硅基负极与电解液化学反应的分析与抑制策略

doi:10.19799/j.cnki.2095-4239.2021.0722

摘要/Abstract

摘要：

硅基材料因其高能量密度、适中的充放电平台以及丰富的储量成为最具有潜力的下一代锂离子电池负极材料，但其较差的循环稳定性是目前硅基负极材料应用的瓶颈。目前的研究主要通过导电性改进、控制体积膨胀和改进固体电解质界面这三方面来改进材料，并取得了一定的效果。但是，目前的改进主要是从电化学的角度出发，忽略了硅基材料与电解液之间的本征化学反应。本文综述了清华大学化工系魏飞课题组近年来在硅基负极与电解液本征化学反应分析与抑制策略的系列工作，从硅基材料与电解液的反应动力学出发，发现了影响硅基负极界面稳定性的另外因素，对其进行深入研究的基础上，提出了抑制副反应的有效策略，研究了抑制本征化学反应的策略。结果表明，通过引入陶瓷包覆层形成规整人造SEI层，在保证锂离子和电子的传输前提下，可有效抑制硅基材料与电解液的化学反应。本文对硅基材料与电解液的本征化学反应的抑制提出了有效策略，为提高硅基负极材料循环稳定性提供了新思路，有效指导了硅基负极材料的发展。

关键词: 硅基负极, 副反应, 陶瓷层, 锂离子电池

Abstract:

Owing to its high energy density, moderate charging and discharging platform, and abundant reserves, silicon-based material has emerged as one of the most promising anode materials for lithium-ion batteries. However, its low cyclic stability limits its usefulness. To date, previous studies have mainly concentrated on electrochemically driven interfacial reactions during cycling and have neglected the intrinsic chemical reactivity between the anode and the electrolyte. This paper reviews previous research on the intrinsic reaction between silicon and electrolyte and strategies for suppressing the side reaction. Other factors affecting the interface stability of silicon base anode were discovered on the basis of the reaction kinetics of silicon base material and electrolyte, and effective strategies for inhibiting side reactions were proposed. To suppress the side reaction effectively, a protective layer should be designed on the surface of silicon, which could suppress the penetration of fluorine to protect the silicon. Furthermore, the protective layer should have the ability to allow the lithium ion and electron to pass through. An appealing perspective was proposed to improve the performance of silicon anodes and effectively guide their development.

Key words: silicon anode, side reaction, ceramic layer, lithium-ion battery

中图分类号:

O 646.54

于春辉, 何姿颖, 张晨曦, 林贤清, 肖哲熙, 魏飞. 硅基负极与电解液化学反应的分析与抑制策略[J]. 储能科学与技术, 2022, 11(6): 1749-1759.

YU Chunhui, HE Ziying, ZHANG Chenxi, LIN Xianqing, XIAO Zhexi, WEI Fei. The analyses and suppressing strategies of silicon anode with the electrolyte[J]. Energy Storage Science and Technology, 2022, 11(6): 1749-1759.

