基于仿生翅脉流道冷板的锂离子电池组液冷散热

doi:10.19799/j.cnki.2095-4239.2021.0670

摘要/Abstract

摘要：

基于方形锂离子电池生热特点，设计了一款新型仿生翅脉流道冷板。在数值传热学理论基础上，建立了仿生翅脉流道冷板的电池组液冷冷却散热模型，对仿生翅脉流道冷板和进出口位置不同的两种并行流道冷板的锂离子电池组冷却散热分别进行了数值模拟计算，并分析了电池组相邻冷板冷却液流向和流道槽深等参数对仿生翅脉流道冷板散热的影响。结果表明：与并行流道冷板相比，仿生翅脉流道冷板冷却不仅能够进一步降低电池组最高温度和温差，提升温度分布均匀性，还可以减小流道压力损失，降低能量消耗。电池组相邻冷板冷却液交错流比同向流电池组的表面最高温度降低了0.62 K，温差减小了1.13 K，平均温度变化相差不大，温度场分布均匀性得到进一步提升；冷却液质量流量不变，随着流道槽深的增大，电池组的最高温度、平均温度和温差均出现先增大后减小的现象，但随着流道槽深的增加，电池组的重量和所占空间也会增加，当流道槽深为2 mm时冷板冷却效果最优。研究结果可为探索散热性能更好、能耗更低的电池组热管理系统提供参考。

关键词: 锂离子电池, 仿生翅脉流道, 冷板, 电池热管理

Abstract:

Based on the heat production characteristics of square lithium-ion batteries, a sort of bionic wing vein channel cool plate was developed. Based on numerical heat transfer theory, a liquid-cooled heat dissipation model of the battery pack is developed for the cold plate of the bionic wings vein channel, and the numerical simulation calculations were performed on the lithium-ion battery packs of the two parallel flow channel cold plates with various inlet and outlet positions and the bionic wings vein channel cold plate. The impact of the neighboring cold plates of the battery pack's cooling liquid flow direction and channel depth on the heat dissipation of the bionic wings vein channel cold plate is investigated. The results demonstrate that when compared with the cold plate in the parallel channel, chilling the cold plate in the bionic wing channel may lower not only the maximum temperature and temperature difference of the battery pack but also the pressure loss of the flow channel and the energy consumption. Compared with that of the battery pack in the same direction. the maximum surface temperature of the adjacent cold plate coolant in the staggered flow of the battery pack decreases by 0.62 K and the temperature difference decreases by 1.13 K. The average temperature change is not significantly different, and the temperature field distribution homogeneity has improved. The coolant mass flow rate remains constant, while the battery pack's maximum temperature, average temperature, and temperature differential rise initially, then fall as the groove depth increases. However, as the depth of the channel increases, the weight and space occupied by the battery pack will also increase. The cooling effect of the cold plate is optimal when the channel groove depth is 2 mm. The findings might be used to investigate the thermal management of battery packs with improved heat dissipation and decreased energy usage.

Key words: lithium-ion batteries, bionic wing vein channel, cold-plate, thermal management of battery

中图分类号:

TM 911

刘显茜, 孙安梁, 田川. 基于仿生翅脉流道冷板的锂离子电池组液冷散热[J]. 储能科学与技术, 2022, 11(7): 2266-2273.

Xianxi LIU, Anliang SUN, Chuan TIAN. Research on liquid cooling and heat dissipation of lithium-ion battery pack based on bionic wings vein channel cold plate[J]. Energy Storage Science and Technology, 2022, 11(7): 2266-2273.

图/表 10

图1

图2

图3

图4

图5

图6

图7

表1

图8

图9

参考文献 21

1	FAN Y Q, BAO Y, LING C, et al. Experimental study on the thermal management performance of air cooling for high energy density cylindrical lithium-ion batteries[J]. Applied Thermal Engineering, 2019, 155: 96-109.
2	杜光超, 郑莉莉, 张志超, 等. 圆柱形高镍三元锂离子电池高温热失控实验研究[J]. 储能科学与技术, 2020, 9(1): 249-256.
	DU G C, ZHENG L L, ZHANG Z C, et al. Experimental study on high temperature thermal runaway of cylindrical high nickel ternary lithium-ion batteries[J]. Energy Storage Science and Technology, 2020, 9(1): 249-256.
3	陈俊宇, 于兰英, 王国志. 动力电池组风冷散热系统优化分析[J]. 电源技术, 2019, 43(1): 84-87.
	CHEN J Y, YU L Y, WANG G Z. Analysis of optimization of wind cooling system in power battery[J]. Chinese Journal of Power Sources, 2019, 43(1): 84-87.
4	马永笠, 徐自强, 吴孟强, 等. 电池组交替式风冷散热结构研究[J]. 电源技术, 2019, 43(11): 1810-1812, 1835.
	MA Y L, XU Z Q, WU M Q, et al. Alternate air-cooled heat dissipation system for battery[J]. Chinese Journal of Power Sources, 2019, 43(11): 1810-1812, 1835.
5	陈通, 孙国华, 王明强, 等. 基于液体的动力电池热管理系统性能研究[J]. 电源技术, 2019, 43(4): 658-661.
	CHEN T, SUN G H, WANG M Q, et al. Research on thermal management performance of electric vehicle power battery based on liquid[J]. Chinese Journal of Power Sources, 2019, 43(4): 658-661.
6	李罡, 黄向东, 符兴锋, 等. 液冷动力电池低温加热系统设计研究[J]. 湖南大学学报(自然科学版), 2017, 44(2): 26-33.
	LI G, HUANG X D, FU X F, et al. Design research on battery heating and preservation system based on liquid cooling mode[J]. Journal of Hunan University (Natural Sciences), 2017, 44(2): 26-33.
7	徐众, 侯静, 万书权, 等. 金属泡沫/石蜡复合相变材料的制备及热性能研究[J]. 储能科学与技术, 2020, 9(1): 109-116.
	XU Z, HOU J, WAN S Q, et al. Preparation and thermal properties of metal foam/paraffin composite phase change materials[J]. Energy Storage Science and Technology, 2020, 9(1): 109-116.
8	王建, 郭航, 叶芳, 等. 热管散热装置对车用锂离子电池组内温度分布影响数值模拟[J]. 化工学报, 2016, 67(S2): 340-347.
	WANG J, GUO H, YE F, et al. Numerical simulation of effect of heat pipe cooling device on temperature distribution in lithium-ion battery pack of vehicle[J]. CIESC Journal, 2016, 67(S2): 340-347.
9	MONIKA K, CHAKRABORTY C, ROY S, et al. An improved mini-channel based liquid cooling strategy of prismatic LiFePO₄ batteries for electric or hybrid vehicles[J]. Journal of Energy Storage, 2021, 35: 102301.
10	SAMEER MAHMOUD N, MOHAMMAD JAFFAL H, ABDULNABI IMRAN A. Performance evaluation of serpentine and multi-channel heat sinks based on energy and exergy analyses[J]. Applied Thermal Engineering, 2021, 186: 116475.
11	PANCHAL S, KHASOW R, DINCER I, et al. Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery[J]. Applied Thermal Engineering, 2017, 122: 80-90.
12	DENG T, RAN Y, ZHANG G D, et al. Design optimization of bifurcating mini-channels cooling plate for rectangular Li-ion battery[J]. International Journal of Heat and Mass Transfer, 2019, 139: 963-973.
13	HUANG Y Q, MEI P, LU Y J, et al. A novel approach for Lithium-ion battery thermal management with streamline shape mini channel cooling plates[J]. Applied Thermal Engineering, 2019, 157: 113623.
14	KONG W, ZHU K J, LU X P, et al. Enhancement of lithium-ion battery thermal management with the divergent-shaped channel cold plate[J]. Journal of Energy Storage, 2021, 42: 103027.
15	SHENG L, SU L, ZHANG H, et al. Numerical investigation on a lithium ion battery thermal management utilizing a serpentine-channel liquid cooling plate exchanger[J]. International Journal of Heat and Mass Transfer, 2019, 141: 658-668.
16	AMALESH T, NARASIMHAN N L. Introducing new designs of minichannel cold plates for the cooling of Lithium-ion batteries[J]. Journal of Power Sources, 2020, 479: 228775.
17	徐尚龙, 郭宗坤, 秦杰, 等. 树形微通道热沉仿生建模及三维热流特性数值分析[J]. 中国机械工程, 2014, 25(9): 1185-1188.
	XU S L, GUO Z K, QIN J, et al. Three dimensional numerical simulation of fluid flow and heat transfer in tree-shaped microchannels[J]. China Mechanical Engineering, 2014, 25(9): 1185-1188.
18	吴龙文, 卢婷, 陈加进, 等. 芯片散热微通道仿生拓扑结构研究[J]. 电子学报, 2018, 46(5): 1153-1159.
	WU L W, LU T, CHEN J J, et al. A study of bionic micro-channel topology for chip cooling[J]. Acta Electronica Sinica, 2018, 46(5): 1153-1159.
19	邓小雷, 庞世杰, 李瑞琦, 等. 基于昆虫翅脉仿生流道的数控机床主轴系统冷却结构热设计[J]. 工程设计学报, 2018, 25(5): 583-589.
	DENG X L, PANG S J, LI R Q, et al. Thermal design of cooling structure for CNC machine tool spindle system based on insect wing vein bionic channel[J]. Chinese Journal of Engineering Design, 2018, 25(5): 583-589.
20	BERNARDI D, PAWLIKOWSKI E, NEWMAN J. A general energy balance for battery systems[J]. Journal of the Electrochemical Society, 1985, 132(1): 5-12.
21	李涛. 纯电动汽车锂离子电池热效应及电池组散热结构优化[D]. 重庆: 重庆大学, 2013.
	LI T. Study on thermal effects of lithium-ion battery in electric vehicle and battery package dissipation structural optimization[D]. Chongqing: Chongqing University, 2013.

