钠离子电池金属氧/硫/硒化物负极材料研究进展

doi:10.19799/j.cnki.2095-4239.2020.0095

摘要/Abstract

摘要：

钠离子电池(SIBs)具有成本低廉、环境友好等优点，在下一代低速电动汽车电源和大规模储能系统中拥有巨大的应用前景。开发性能优异、价格低廉的电极材料是促进钠离子电池早日实现商业化应用的关键，目前亟待探索和开发合适的高性能SIBs负极材料。由VI A主族中的氧/硫/硒组成的化合物作为SIBs负极材料具有成本相对较低、环境友好、理论容量和安全性较高的优点，受到研究者的广泛关注。由于氧/硫/硒化物负极材料的电子电导率不能满足电池大倍率充放电的需求，在电化学循环过程中伴随着巨大的体积膨胀，造成电极材料的粉碎与坍塌，该类材料在SIBs中的应用还存在很大挑战。通过对近期文献的调研，本文主要综述了氧/硫/硒化物负极材料的储钠机理和电化学性能，深入探讨此类材料用作SIBs负极的优势和挑战。针对金属氧/硫/硒化物材料存在的导电性能差、循环过程中颗粒团聚以及缓慢离子扩散动力学等问题，总结了与导电碳复合、结构调控、改善电解液等改性方法，最后对氧/硫/硒化物负极材料的发展前景进行了展望。

关键词: 钠离子电池, 负极材料, 金属氧化物, 金属硫化物, 金属硒化物

Abstract:

Low-cost and environmentally friendly sodium-ion batteries (SIBs) have great application prospects in the next generation of low-speed electric vehicle power and large-scale energy storage systems. The key to promoting the commercial application of SIBs is to develop electrode materials with excellent electrochemical performance and a low-cost. It is important to explore and fabricate appropriate high-performance SIB anodes. Compounds composed of oxygen/sulfur/selenium in group VI A as SIB anodes are low cost and environmentally friendly and have high theoretical capacity and safety, therefore attracting extensive attention from researchers. However, oxide/sulfide/selenide-anode materials cannot meet the rate performance demand due to their low electrical conductivity. In addition, the electrochemical cycling process is accompanied by a huge volume expansion, resulting in the crushing of the electrode, hindering the application of oxides/sulfides/selenides. Examining recent literature, this paper reviews the sodium storage mechanism of oxide/sulfide/selenide-anode materials and discusses their advantages and challenges. Some modification methods, such as composites with conductive carbon, structure control, and electrolyte improvement, are summarized as possible solutions to problems such as low conductivity, self-agglomeration, and sluggish kinetics. Finally, the development prospects of oxides/sulfides/selenides are forecasted for SIB anodes.

Key words: sodium ion batteries, anode materials, metal oxides, metal sulfides, metal selenides

中图分类号:

TM 911

位广玲, 江颖, 周佳辉, 王紫恒, 黄永鑫, 谢嫚, 吴锋. 钠离子电池金属氧/硫/硒化物负极材料研究进展[J]. 储能科学与技术, 2020, 9(5): 1318-1326.

Guangling WEI, Ying JIANG, Jiahui ZHOU, Ziheng WANG, Yongxin HUANG, Man XIE, Feng WU. Research progress on metal oxides/sulfides/selenides anode materials of sodium ion batteries[J]. Energy Storage Science and Technology, 2020, 9(5): 1318-1326.