图/表 11

图1

图2

图3

图4

图5

图6

图7

图8

图9

图10

图11

参考文献 25

1	SUN Y M, LIU N, CUI Y. Promises and challenges of nanomaterials for lithium-based rechargeable batteries[J]. Nature Energy, 2016, 1: 16071.
2	DUNN B, KAMATH H, TARASCON J M. Electrical energy storage for the grid: A battery of choices[J]. Science, 2011, 334(6058): 928-935.
3	ARMAND M, TARASCON J M. Building better batteries[J]. Nature, 2008, 451(7179): 652-657.
4	GOODENOUGH J B, KIM Y. Challenges for rechargeable Li batteries[J]. Chemistry of Materials, 2010, 22(3): 587-603.
5	LU Y X, RONG X H, HU Y S, et al. Research and development of advanced battery materials in China[J]. Energy Storage Materials, 2019, 23: 144-153.
6	LUO F, LIU B N, ZHENG J Y, et al. Review—nano-silicon/carbon composite anode materials towards practical application for next generation Li-ion batteries[J]. Journal of the Electrochemical Society, 2015, 162(14): A2509-A2528.
7	AUPPERLE F, VON ASPERN N, BERGHUS D, et al. The role of electrolyte additives on the interfacial chemistry and thermal reactivity of Si-anode-based Li-ion battery[J]. ACS Applied Energy Materials, 2019, 2(9): 6513-6527.
8	VEITH G M, BAGGETTO L, SACCI R L, et al. Direct measurement of the chemical reactivity of silicon electrodes with LiPF₆-based battery electrolytes[J]. Chemical Communications (Cambridge, England), 2014, 50(23): 3081-3084.
9	SEYFERTH D. Dimethyldichlorosilane and the direct synthesis of methylchlorosilanes. the key to the silicones industry[J]. Organometallics, 2001, 20(24): 4978-4992.
10	YU C H, LIN X Q, CHEN X, et al. Suppressing the side reaction by a selective blocking layer to enhance the performance of Si-based anodes[J]. Nano Letters, 2020, 20(7): 5176-5184.
11	姜晓萍, 左翔, 蔡烽, 等. 六氟磷酸锂的热分解动力学研究[J]. 电源技术, 2012, 36(4): 467-469.
	JIANG X P, ZUO X, CAI F, et al. Decomposition kinetics research of LiFP₆ at elevated temperature[J]. Chinese Journal of Power Sources, 2012, 36(4): 467-469.
12	YANG H, ZHUANG G V, ROSS P N J. Thermal stability of LiPF₆ salt and Li-ion battery electrolytes containing LiPF₆[J]. Journal of Power Sources, 2006, 161(1): 573-579.
13	GAVRITCHEV K, SHARPATAYA G A, SMAGIN A, et al. Calorimetric study of thermal decomposition of lithium hexafluorophosphate[J]. Journal of Thermal Analysis and Calorimetry, 2003, 73: 71-83.
14	YU C H, CHEN X, XIAO Z X, et al. Silicon carbide as a protective layer to stabilize Si-based anodes by inhibiting chemical reactions[J]. Nano Letters, 2019, 19(8): 5124-5132.
15	WANG X L, BAI S Z, LI F, et al. Effect of plasma nitriding and titanium nitride coating on the corrosion resistance of titanium[J]. The Journal of Prosthetic Dentistry, 2016, 116(3): 450-456.
16	FERRAZ E P, SVERZUT A T, FREITAS G P, et al. Bone tissue response to plasma-nitrided titanium implant surfaces[J]. Journal of Applied Oral Science: Revista FOB, 2015, 23(1): 9-13.
17	GUO L T, WU H T, LIU X C, et al. Effect of fluoride corrosion on the bonding strength of Ti-porcelain under static loads[J]. Materials Letters, 2009, 63(28): 2486-2488.
18	RIZZI M, GATTI G, MIGLIARIO M, et al. Effect of zirconium nitride physical vapor deposition coating on preosteoblast cell adhesion and proliferation onto titanium screws[J]. The Journal of Prosthetic Dentistry, 2014, 112(5): 1103-1110.
19	GUO L T, LIU X C, HE Z Y, et al. Effect of fluoride corrosion on the bonding strength of Ti-porcelain[J]. Materials Letters, 2008, 62(14): 2200-2202.
20	NAKAGAWA M, MATONO Y, MATSUYA S, et al. The effect of Pt and Pd alloying additions on the corrosion behavior of titanium in fluoride-containing environments[J]. Biomaterials, 2005, 26(15): 2239-2246.
21	LIU X Y, CHU P K, DING C X. Surface modification of titanium, titanium alloys, and related materials for biomedical applications[J]. Materials Science and Engineering: Reports, 2004, 47(3/4): 49-121.
22	刘马林. 流化床-化学气相沉积技术在先进核燃料制备中的应用进展[J]. 化工进展, 2019, 38(4): 1646-1653.
	LIU M L. Research activities on FB-CVD technology application in advanced nuclear fuel fabrication[J]. Chemical Industry and Engineering Progress, 2019, 38(4): 1646-1653.
23	LIU R Z, ZHAO J, LIU M L, et al. Preparation, performance and nuclear applications of silicon carbide materials prepared by FB-CVD method[J]. Journal of the Chinese Ceramic Society, 2020, 48(3): 381-390.
24	KATOH Y, SNEAD L L. Silicon carbide and its composites for nuclear applications-Historical overview[J]. Journal of Nuclear Materials, 2019, 526: doi: 10.1016/j.jnucmat.2019.151849.
25	KOYANAGI T, TERRANI K, HARRISON S, et al. Additive manufacturing of silicon carbide for nuclear applications[J]. Journal of Nuclear Materials, 2021, 543: doi: 10.1016/j.jnucmat. 2020.152577.