参数	同向流	交错流
最高温度/K	318.00	317.38
平均温度/K	315.72	315.70
温差/K	9.04	7.91

[1]	张玉龙, 栾伟玲, 吴森明. 基于外特性方法的锂离子电池析锂及可逆锂回嵌定量分析[J]. 储能科学与技术, 2023, 12(2): 529-535.
[2]	杨帆, 和嘉睿, 陆鸣, 陆玲霞, 于淼. 基于BP-UKF算法的锂离子电池SOC估计[J]. 储能科学与技术, 2023, 12(2): 552-559.
[3]	沈雪晴, 陈威. 内嵌树形翅片相变层电池热管理性能[J]. 储能科学与技术, 2023, 12(2): 459-467.
[4]	张慧敏, 王京, 王一博, 郑家新, 邱景义, 曹高萍, 张浩. 锂离子电池SEI多尺度建模研究展望[J]. 储能科学与技术, 2023, 12(2): 366-382.
[5]	朱文凯, 周星, 刘亚杰, 张涛, 宋元明. 基于递推门控循环单元神经网络的锂离子电池荷电状态实时估计方法[J]. 储能科学与技术, 2023, 12(2): 570-578.
[6]	王志福, 罗崴, 闫愿, 徐崧, 郝文美, 周聪林. 基于GAPSO-FNN神经网络的锂离子电池传感器故障诊断[J]. 储能科学与技术, 2023, 12(2): 602-608.
[7]	张德柳, 张言, 王海, 王佳东, 高宣雯, 刘朝孟, 杨东润, 骆文彬. 镁掺杂协同氧化铝包覆优化锂离子电池高镍正极材料[J]. 储能科学与技术, 2023, 12(2): 339-348.
[8]	王放放, 冯祥明, 赵光金, 夏大伟, 胡玉霞, 陈卫华. 电化学阻抗谱识别不同化学体系退役动力锂离子电池[J]. 储能科学与技术, 2023, 12(2): 609-614.
[9]	韩江浩, 王晓丹, 李奇松, 李慧芳, 王睿, 许刚. 锂离子电池加速循环测试研究[J]. 储能科学与技术, 2023, 12(1): 255-262.
[10]	潘岳, 韩雪冰, 欧阳明高, 任华华, 刘巍, 闫月君. 锂离子电池内短路检测算法及其在实际数据中的应用[J]. 储能科学与技术, 2023, 12(1): 198-208.
[11]	郑瀚, 来沛霈, 田晓华, 孙卓, 张哲娟. 多级碳复合的大尺寸硅颗粒在锂离子电池负极中的性能[J]. 储能科学与技术, 2023, 12(1): 23-34.
[12]	何骁龙, 石晓龙, 王子阳, 韩路豪, 姚斌. 过充、过热及其共同作用下车用三元锂离子电池热失控特性[J]. 储能科学与技术, 2023, 12(1): 218-226.
[13]	邓林旺, 冯天宇, 舒时伟, 郭彬, 张子峰. 锂离子电池无损析锂检测研究进展[J]. 储能科学与技术, 2023, 12(1): 263-277.
[14]	张群斌, 董陶, 李晶晶, 刘艳侠, 张海涛. 废旧电池电解液回收及高值化利用研发进展[J]. 储能科学与技术, 2022, 11(9): 2798-2810.
[15]	牛少军, 吴凯, 朱国斌, 王艳, 曲群婷, 郑洪河. 锂离子电池硅基负极循环过程中的膨胀应力[J]. 储能科学与技术, 2022, 11(9): 2989-2994.