte Chemie-International Edition, 2017, 56(35):10341-10346.
[16] GORDON D, HUANG Q, MAGASINSKI A, et al. Mixed metal difluorides as high capacity conversion-type cathodes:Impact of composition on stability and performance[J]. Advanced Energy Materials, 2018, 8(19):doi:10.1002/aemn.201800213.
[17] MENG Z, TIAN H J, ZHANG S L, et al. Polyiodide-shuttle restricting polymer cathode for rechargeable lithium/iodine battery with ultralong cycle life[J]. ACS Applied Materials & Interfaces, 2018, 10(21):17933-17941.
[18] BHARGAV A, BELL M E, KARTY J, et al. A class of organopolysulfides as liquid cathode materials for high energy-density lithium batteries[J]. ACS Applied Materials & Interfaces, 2018, 10(25):21084-21090.
[19] CAI F S, DUAN Y Q, YUAN Z H. Iodine/beta-cyclodextrin composite cathode for rechargeable lithium-iodine batteries[J]. Journal of Materials Science-Materials in Electronics, 2018, 29(13):11540-11545.
[20] XU Q, SUN J K, YU Z L, et al. SiO_x Encapsulated in graphene bubble film:An ultrastable Li-ion battery anode[J]. Advanced Materials, 2018, 30(25):doi:10.1002/adma.201707430.
[21] HAN B, YANG Y, SHI X B, et al. Spontaneous repairing liquid metal/Si nanocomposite as a smart conductive-additive-free anode for lithium-ion battery[J]. Nano Energy, 2018, 50:359-366.
[22] HATCHARD T D, FIELDEN R A, OBROVAC M N. Sintered polymeric binders for Li-ion battery alloy anodes[J]. Canadian Journal of Chemistry, 2018, 96(7):765-770.
[23] HE T, FENG J R, ZHANG Y, et al. Stress-relieved nanowires by silicon substitution for high-capacity and stable lithium storage[J]. Advanced Energy Materials, 2018, 8(14):doi:10.1002/aemn.201702805.
[24] KIM S, JEONG Y K, WANG Y, et al. A "Sticky" mucin-inspired DNA-polysaccharide binder for silicon and silicon-graphite blended anodes in lithium-ion batteries[J]. Advanced Materials, 2018, 30(26):doi:10.1002/adma.201707594.
[25] KIM S H, LEE D H, PARK C, et al. Nanocrystalline silicon embedded in an alloy matrix as an anode material for high energy density lithium-ion batteries[J]. Journal of Power Sources, 2018, 395:328-335.
[26] LIU J J, YANG Y, LYU P B, et al. Few-layer silicene nanosheets with superior lithium-storage properties[J]. Advanced Materials, 2018, 30(26):doi:10.1002/adma.201800838.
[27] BERTOLINI S, BALBUENA P B. Buildup of the solid electrolyte interphase on lithium-metal anodes:Reactive molecular dynamics study[J]. Journal of Physical Chemistry C, 2018, 122(20):10783-10791.
[28] SHI Q W, ZHONG Y R, WU M, et al. High-capacity rechargeable batteries based on deeply cyclable lithium metal anodes[J]. Proceedings of the National Academy of Sciences of the United States of America, 2018, 115(22):5676-5680.
[29] DENG W, ZHOU X F, FANG Q L, et al. Microscale lithium metal stored inside cellular graphene scaffold toward advanced metallic lithium anodes[J]. Advanced Energy Materials, 2018, 8(12):doi:10.1002/aemn.201703152.
[30] ZOLLER F, PETERS K, ZEHETMAIER P M, et al. Making ultrafast high-capacity anodes for lithium-ion batteries via antimony doping of nanosized tin oxide/graphene composites[J]. Advanced Functional Materials, 2018, 28(23):doi:10.1002/adfm.201706529.
[31] HAN F D, YUE J, ZHU X Y, et al. Suppressing Li dendrite formation in Li₂S-P₂S₅ solid electrolyte by LiI incorporation[J]. Advanced Energy Materials, 2018, 8(18):doi:10.1002/aenm.201703644.
[32] DENG W, ZHU W H, ZHOU X F, et al. Highly reversible Li plating confined in three-dimensional interconnected microchannels toward high-rate and stable metallic lithium anodes[J]. ACS Applied Materials & Interfaces, 2018, 10(24):20387-20395.