[1]	李海涛, 孔令丽, 张欣, 余传军, 王纪威, 徐琳. N/P设计对高镍NCM/Gr电芯性能的影响[J]. 储能科学与技术, 2022, 11(7): 2040-2045.
[2]	刘显茜, 孙安梁, 田川. 基于仿生翅脉流道冷板的锂离子电池组液冷散热[J]. 储能科学与技术, 2022, 11(7): 2266-2273.
[3]	陈龙, 夏权, 任羿, 曹高萍, 邱景义, 张浩. 多物理场耦合下锂离子电池组可靠性研究现状与展望[J]. 储能科学与技术, 2022, 11(7): 2316-2323.
[4]	易顺民, 谢林柏, 彭力. 基于VF-DW-DFN的锂离子电池剩余寿命预测[J]. 储能科学与技术, 2022, 11(7): 2305-2315.
[5]	祝庆伟, 俞小莉, 吴启超, 徐一丹, 陈芬放, 黄瑞. 高能量密度锂离子电池老化半经验模型[J]. 储能科学与技术, 2022, 11(7): 2324-2331.
[6]	王宇作, 王瑨, 卢颖莉, 阮殿波. 孔结构对软碳负极储锂性能的影响[J]. 储能科学与技术, 2022, 11(7): 2023-2029.
[7]	孔为, 金劲涛, 陆西坡, 孙洋. 对称蛇形流道锂离子电池冷却性能[J]. 储能科学与技术, 2022, 11(7): 2258-2265.
[8]	霍思达, 薛文东, 李新丽, 李勇. 基于CiteSpace知识图谱的锂电池复合电解质可视化分析[J]. 储能科学与技术, 2022, 11(7): 2103-2113.
[9]	邓健想, 赵金良, 黄成德. 高能量锂离子电池硅基负极黏结剂研究进展[J]. 储能科学与技术, 2022, 11(7): 2092-2102.
[10]	欧宇, 侯文会, 刘凯. 锂离子电池中的智能安全电解液研究进展[J]. 储能科学与技术, 2022, 11(6): 1772-1787.
[11]	韩俊伟, 肖菁, 陶莹, 孔德斌, 吕伟, 杨全红. 致密储能：基于石墨烯的方法学和应用实例[J]. 储能科学与技术, 2022, 11(6): 1865-1873.
[12]	辛耀达, 李娜, 杨乐, 宋维力, 孙磊, 陈浩森, 方岱宁. 锂离子电池植入传感技术[J]. 储能科学与技术, 2022, 11(6): 1834-1846.
[13]	燕乔一, 吴锋, 陈人杰, 李丽. 锂离子电池负极石墨回收处理及资源循环[J]. 储能科学与技术, 2022, 11(6): 1760-1771.
[14]	沈秀, 曾月劲, 李睿洋, 李佳霖, 李伟, 张鹏, 赵金保. γ射线辐照交联原位固态化阻燃锂离子电池[J]. 储能科学与技术, 2022, 11(6): 1816-1821.
[15]	武怿达, 张义, 詹元杰, 郭亚奇, 张辽, 刘兴江, 俞海龙, 赵文武, 黄学杰. 氧化硼修饰的钴酸锂材料及其电化学性能[J]. 储能科学与技术, 2022, 11(6): 1687-1692.