图/表 1

参考文献 39

1	YABUUCHI N, KUBOTA K, DAHBI M, et al. Research development on sodium-ion batteries[J]. Chemical Reviews, 2014, 114(23): 11636-11682.
2	WU F, ZHOU J, LUO R, et al. Reduced graphene oxide aerogel as stable host for dendrite-free sodium metal anode[J]. Energy Storage Materials, 2019, 22: 376-383.
3	WANG H, ZHU C, CHAO D, et al. Nonaqueous hybrid lithium-ion and sodium-ion capacitors[J]. Advanced Materials, 2017, 29(46): doi: 10.1002/adma.201702093.
4	KLEIN F, JACHE B, BHIDE A, et al. Conversion reactions for sodium-ion batteries[J]. Physical Chemistry Chemical Physics, 2013, 15(38): 15876-15887.
5	ZHANG N, HAN X, LIU Y, et al. 3D porous γ-Fe₂O₃@C Nanocomposite as high-performance anode material of Na-ion batteries[J]. Advanced Energy Materials, 2015, 5(5): doi:10.1002/aenm.20 1401123.
6	LIU H, CAO F, ZHENG H, et al. In situ observation of the sodiation process in CuO nanowires[J]. Chemical Communications, 2015, 51(52): 10443-10446.
7	LU Y, ZHANG N, ZHAO Q, et al. Micro-nanostructured CuO/C spheres as high-performance anode materials for Na-ion batteries[J]. Nanoscale, 2015, 7(6): 2770-2776.
8	XU M, XIA Q, YUE J, et al. Rambutan-like hybrid hollow spheres of carbon confined Co₃O₄ nanoparticles as advanced anode materials for sodium-ion batteries[J]. Advanced Functoinal Materials, 2019, 29: doi： 10.1002/adfm.2018073776.
9	GU M, KUSHIMA A, SHAO Y, et al. Probing the failure mechanism of SnO₂ nanowires for sodium-ion batteries[J]. Nano Letters, 2013, 13(11): 5203-5211.
10	WANG M, WANG X, YAO Z, et al. SnO₂ Nanoflake arrays coated with polypyrrole on a carbon cloth as flexible anodes for sodium-ion batteries[J]. ACS Applied Materials & Interfaces, 2019, 11(27): 24198-24204.
11	XU H, QIN L, WANG Z, et al. Toward advanced sodium-ion batteries a wheel-inspired yolk-shell design for large-volume-change anode materials[J]. Journal of Materials Chemistry A, 2018, 6: 13153-13163.
12	LIANG J, YUAN C, LI H, et al. Growth of SnO₂ nanoﬂowers on N-doped carbon nanoﬁbers as anode for Li- and Na-ion batteries[J]. Nano-Micro Letters, 2018, 10(2): doi: 10.1007/S40820-017-0172-2.
13	KIM J, PARK S, PARK J, et al. Uniquely structured composite microspheres of metal sulfides and carbon with cubic nanorooms for highly efficient anode materials for sodium-ion batteries[J]. Journal of Materials Chemistry A, 2019, 7(6): 2636-2645.
14	HU Z, WANG L, ZHANG K, et al. MoS₂ nanoflowers with expanded interlayers as high-performance anodes for sodium-ion batteries[J]. Angewandte Chemie International Edition, 2014, 126(47): 13008-13012.
15	PAN Q, ZHANG Q, ZHENG F, et al. Construction of MoS₂/C hierarchical tubular heterostructures for high-performance sodium ion batteries[J]. ACS Nano, 2018, 12(12): 12578-12586.
16	WALTER M, ZUEND T, KOVALENKO M. Pyrite (FeS₂) nanocrystals as inexpensive high-performance lithium-ion cathode and sodium-ion anode materials[J]. Nanoscale, 2015, 7(20): 9158-9163.
17	LIU Y, FANG Y, ZHAO Z, et al. A ternary Fe_1-_xS@porous carbon nanowires/reduced graphene oxide hybrid film electrode with superior volumetric and gravimetric capacities for flexible sodium ion batteries[J]. Advanced Energy Materials, 2019, 9(9): doi: 10.1002/aenm.201803052.
18	JIN A, KIM M, LEE K, et al. Spindle-like Fe₇S₈/N-doped carbon nanohybrids for high-performance sodium ion battery anodes[J]. Nano Research, 2019, 12(3): 695-700.
19	CHANG X, MA Y, YANG M, et al. In-situ solid-state growth of N, S codoped carbon nanotubes encapsulating metal sulfides for high-efficient-stable sodium ion storage[J]. Energy Storage Materials, 2019, 23: 358-366.
20	SHUANG W, HUANG H, KONG L, et al. Nitrogen-doped carbon shell-confined Ni₃S₂composite nanosheets derived from Ni-MOF for high performance sodium-ion battery anodes[J]. Nano Energy, 2019, 62: 154-163.
21	QI H, WANG L, ZUO T, et al. Hollow structure VS₂@reduced graphene oxide (RGO) architecture for enhanced sodium-ion battery performance[J]. Chemelectrochem, 2020, 7(1): 78-85.
22	ZHOU J, WANG L, YANG M, et al. Hierarchical VS₂nanosheet assemblies: A universal host material for the reversible storage of alkali metal ions[J]. Advanced Materials, 2017, 29(35): doi: 10.1002/adma.20 1702061.
23	YANG S, PARK S, KANG Y. Mesoporous CoSe₂ nanoclusters threaded with nitrogen-doped carbon nanotubes for high-performance sodium-ion battery anodes[J]. Chemical Engineering Journal, 2019, 370: 1008-1018.
24	ZHANG Z, YANG X, FU Y, et al. Ultrathin molybdenum diselenide nanosheets anchored on multi-walled carbon nanotubes as anode composites for high performance sodium-ion batteries[J]. Journal of Power Sources, 2015, 296: 2-9.
25	WANG H, LAN X, JIANG D, et al. Sodium storage and transport properties in pyrolysis synthesized MoSe₂ nanoplates for high performance sodium-ion batteries[J]. Journal of Power Sources, 2015, 283: 187-194.
26	TANG Y, ZHAO Z, WANG Y, et al. Carbon-stabilized interlayer-expanded few-layer MoSe₂nanosheets for sodium ion batteries with enhanced rate capability and cycling performance[J]. ACS Applied Materials & Interfaces, 2016, 8(47): 32324-32332.
27	KO Y, CHOI S, PARK S, et al. Hierarchical MoSe₂ yolk-shell microspheres with superior Na-ion storage properties[J]. Nanoscale, 2014, 6(18): doi: 10.1039/C4NR02538E.
28	CHOI S, KANG Y. Fullerene-like MoSe₂ nanoparticles-embedded CNT balls with excellent structural stability for highly reversible sodium-ion storage[J]. Nanoscale, 2016, 8(7): 4209-4216.
29	ZHANG Z, FU Y, YANG X, et al. Hierarchical MoSe₂ nanosheets/reduced graphene oxide composites as anodes for lithium-ion and sodium-ion batteries with enhanced electrochemical performance[J]. ChemNanoMat, 2015, 1(6): 409-414.
30	YANG X, ZHANG Z, FU Y, et al. Porous hollow carbon spheres decorated with molybdenum diselenide nanosheets as anodes for highly reversible lithium and sodium storage[J]. Nanoscale, 2015, 7(22): 10198-10203.
31	XIE D, TANG W, WANG Y, et al. Facile fabrication of integrated three-dimensional C-MoSe₂/reduced graphene oxide composite with enhanced performance for sodium storage[J]. Nano Research, 2016, 9(6): 1618-1629.
32	TANG Y, ZHAO Z, WANG Y, et al. Carbon-stabilized interlayer-expanded few-layer MoSe₂nanosheets for sodium ion batteries with enhanced rate capability and cycling performance[J]. ACS Applied Materials & Interfaces, 2016, 8(47): 32324-32332.
33	ZHANG K, HU Z, LIU X, et al. FeSe₂ microspheres as a high-performance anode material for Na-ion batteries[J]. Advanced Materials, 2015, 27(21): 3305-3309.
34	XU X, LIU J, LIU J, et al. A general metal-organic framework (MOF)-derived selenidation strategy for in situ carbon-encapsulated metal selenides as high-rate anodes for Na-ion batteries[J]. Advanced Functional Materials, 2018, 28(16): doi: 10.1002/adfm.201707573.
35	ZHANG K, PARK M, ZHOU L, et al. Urchin-like CoSe₂ as a high-performance anode material for sodium-ion batteries[J]. Advanced Functional Materials, 2016, 26(37): 6728-6735.
36	TANG C, WEI X, CAI X, et al. ZnSe microsphere/multiwalled carbon nanotube composites as high-rate and long-life anodes for sodium-ion batteries[J]. ACS Applied Materials & Interfaces, 2018, 10(23): 19626-19632.
37	ZHOU P, ZHANG M, WANG L, et al. Synthesis and electrochemical performance of ZnSe electrospinning nanofibers as an anode material for lithium ion and sodium ion batteries[J]. Frontiers in Chemistry, 2019, doi: 10.3389/fchem.2019.00569. doi: 10.3389/fchem.2019.00569
38	FANG G, WANG Q, ZHOU J, et al. Metal organic framework-templated synthesis of bimetallic selenides with rich phase boundaries for sodium-ion storage and oxygen evolution reaction[J]. ACS Nano, 2019, 13(5): 5635-5645.
39	ZHANG S, AI Y, WU S, et al. 3D CoMoSe₄ nanosheet arrays converted directly from hydrothermally processed CoMoO₄ nanosheet arrays by plasma-assisted selenization process toward excellent anode material in sodium-ion battery[J]. Nanoscale Research Letters, 2019, 14(1): doi: 10.1186/S1167-019-3035-6.

[1]	徐雄文, 聂阳, 涂健, 许峥, 谢健, 赵新兵. 普鲁士蓝正极软包钠离子电池的滥用性能[J]. 储能科学与技术, 2022, 11(7): 2030-2039.
[2]	申晓宇, 岑官骏, 乔荣涵, 朱璟, 季洪祥, 田孟羽, 金周, 闫勇, 武怿达, 詹元杰, 俞海龙, 贲留斌, 刘燕燕, 黄学杰. 锂电池百篇论文点评（2022.4.1—2022.5.31）[J]. 储能科学与技术, 2022, 11(7): 2007-2022.
[3]	张平, 康利斌, 王明菊, 赵广, 罗振华, 唐堃, 陆雅翔, 胡勇胜. 钠离子电池储能技术及经济性分析[J]. 储能科学与技术, 2022, 11(6): 1892-1901.
[4]	张浩然, 车海英, 郭凯强, 申展, 张云龙, 陈航达, 周煌, 廖建平, 刘海梅, 马紫峰. Sn掺杂NaNi_1/3Fe_1/3Mn_1/3-_x Sn _x O₂ 正极材料制备及其电化学性能[J]. 储能科学与技术, 2022, 11(6): 1874-1882.
[5]	赵易飞, 杨振东, 李凤, 谢召军, 周震. 氮掺杂碳包覆Na₃V₂ （PO₄ ） ₂F₃ 钠离子电池正极材料的制备与性能[J]. 储能科学与技术, 2022, 11(6): 1883-1891.
[6]	乔荣涵, 岑官骏, 申晓宇, 田孟羽, 季洪祥, 田丰, 起文斌, 金周, 武怿达, 詹元杰, 闫勇, 贲留斌, 俞海龙, 刘燕燕, 黄学杰. 锂电池百篇论文点评（2022.2.1—2022.3.31）[J]. 储能科学与技术, 2022, 11(5): 1289-1304.
[7]	汪红辉, 吴泽钦, 储德韧. 轻度过放模式下钛酸锂电池性能及热安全性[J]. 储能科学与技术, 2022, 11(5): 1305-1313.
[8]	胡海燕, 侴术雷, 肖遥. 基于分子轨道杂化的高电压钠离子电池层状氧化物正极材料[J]. 储能科学与技术, 2022, 11(4): 1093-1102.
[9]	孙畅, 邓泽荣, 江宁波, 张露露, FANG Hui, 杨学林. 钠离子电池正极材料氟磷酸钒钠研究进展[J]. 储能科学与技术, 2022, 11(4): 1184-1200.
[10]	刘倩楠, 胡伟平, 轷喆. 钠离子电池磷基负极材料研究进展[J]. 储能科学与技术, 2022, 11(4): 1201-1210.
[11]	岑官骏, 朱璟, 乔荣涵, 申晓宇, 季洪祥, 田孟羽, 田丰, 金周, 闫勇, 武怿达, 詹元杰, 俞海龙, 贲留斌, 刘燕燕, 黄学杰. 锂电池百篇论文点评（2021.12.1—2022.1.31）[J]. 储能科学与技术, 2022, 11(3): 1077-1092.
[12]	赵志强, 刘恒均, 徐熙祥, 潘圆圆, 李庆浩, 李洪森, 胡涵, 李强. 储能科学中的磁性表征技术[J]. 储能科学与技术, 2022, 11(3): 818-833.
[13]	田孟羽, 朱璟, 岑官骏, 乔荣涵, 申晓宇, 季洪祥, 田丰, 金周, 闫勇, 武怿达, 詹元杰, 俞海龙, 贲留斌, 刘燕燕, 黄学杰. 锂电池百篇论文点评（2021.10.1—2021.11.30）[J]. 储能科学与技术, 2022, 11(1): 297-312.
[14]	李鹏辉, 吴彩文, 任建鹏, 吴文娟. 木质素作为锂离子电池电极材料的研究进展[J]. 储能科学与技术, 2022, 11(1): 66-77.
[15]	孙德旺, 蒋必志, 袁涛, 郑时有. 钛铌氧化物用于锂离子电池负极的研究进展[J]. 储能科学与技术, 2021, 10(6): 2127-2143.