[33] XU S M, MCOWEN D W, WANG C W, et al. Three-dimensional, solid-state mixed electron-ion conductive framework for lithium metal anode[J]. Nano Letters, 2018, 18(6):3926-3933.
[34] ZHAO H, LEI D N, HE Y B, et al. Compact 3D copper with uniform porous structure derived by electrochemical dealloying as dendrite-free lithium metal anode current collector[J]. Advanced Energy Materials, 2018, 8(19):doi:10.1002/aemn.201800266.
[35] BAI M H, XIE K Y, YUAN K, et al. A scalable approach to dendrite-free lithium anodes via spontaneous reduction of spray-coated graphene oxide layers[J]. Advanced Materials, 2018, 30(29):doi:10.1002/adma.201801213.
[36] CHOUDHURY S, VU D, WARREN A, et al. Confining electrodeposition of metals in structured electrolytes[J]. Proceedings of the National Academy of Sciences of the United States of America, 2018, 115(26):6620-6625.
[37] WEN K H, WANG Y L, CHEN S M, et al. Solid-liquid electrolyte as a nanoion modulator for dendrite-free lithium anodes[J]. ACS Applied Materials & Interfaces, 2018, 10(24):20412-20421.
[38] ZHANG Y, WANG C W, PASTEL G, et al. 3D wettable framework for dendrite-free alkali metal anodes[J]. Advanced Energy Materials, 2018, 8(18):doi:10.1002/aemn.201800635.
[39] LI Y T, CHEN X, DOLOCAN A, et al. Garnet electrolyte with an ultralow interfacial resistance for Li-metal batteries[J]. Journal of the American Chemical Society, 2018, 140(20):6448-6455.
[40] DONG T T, ZHANG J J, XU G J, et al. A multifunctional polymer electrolyte enables ultra-long cycle-life in a high-voltage lithium metal battery[J]. Energy & Environmental Science, 2018, 11(5):1197-1203.
[41] YOON K, KIM J J, SEONG W M, et al. Investigation on the interface between Li₁₀GeP₂S₁₂ electrolyte and carbon conductive agents in all-solid-state lithium battery[J]. Scientific Reports, 2018, 8:doi:10.1038/S41598-018-26101-4.
[42] GARBAYO I, STRUZIK M, BOWMAN W J, et al. Glass-type polyamorphism in Li-garnet thin film solid state battery conductors[J]. Advanced Energy Materials, 2018, 8(12):doi:10.1002/aemn.201702265.
[43] SHAO Y J, WANG H C, GONG Z L, et al. Drawing a soft interface:An effective interfacial modification strategy for garnet type solid-state Li batteries[J]. ACS Energy Letters, 2018, 3(6):1212-1218.
[44] HAO S M, ZHANG H, YAO W, et al. Solid-state lithium battery chemistries achieving high cycle performance at room temperature by a new garnet-based composite electrolyte[J]. Journal of Power Sources, 2018, 393:128-134.
[45] NOH S, NICHOLS W T, CHO M, et al. Importance of mixing protocol for enhanced performance of composite cathodes in all-solid-state batteries using sulfide solid electrolyte[J]. Journal of Electroceramics, 2018, 40(4):293-299.
[46] LI Y T, XU H H, CHIEN P H, et al. A perovskite electrolyte that is stable in moist air for lithium-ion batteries[J]. Angewandte Chemie-International Edition, 2018, 57(28):8587-8591.
[47] HE M H, CUI Z H, CHEN C, et al. Formation of self-limited, stable and conductive interfaces between garnet electrolytes and lithium anodes for reversible lithium cycling in solid-state batteries[J]. Journal of Materials Chemistry A, 2018, 6(24):11463-11470.
[48] KATAOKA K, NAGATA H, AKIMOTO J. Lithium-ion conducting oxide single crystal as solid electrolyte for advanced lithium battery application[J]. Scientific Reports, 2018, 8:doi:10.1038/s41598-018-2785-x.
[49] LIU Y J, LI C, LI B J, et al. Germanium thin film protected lithium aluminum germanium phosphate for solid-state Li batteries[J]. Advanced Energy Materials, 2018, 8(16):doi:10.1002/aemn.201702374.
[50] CULVER S P, KOERVER R, KRAUSKOPF T, et al. Designing ionic conductors:The interplay between structural phenomena and interfaces in thiophosphate-based solid-state batteries[J]. Chemistry of Materials, 2018, 30(13):4179-4192.
[51] MEESALA Y, CHEN C Y, JENA A, et al. All-solid-state Li-ion battery using Li_1.5Al_0.5Ge_1.5(PO₄)₃ as electrolyte without polymer interfacial adhesion[J]. Journal of Physical Chemistry C, 2018, 122(26):14383-14389.
[52] WANG C W, ZHANG L, XIE H, et al. Mixed ionic-electronic conductor enabled effective cathode-electrolyte interface in all solid state batteries[J]. Nano Energy, 2018, 50:393-400.
[53] WEI Z Y, CHEN S J, WANG J Y, et al. A large-size, bipolar-stacked and high-safety solid-state lithium battery with integrated electrolyte and cathode[J]. Journal of Power Sources, 2018, 394:57-66.
[54] ALVARADO J, SCHROEDER M A, ZHANG M H, et al. A carbonate-free, sulfone-based electrolyte for high-voltage Li-ion batteries[J]. Materials Today, 2018, 21(4):341-353.
[55] CHANG Z H, WANG J T, WU Z H, et al. The electrochemical performance of silicon nanoparticles in concentrated electrolyte[J]. ChemSusChem, 2018, 11(11):1787-1796.
[56] HAN J G, BIN LEE J, CHA A, et al. Unsymmetrical fluorinated malonatoborate as an amphoteric additive for high-energy-density lithium-ion batteries[J]. Energy & Environmental Science, 2018, 11(6):1552-1562.
[57] PARK S J, HWANG J Y, YOON C S, et al. Stabilization of lithium-metal batteries based on the in situ formation of a stable solid electrolyte interphase layer[J]. ACS Applied Materials & Interfaces, 2018, 10(21):17985-17993.
[58] LIAO B, HU X L, XU M Q, et al. Constructing unique cathode interface by manipulating functional groups of electrolyte additive for graphite/LiNi_0.6Co_0.2Mn_0.2O₂ cells at high voltage[J]. Journal of Physical Chemistry Letters, 2018, 9(12):3434-3445.
[59] ZHANG T, PORCHER W, PAILLARD E. Towards practical sulfolane based electrolytes:Choice of Li salt for graphite electrode operation[J]. Journal of Power Sources, 2018, 395:212-220.
[60] ZHAO W G, ZHENG J M, ZOU L F, et al. High voltage operation of Ni-rich NMC cathodes enabled by stable electrode/electrolyte interphases[J]. Advanced Energy Materials, 2018, 8(19):doi:10.1002/aemn.201800297.
[61] GOCKELN M, GLENNEBERG J, BUSSE M, et al. Flame aerosol deposited Li₄Ti₅O₁₂ layers for flexible, thin film all-solid-state Li-ion batteries[J]. Nano Energy, 2018, 49:564-573.
[62] IRIYAMA Y, WADAGUCHI M, YOSHIDA K, et al. 5 V-class bulk-type all-solid-state rechargeable lithium batteries with electrode-solid electrolyte composite electrodes prepared by aerosol deposition[J]. Journal of Power Sources, 2018, 385:55-61.
[63] ZHOU X Y, CHEN S, ZHOU H C, et al. Enhanced lithium ion battery performance of nano/micro-size Si via combination of metal-assisted chemical etching method and ball-milling[J]. Microporous and Mesoporous Materials, 2018, 268:9-15.
[64] BALOGUN M S, YANG H, LUO Y, et al. Achieving high gravimetric energy density for flexible lithium-ion batteries facilitated by core-double-shell electrodes[J]. Energy & Environmental Science, 2018, 11(7):1859-1869.
[65] LUO C, JI X, CHEN J, et al. Solid-state electrolyte anchored with a carboxylated azo compound for all-solid-state lithium batteries[J]. Angewandte Chemie-International Edition, 2018, 57(28):8567-8571.
[66] WU B B, WANG S Y, LOCHALA J, et al. The role of the solid electrolyte interphase layer in preventing Li dendrite growth in solid-state batteries[J]. Energy & Environmental Science, 2018, 11(7):1803-1810.
[67] LIN X D, YUAN R M, CAI S R, et al. An open-structured matrix as oxygen cathode with high catalytic activity and large Li₂O₂ accommodations for lithium-oxygen batteries[J]. Advanced Energy Materials, 2018, 8(18):doi:10.1002/aemn.201800089.
