Energy Storage Science and Technology ›› 2022, Vol. 11 ›› Issue (7): 2274-2281.doi: 10.19799/j.cnki.2095-4239.2021.0639

• Energy Storage System and Engineering • Previous Articles     Next Articles

Simulation of serpentine cooling structure of battery pack considering mass flow

Jiayu YUAN(), Xinguang LI(), Wenchao WANG, Chengkuo FU   

  1. School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao 266500, Shandong, China
  • Received:2021-12-01 Revised:2021-12-22 Online:2022-07-05 Published:2022-06-29
  • Contact: Xinguang LI E-mail:yuanjiayu2014@outlook.com;tutulxg@126.com

Abstract:

A serpentine pipeline battery pack thermal management system with a unidirectional flow structure and bidirectional convection structure was designed for a square lithium iron phosphate battery for electric vehicles, respectively, to address the problem of high surface temperature and poor temperature uniformity during discharge of a large-capacity square lithium-ion power battery pack. To examine the cooling performance of the two thermal management systems, the electrochemical-thermal coupling model of a single cell was firstly developed, and after the model was confirmed experimentally, the maximum battery pack temperature, cooling time, and maximum temperature difference under various mass flow rates were compared and simulated. The cooling time of the unidirectional flow structure is shorter than that of the bidirectional convection structure, and the maximum temperature difference of the bidirectional convection structure's battery pack is smaller than that of the unidirectional flow structure; under a large mass flow rate, the coolant temperature will rise due to the rapid coolant flow rate, affecting the cooling effect.

Key words: square lithium battery, serpentine structure, battery thermal management, liquid cooling, mass flow rate

CLC Number: