低熔点合金传热储热材料的研究与应用

doi:10.3969/j.issn.2095-4239.2013.03.003

摘要/Abstract

摘要： 低熔点合金具有导热系数高,储能密度大,使用温度范围广,性能稳定等特点,是一种潜在的宽温域传热工质和中低温相变储热材料.结合低熔点合金的相变温度,相变潜热,热导率及相变稳定性等热物理性能,综述了低熔点合金相变储热材料的研究进展;介绍了液态低熔点合金传热材料的蒸汽压,表面张力,黏度及比热容等性能,以及低熔点合金在高温下与容器材料的相容性;对低熔点合金传热储热材料的下一步研究进行了展望.

关键词: 低熔点合金, 传热, 储热, 腐蚀性

Abstract: Low melting point alloys are potential phase change thermal storage materials and heat transfer agent due to its excellent property such as high thermal conductivity coefficient, high thermal storage density, excellent thermal stability, low melting point and high boiling point. This paper review the phase change thermal storage low melting point alloys based on its thermo-physical properties such as phase change temperature, phase change latent, coefficient of thermal conductivity and stabilization. The steam pressure, interfacial force, viscosity and capacity of heat are introduced to explore the application of low melting point alloy in heat transfer materials. The high temperature corrosion behaviors of low melting point alloy are also introduced. And finally, the future work about the thermal storage and heat transfer low melting point alloys are prospected.

Key words: low melting point alloy, heat transfer, thermal storage, corrosion

中图分类号:

TB34

李元元, 程晓敏. 低熔点合金传热储热材料的研究与应用[J]. 储能科学与技术, 2013, 2(3): 189-198.

LI Yuanyuan, CHENG Xiaomin. Review on the low melting point alloys for thermal energy storage and heat transfer applications[J]. Energy Storage Science and Technology, 2013, 2(3): 189-198.

参考文献

[1] Reilly J,Paltsev S,Felzer B,Wang X,Kicklighter D,Melillo J,Prinn R,Sarofim M,Sokolov A,Wang C. Global economic effects of changes in crops, pasture, and forests due to changing climate, carbon dioxide, and ozone[J]. Energy Policy ,2006,35(11):5370-5383.
[2] Qian Bozhang(钱伯章). 节能减排可持续发展的必由之路 [M]. Beijing:Science Press,2008.
[3] Zhang Zhengmin(张正敏),Wang Gehua(王革华),Gao Hu(高虎). 中国可再生能源发展战略与政策研究[J]. Review of Economic Research (经济研究参考),2004(84): 26-32.
[4] Pecheco J E,Gilbert R. Overview of recent results of the solar two test and evaluations program, renewable and advanced energy systems for the 21st century[C]// Proc. Of 1999 ASME Int. Solar Energy Conf.,Maui,HI,1999.
[5] Carlos M S. An overview of GSP in Europe[C]// North Africa and the Middle. Madrid:CSP and CPV Finance and Investment Summit,2008.
[6] Hadjieva M,Bozukov M,Tsacheva T. Next generation of phase change material composites for increased energy efficiency in steam commercial plants[C]// The Fourth International Green Energy Conference,Beijing,2008.
[7] Liang Hong(梁红). Evalution of thermal stability for heat transfer fluids[J]. Petroleum Processing and Petrochemicals (石油炼制与化工),2002,33(5):53-56.
[8] Herrmann U,Kelly B,Price H. Two-tank molten salt storage for parabolic trough solar power plants[J]. Energy ,2004,29:883-893.
[9] Takahashi Y,Sakamoto R,Kamimoto M. Heat capacities and latent heats of LiNO 3 , NaNO 3 and KNO 3 [J]. International Journal of Thermophysics ,1988,9(6):1081-1090.
[10] Tufen R,Petitet J P,Denielou I,Neindre L B. Experimental determination of the thermal conductivity of molten pure salts and salt mixtures[J]. Int. J. Thermophys ,1985,6(4):315-330.
[11] Heidenreich G R,Parekh M B．Thermal energy storage for organic Rankine cycle solar dynamic space power systems[C]// Proceedings of 21st Intersociety Energy Conversion Engineering Conference 2,1986,791-797.
[12] Venkatesetty H V,LeFrois R T. Thermal energy storage for solar power plants[C]//Proceedings of 11th Intersociety Energy Conversion Engineering Conference,1976:606-612.
[13] Pincemin S,Olives R,Py X,Christ M. Highly conductive composites made of phase change materials and graphite for thermal storage[J]. Solar Energy Materials and Solar Cells ,2008,92(6):603-613.
[14] Zoubir A,Jerome L,Elena P D. KNO 3 /NaNO 3 -Graphite materials for thermal energy storage at high temperature:Part I Elaboration methods and thermal properties[J]. Applied Thermal Engineering ,2010,30(13):1580-1585.
[15] Jerome L,Zoubir A,Elena P D. KNO 3 /NaNO 3 -Graphite materials for thermal energy storage at high temperature:Part II Phase transition properties[J]. Applied Thermal Engineering ,2010,30(13):1586-1593.
[16] Zhang Jianzhong(张建忠). 采用新的热载体勇闯节能新途径[J]. Quality for Chemical Industry (化工质量),2000(3):15-17.
[17] Wu Xizhe(武希哲),Li Yunkang(李运康). 低熔点合金[J]. Rare Metal Materials and Engineering (稀有金属材料与工程),1984,1:53-56.
[18] Zhao Tianchan(赵天婵),Ouyang Zhong(欧阳忠). 低熔点合金的成分及其熔点[J]. Machinery Manufacturing Engineer (机械工艺师),1996,8:21-22.
[19] Gasanaliev A M,Gamataeva B Y. Heat-accumulating properties of melts[J]. Russian Chemical Reviews ,2000,69(2):179-186.
[20] Voronina T B,Gudkov V I,Shimanskii O V. Energy storage and ways of increasing the efficiency of operation of power plants and economy of energy[R]. Moscow:Khimiya,1986.
[21] Chen S W,Wang C H,Lin S K, et al . Thermal and Mechanical properties of Sn-Pb solder alloys[J]. J.Mater. Sci. : Mater. Electron ,2007,18:19-37.
[22] Qiao Zhiyu(乔治郁),Xie Yunan(谢允安),He Mingming(何鸣鸿),Zhang Qiyun(张启运). 无铅焊料研究进展和若干前沿问题[J]. Chinese Journal of Rare Metals (稀有金属),1996,2:139-143.
[23] Wang Yang(王阳),Hu Wangyu(胡望宇). Research progress on Sn-Bi-based low-temperature Pb-free solder alloys[J]. Materials Review (材料导报),1999,13:23-26.
[24] Wang Huanrong(王焕荣),Ye Yifu(叶以富),Min Guanghui(闵光辉),Teng Xinying(滕新营),Shi Zhiqiang(石志强),Qin Jingyu(秦敬玉). Study on liquid structure and viscosity of eutectic gallium-indium alloy[J]. Acta Metallrugica Sinica (金属学报),2001,37:801-804.
[25] Abtew M,Selvaduray G. Lead-free solders in microelectronics[J]. Materials Science and Engineering ,2000,27:95-141.
[26] Aeda M,Toshio A U. Low-melting point alloy for fusible plug[R]. Japan,2001.
[27] El-Daly A A,Swilem Y,Makled M H,El-Shaarawy M G,Abdraboh A M. Thermal and mechanical properties of Sn-Zn-Bi lead-free solder alloys[J]. Journal of Alloys and Compounds ,2009,484(1-2):134-142.
[28] Kabassis H,Rutter J W,Winegard W C. Microstructure of one of the ternary eutectic alloys in the Bi-In-Sn system[J]. Metall. Trans. A ,1984,15(8):1515-1517.
[29] Smither R K. Liquid metal cooling of synchrotron optics[J]. SPIE High Heat Flux Engineering ,1992,1739:116-134.
[30] Yu Tieming(俞铁铭). Research on the heat storage properties of Sn-Bi-Zn-Cu-Pb alloys as phase change materials in medium temperature[D]. Wuhan:Wuhan University of Technology,2012.
[31] Li Yuanyuan(李元元),Cheng Xiaomin(程晓敏),Yu Tieming(俞铁铭). Thermal cycling stability of Sn-Zn phase change heat storage alloy[J]. Special Casting & Nonferrous Alloys (特种铸造及有色合金),2012,7:674-676.
[32] Shimoji M. Liquid Metals[M]. New York:Academic Press,1977.
[33] Ma Kunquan(马坤全). Study on liquid metal cooling method for thermal management of computer chip[D]. Beijing:Chinese Academy of Science,2008.
[34] Prokhorenko V Y,Borisjuk A K,Yamkovy V N. Temperature-time dependence of the parameters of magnetized suspension on the basis of metallic liquid alloys[C]// Riga:Proc. 5th Int. Conf. on Magnetic Fluids,1989.
[35] Prokhorenko V Ya,Borisjuk A K,Pokrasin M A,Prokhorenko S V,Kotov V V. Liquid gallium:Potential uses as a heat-transfer agent[J]. High Temperature ,2000,38(6):954-968.
[36] Chen Deming(陈德明),Shu Jie(舒杰),Li Jianhong(李戬洪),Xu Gang(徐刚). Analysis on heat transfer characteristic of lead-bismuth eutectic alloy applied in solar thermal power generation[J]. Journal of Power Engineering (动力工程),2008,28(5):812-815.
[37] Qian Zengyuan(钱增源). 低熔点金属的热物性[M]. Beijing:Science Press,1985.
[38] Sato K,Furutani A,Saito M,Isozaki M,Suganuma K,Imahori S. Melting attack of solid plates by a high-temperature liquid jet [II] Erosion behavior by a molten metal jet[J]. Nuclear Engineering and Design ,1991,132(2):171-186.
[39] Yang W S. Blanket design studies for maximizing the discharge burnup of liquid metal cooled ATW systems[J]. Annals of Nuclear Energy ,2002,29:509-523.
[40] Smither R K,Forster G A,Kot C A,Kuzay T M. Liquid gallium metal cooling for optical elements with high heat loads[J]. Nuclear Instrument Methods in Physics Research A ,1988,266(1-3):517-524.
[41] Men Yubin(门玉宾),Ma Junjun(马军军),Wang Shufu(王书福), Peng Wengen(彭稳根),Liu Yuanchun(刘元春),He Yurong(何玉荣). Numerical investigation on the natural convection of liquid gallium[J]. Journal of Harbin Institute of Technology (哈尔滨工业大学学报),2011,1:114-118.
[42] Ma K Q,Liu J. Heat driven liquid metal cooling device for the thermal management of computer chip[J]. Journal of Physics D : Applied Physics ,2007,40(15):4722-4729.
[43] Ma K Q,Liu J. Liquid metal cooling in thermal management of computer chip[J]. Frontiers of Energy and Power Engineering in China ,2007,1(4):384-402.
[44] Baldin Yu F,Markov V G. Structural Materials for Facilities with Liquid-metal Heat-transfer Agents[M]. Leningrad:Sudpromgiz,1961.
[45] Borishanskii M V,Kutateladze S S,Novikow I I, et al . Liquid Metal Heat Transfer Agents[M]. Moscow:Atomizdat,1976.
[46] Yatsenko S P,Danilin V N. The Physicochemical Properties of Gallium Based Alloys[M]. Moscow:Nauka,1974.
[47] Cathcart J V,Manly W D. The mass transfer properties of various metals and alloys in liquid lead[J]. Corrosion ,1956(12):43-47.
[48] Manly W D. Fundamentals of liquid metal corrosion[J]. Corrosion ,1956,12:46-52.
[49] Shimotake H,Hesson J C. Corrosion by fused salts and heavy liquid metals A survey[J]. Advances in Chemistry Series ,1967,64:149-185.
[50] Park J J,Butt D P,Beard C A. Review of liquid metal corrosion issues for potential containment materials for liquid lead and lead-bismuth eutectic spallation targets as a neutron source[J]. Nuclear Engineering and Design ,2000,196:315-325.
[51] Sannier J,Santarini G. Corrosion two ferritic steels by liquid lead circulated in a thermosypon, finding of model[J]. Journal of Nuclear Materials ,1982,107:196-217.
[52] Asher R C,Davies D,Beetham S A. Some observations on the compatibility of structural materials with molten lead[J]. Corrosion Science ,1977,17:545-557.
[53] James J A,Trotman J. Corrosion of steels in liquid bismuth and lead[J]. Journal of the Iron and Steel Institute ,1960,3:319-323.
[54] Wilson G W. Study of compatibility of some creep resistant steels with liquid bismuth in non isothermal systems[J]. Journal of the Iron and Steel Institute ,1958,190:271-276.
[55] Horsley G W,Maskrey J T. The corrosion of 2.25Cr-1Mo steel by liquid bismuth[J]. Journal of the Iron and Steel Institute ,1958,189:139-148.
[56] Dawe D W,Parry G W,Wilson G W. Study of compatibility of some creep resistant steels with liquid bismuth in non-isothermal systems[J]. Journal of British Nuclear Energy Conference ,1960,5:24-29.
[57] Cygan R. Circulation of lead-bismuth eutectic at intermediate temperatures[R]. North American Aviation Report,NAA-SR-253,1953.
[58] Cygan R. Lead-bismuth eutectic at intermediate temperatures[R]. North American Aviation Report,NAA-SR-1060,1954.
[59] Romano A J,Klumet C J,Gurinsky D H. The investigation of container materials for Bi and Pb alloys[R]. Brookhaven National Laboratory Report,1963.
[60] Ilincev G. Research results on the corrosion effects of liquid heavy metals Pb, Bi and Pb-Bi on structural materials with and without corrosion inhibitor[J]. Nuclear Engineering and Design ,2002,217:167-177.
[61] Fazio C,Benamati G,Martini C,Palombarini G. Compatibility tests on steels in molten lead and lead-bismuth[J]. Journal of Nuclear Materials ,2001,296(1-3):243-248.
[62] Muller G,Schumacher G,Zimmermann F. Investigation on oxygen controlled liquid lead corrosion of surface treated steels[J]. Journal of Nuclear Materials ,2000,278(1):85-95.
[63] Benamati G,Buttol P,Imbeni V,Martin C,Palombarini G. Behavior of materials for accelerator driven systems in stagnant molten lead[J]. Journal of Nuclear Materials ,2000,279(2-3):308-316.
[64] Eliseeva O I,Tsisar V P,Fedirko V M,Matychak Y S. Changes in the phase composition of an oxide film on EP823 steel in contact with stagnant lead melt[J]. Materials Science ,2004,40(2):260-269.
[65] Tsisar V P,Eliseeva O I,Fedirko V M,Lopushans'kyi V A. Corrosion behavior of α-Fe and 20Kh13 steel in contact with oxygen-containing lead melts[J]. Materials Science ,2003,39(4):539-544.
[66] Eliseeva O I,Tsisar V P. Corrosion of 20Kh13 steel in lead melts saturated with oxygen[J]. Materials Science ,2005,41(5):603-608.
[67] Fedirko V M,Eliseeva O I,Kalyandruk V I,Lopushans'kyi V A. Effects of admixtures of oxygen on the oxidation of iron and Fe-Cr alloys in lead melts[J]. Materials Science ,1997,33(3):358-363.
[68] Fedirko V M,Eliseeva O I,Kalyandruk V I,Lopushans'kyi V A. Corrosion of Armco iron and model Fe-Cr-Al alloys in oxygen-containing lead melts[J]. Materials Science ,1997,33(2):207-211.
[69] Furukawa T,Muller G,Schumacher G,Weisenburger A,Heinzel A,Aoto K. Effect of oxygen concentration and temperature on compatibility of ODS steel with liquid, stagnant Pb 45 Bi 55 [J]. Journal of Nuclear Materials ,2004,335(2):189-193.
[70] Barbier F,Benamati G,Fazio C,Rusanov A. Compatibility tests of steels in flowing liquid lead-bismuth[J]. Journal of Nuclear Materials ,2001,295(2-3):149-156.
[71] Zhang J,Li N,Chen Y T,Rusanov A E. Corrosion behaviors of US steels in flowing lead-bismuth eutectic (LBE)[J]. Journal of Nuclear Materials ,2005,336(1):1-10.
[72] Muller G,Heinzel A,Konys J,Schumacher G,Weisenburger A,Zimmermann F,Engelko V,Rusanov A,Markov V. Results of steel corrosion tests in flowing liquid Pb/Bi at 420-600 ℃ after 2000 h[J]. Journal of Nuclear Materials ,2002,301(1):40-46.
[73] Muller G,Heinzel A,Konys J,Schumacher G,Weisenburger A,Zimmermann F,Engelko V,Rusanov A,Markov V. Behavior of steels in flowing liquid PbBi eutectic alloy at 420-600 ℃ after 4000-7200 h[J]. Journal of Nuclear Materials ,2004,335(2):163-168.
[74] Barbier F,Rusanov A. Corrosion behavior of steels in flowing lead-bismuth[J]. Journal of Nuclear Materials ,2001,296(1-3):231-236.
[75] Kondo M,Takahashi M,Sawada N,Hata K. Corrosion of steels in lead-bismuth flow[J]. Journal of Nuclear Science and Technology ,2006,43(2):107-116.
[76] Briceno D G,Munoz M F J,Crespo L S,Esteban F,Torres C. Behavior of F82H mod. stainless steel in lead-bismuth and temperature gradient[J]. Journal of Nuclear Materials ,2001,296(1-3):265-272.
[77] Zhang J S. A review of steel corrosion by liquid lead and lead-bismuth[J]. Corrosion Science ,2009,51(6):1207-1227.