[68] LIANG S, XIA Y, LIANG C, et al. A green and facile strategy for the low-temperature and rapid synthesis of Li₂S@PC-CNT cathodes with high Li₂S content for advanced Li-S batteries[J]. Journal of Materials Chemistry A, 2018, 6(21):9906-9914.
[69] ZHAN Y J, YU H L, BEN L B, et al. Application of Li₂S to compensate for loss of active lithium in a Si-C anode[J]. Journal of Materials Chemistry A, 2018, 6(15):6206-6211.
[70] ZUBAIR U, AMICI J, FRANCIA C, et al. Polysulfide binding to several nanoscale magneli phases synthesized in carbon for long-life lithium-sulfur battery cathodes[J]. ChemSusChem, 2018, 11(11):1838-1848.
[71] LIU X C, YANG Y, WU J J, et al. Dynamic hosts for high-performance Li-S batteries studied by cryogenic transmission electron microscopy and in situ X-ray diffraction[J]. ACS Energy Letters, 2018, 3(6):1325-1330.
[72] ZHENG J, FAN X L, JI G B, et al. Manipulating electrolyte and solid electrolyte interphase to enable safe and efficient Li-S batteries[J]. Nano Energy, 2018, 50:431-440.
[73] ZHANG N, LI B, LI S M, et al. Mesoporous hybrid electrolyte for simultaneously inhibiting lithium dendrites and polysulfide shuttle in Li-S batteries[J]. Advanced Energy Materials, 2018, 8(16):doi:10.1002/aemn.201703124.
[74] ELANGO R, DEMORTIERE A, DE ANDRADE V, et al. Thick binder-free electrodes for Li-ion battery fabricated using templating approach and spark plasma sintering reveals high areal capacity[J]. Advanced Energy Materials, 2018, 8(15):doi:10.1002/aenm.201703031.
[75] BARENO J, RAGO N D, DOGAN F, et al. Effect of overcharge on Li(Ni_0.5Mn_0.3Co_0.2)O-2/graphite lithium ion cells with poly(vinylidene fluoride) binder. Ⅲ-Chemical changes in the cathode[J]. Journal of Power Sources, 2018, 385:165-171.
[76] GIEL H, HENRIQUES D, BOURNE G, et al. Investigation of the heat generation of a commercial 2032(LiCoO₂) coin cell with a novel differential scanning battery calorimeter[J]. Journal of Power Sources, 2018, 390:116-126.
[77] ZHANG W B, RICHTER F H, CULVER S P, et al. Degradation mechanisms at the Li₁₀GeP₂S₁₂/LiCoO₂ cathode interface in an all-solid-state lithium-ion battery[J]. ACS Applied Materials & Interfaces, 2018, 10(26):22226-22236.
[78] HISCHIER R, KWON N H, BROG J P, et al. Early-stage sustainability evaluation of nanoscale cathode materials for lithium ion batteries[J]. ChemSusChem, 2018, 11(13):2068-2076.
[79] KAFLE J, HARRIS J, CHANG J, et al. Development of wide temperature electrolyte for graphite/LiNiMnCoO₂ Li-ion cells:High throughput screening[J]. Journal of Power Sources, 2018, 392:60-68.
[80] AKTEKIN B, LACEY M J, NORDH T, et al. Understanding the capacity loss in LiNi_0.5Mn_1.5O₄-Li₄Ti₅O₁₂ lithium-ion cells at ambient and elevated temperatures[J]. Journal of Physical Chemistry C, 2018, 122(21):11234-11248.
[81] HONG M S, YANG C Z, WONG R A, et al. Determining the facile routes for oxygen evolution reaction by in situ probing of Li-O₂ cells with conformal Li₂O₂ films[J]. Joural of the American Chemical Society, 2018, 140(20):6190-6193.
[82] JUNG E Y, PARK C S, LEE J C, et al. Influences of graphite electrode on degradation induced by accelerated charging-discharging cycling in lithium-ion battery[J]. Molecular Crystals and Liquid Crystals, 2018, 663(1):90-98.
[83] CONNELL J G, ZHU Y S, ZAPOL P, et al. Crystal orientation-dependent reactivity of oxide surfaces in contact with lithium metal[J]. ACS Applied Materials & Interfaces, 2018, 10(20):17471-17479.
[84] LANG S Y, XIAO R J, GU L, et al. Interfacial mechanism in lithium-sulfur batteries:How salts mediate the structure evolution and dynamics[J]. Journal of the American Chemical Society, 2018, 140(26):8147-8155.
[85] BAE Y, KO D H, LEE S, et al. Enhanced stability of coated carbon electrode for Li-O-2 batteries and its limitations[J]. Advanced Energy Materials, 2018, 8(16):doi:10.1002/aenm.201702661.
[86] JONES J P, JONES S C, KRAUSE F C, et al. In situ polysulfide detection in lithium sulfur cells[J]. Journal of Physical Chemistry Letters, 2018, 9(13):3751-3755.
[87] ILOTT A J, JERSCHOW A. Probing solid-electrolyte interphase(SEI) growth and ion permeability at undriven electrolyte-metal interfaces using Li-7 NMR[J]. Journal of Physical Chemistry C, 2018, 122(24):12598-12604.
[88] HAYAMIZU K, SEKI S, HAISHI T. Non-uniform lithium-ion migration on micrometre scale for garnet-and NASICON-type solid electrolytes studied by Li-7 PGSE-NMR diffusion spectroscopy[J]. Physical Chemistry Chemical Physics, 2018, 20(26):17615-17623.
[89] NGUYEN V S, MAI V H, SENZIER P A, et al. Direct evidence of lithium ion migration in resistive switching of lithium cobalt oxide nanobatteries[J]. Small, 2018, 14(24):doi:10.1002/smll.201801038.
[90] WOOD K N, STEIRER K X, HAFNER S E, et al. Operando X-ray photoelectron spectroscopy of solid electrolyte interphase formation and evolution in Li₂S-P₂S₅ solid-state electrolytes[J]. Nature Communications, 2018, 9:doi:10.1038/s41467-018-04762-82490.
[91] HABTE B T, JIANG F M. Microstructure reconstruction and impedance spectroscopy study of LiCoO₂, LiMn₂O₄ and LiFePO₄ Li-ion battery cathodes[J]. Microporous and Mesoporous Materials, 2018, 268:69-76.
[92] KLEINER K, STREHLE B, BAKER A R, et al. Origin of high capacity and poor cycling stability of Li-rich layered oxides:A long-duration in situ synchrotron powder diffraction study[J]. Chemistry of Materials, 2018, 30(11):3656-3667.
[93] FINSTERBUSCH M, DANNER T, TSAI C L, et al. High capacity garnet-based all-solid-state lithium batteries:Fabrication and 3D-microstructure resolved modeling[J]. ACS Applied Materials & Interfaces, 2018, 10(26):22329-22339.
[94] CHOI Y S, LEE J C. Phase transition behaviors and formation of electrically resistive phases at the anode:Major factors determining the energy efficiency of Li-ion batteries[J]. Journal of Materials Chemistry A, 2018, 6(24):11531-11541.
[95] BRAUN P, UHLMANN C, WEISS M, et al. Assessment of all-solid-state lithium-ion batteries[J]. Journal of Power Sources, 2018, 393:119-127.
[96] BRYDEN T S, DIMITROV B, HILTON G, et al. Methodology to determine the heat capacity of lithium-ion cells[J]. Journal of Power Sources, 2018, 395:369-378.
[97] XIAO W J, XIN C, LI S B, et al. Insight into fast Li diffusion in Li-excess spinel lithium manganese oxide[J]. Journal of Materials Chemistry A, 2018, 6(21):9893-9898.
[98] CORTES H A, VILDOSOLA V L, BARRAL M A, et al. Effect of halogen dopants on the properties of Li₂O₂:Is chloride special?[J]. Physical Chemistry Chemical Physics, 2018, 20(25):16924-16931.
[99] HANNAH D C, GAUTAM G S, CANEPA P, et al. On the balance of intercalation and conversion reactions in battery cathodes[J]. Advanced Energy Materials, 2018, 8(20):doi:10.1002/aenm.201800379.
[100] CHEN Y Y, BEN L B, CHEN B, et al. Impact of high valence state cation Ti/Ta surface doping on the stabilization of spinel LiNi_0.5Mn_1.5O₄ cathode materials:A systematic density functional theory investigation[J]. Advanced Materials Interfaces, 2018, 5(12):doi:10.1002/adml.201800077.