储能科学与技术 ›› 2020, Vol. 9 ›› Issue (4): 1066-1073.doi: 10.19799/j.cnki.2095-4239.2020.0068

• 储能材料与器件 • 上一篇    下一篇

Sm对La0.5Nd0.35-xSmxMg0.15Ni3.5合金晶体结构和储氢性能的影响

赵鑫1(), 可丹丹1(), 吉力强2, 胡锋1, 蔡颖1   

  1. 1.内蒙古科技大学材料与冶金学院,内蒙古 包头 014010
    2.安泰环境工程技术有限公司,北京 100081
  • 收稿日期:2020-02-12 修回日期:2020-02-18 出版日期:2020-07-05 发布日期:2020-06-30
  • 通讯作者: 可丹丹 E-mail:zhaoxinrare@163.com;kedandan4545@163.com
  • 作者简介:赵鑫(1984—),男,博士研究生,讲师,研究方向为储氢材料,E-mail:zhaoxinrare@163.com
  • 基金资助:
    内蒙古自然科学基金项目(2018BS05010);内蒙古自治区科技成果转化项目(CGZH2018152);内蒙古科技大学科研启动基金项目(2019QDL-B07)

Crystallographic and electrochemical hydrogen storage properties of Sm substitute Nd for La0.5Nd0.35-xSmxMg0.15Ni3.5 alloys

ZHAO"Xin1(), KE"Dandan1(), JI"Liqiang2, HU"Feng1, CAI"Ying1   

  1. 1.College of Materials and Metallurgy, Inner Mongolia University of Science and Technology, Baotou 014010, Inner Mongolia, China
    2.AT&M Environmental Engineering Technology Co. Ltd. , Beijing 100081, China
  • Received:2020-02-12 Revised:2020-02-18 Online:2020-07-05 Published:2020-06-30
  • Contact: Dandan KE E-mail:zhaoxinrare@163.com;kedandan4545@163.com

摘要:

金属Sm替代La0.5Nd0.35Mg0.15Ni3.5合金中的Nd用以提高合金性价比。通过多种研究手段分析了La0.5Nd0.35-xSmxMg0.15Ni3.5合金的相结构、合金形貌以及电化学储氢性能。所制备合金为A2B7、A5B19主相和AB5残余相组成的多相结构。随着Sm替代量增加(x值由0增加至0.3),相丰度的变化规律为主相A2B7和A5B19先升高后降低,而AB5残余相相丰度呈相反的变化趋势。合金最大放电容量由334.6 mA·h/g(x=0)升高至346.5 mA·h/g(x=0.20),当x=0.30时,最大放电容量为331.1 mA·h/g。高倍率放电性能(HRD2000)由41.4%(x=0)升高至63.8%(x=0.20),当x=0.30时,HRD2000为52.1%。100周期容量循环保持率呈单调上升趋势,由65.6%(x=0)升高至69.2%(x=0.30)。

关键词: La-Mg-Ni储氢合金, 电化学性能, 电化学动力学性能, 超晶格结构

Abstract:

The Nd in the La0.5Nd0.35Mg0.15Ni3.5 alloy has been substituted with Sm to improve the performance to price ratio. Herein, the phase structures, morphologies, and hydrogen storage properties of the La0.5Nd0.35-xSmxMg0.15Ni3.5 alloys are studied using different methods. The Rietveld analysis pattern showed that the phase composition of the alloys containing multiphase structures, including the major phases (i.e., A2B7 and A5B19) and the residual phase (i.e., AB5), remained unchanged after the partial substitution of Sm instead of Nd. Increasing the content of the substituted Sm (x=0-0.30) changes the phase abundance, causing the A2B7 and A5B19 phases to increase before decreasing, whereas the AB5 phase showed the reverse trend. The a-axis parameter, c-axis, and unit cell volume of the major phases and the residual phase gradually decreased with the increasing Sm content. Further, the electrochemical properties of the alloy electrodes were improved by substituting Nd with Sm. The maximum discharge capacity of the alloy electrodes initially increased from 334.6 mA·h/g(x=0)to 346.5 mA·h/g (x=0.20). Then, it decreased to 331.1 mA·h/g(x=0.30). The high-rate dischargeability at a discharge current density of 2000 mA/g(HRD2000)initially increased from 41.4%(x=0) to 63.8% (x=0.20). Subsequently, it decreased to 52.1% (x = 0.30). The cycling capacity retention rate at the 100th cycle monotonically increased from 65.6% (x = 0) to 69.2% (x = 0.30), which should be attributed to the improvement in corrosion resistance of the alloy electrodes during the charge-discharge cycle.

Key words: La-Mg-Ni-based alloy, electrochemical characteristics, electrochemical kinetic property, superlattice structure

中图分类号: