Energy Storage Science and Technology ›› 2020, Vol. 9 ›› Issue (2): 409-414.doi: 10.19799/j.cnki.2095-4239.2019.0291

Previous Articles     Next Articles

Effect of precursor microstructure on the performance of LiNi0.85Co0.10Mn0.05O2 cathode materials

CHEN Long, ZHANG Erdong, IQBAL Azhar, LI Daocong, YANG Maoping, XIA Xin()   

  1. Institute of Engineering Research, Hefei Guoxuan High-Tech Power Energy Co. , Ltd. , Hefei 230012, Anhui, China
  • Received:2019-12-27 Revised:2020-02-10 Online:2020-03-05 Published:2020-03-15
  • Contact: Xin XIA E-mail:xiaxin@gotion.com.cn

Abstract:

In this work, the nucleation and crystal growth processes of the precursor can be controlled by adjusting the ammonia concentration and pH value during the co-precipitation processes, and two types of high-nickel Ni0.85Co0.10Mn0.05(OH)2 precursors with different particle structures (agglomerated vs. uniform) are synthesized. The as-synthesized precursors show almost similar physical and chemical properties. After sintering process, the obtained LiNi0.85Co0.10Mn0.05O2 cathodes also showed similar initial charge/discharge capacities and rate performance. However, LiNi0.85Co0.10Mn0.05O2 cathode resulted from the precursor with uniform structure demonstrates better cycling performance (98.3% capacity retention after 50 cycles at 1 C) than that of the cathode with agglomerated structure (96.9%). The LiNi0.85Co0.10Mn0.05O2 cathode with uniform structure shows stable redox peak position and voltage interval after cycle test by dQ ·dV -1 analysis, which indicated the lower polarization loss. Further SEM characterization also revealed the suppression of the microcracks that maintain the mechanical integrity of the particles throughout the cycling process along with the establishment of a stable electrode/electrolyte interface to improved cycling stability.

Key words: lithium ion battery, cathode precursors, secondary particle microstructure, LiNi0.85Co0.10Mn0.05O2

CLC Number: