[1] KAPSALIS V, HADELLIS L. Optimal operation scheduling of electric water heaters under dynamic procing[J]. Sustainable Cities and Society, 2017, 31: 109-121.
[2] YIN Haijiao, YANG Zhao, CHEN Aiqiang, et al. Experimental research on a novel cold storage defrost method based on air by pass circulation and electric heater[J]. Energy, 2012, 37(1): 623-631.
[3] WANG M C, CHEN Y P, WU J F, et al. Heat transfer enhancement of folded helical baffle electric heaters with one-plus-two U-tube units[J]. Applied Thermal Engineering, 2016, 102: 586-595.
[4] 张寅平, 李业发, 葛新石, 等. 一种相变蓄热电供暖器: CN 95229702.7[P]. 1955-12-7.
[5] 张寅平, 狄洪发, 王馨, 等. 一种民用相变蓄能电取暖器: CN 01275868. X[P]. 2001-12-7.
[6] BROUSSEAU P, LACROIX M. Study of the performance of a multi-layer PCM storage unit[J]. Energy Conversations and Management, 1996, 37: 599-609.
[7] LACROIX M, DUONG T. Experimental improvement of heat transfer in a latent heat thermal energy storage unit with embedded
heat sources[J]. Energy Conservation and Management, 1998, 39(8): 703-716.
[8] LOUADI A, LACROIX M. Thermal performance of a latent heat energy storage ventilated panel for electric load management[J]. International Journal of Heat and Mass Transfer, 1999, 42(2): 275-286.
[9] 刘靖, 王馨, 张寅平, 等. 高温相变蓄热电采暖器蓄放热特性的实验研究[J]. 工程热物理学报, 2004, 25: 99-102.
LIU Jing, WANG Xin, ZHANG Yinping, et al. Experimental research on high-temperature phase change thermal energy storage heater[J]. Journal of Engineering Thermophysics, 2004, 25: 99-102.
[10] 马贵阳, 王智慧, 阎润生, 等. 相变蓄热电暖器的制作及性能测试[J]. 抚顺石油学院学报, 2003, 23(3): 50-53.
MA Guiyang, WANG Zhihui, YAN Runsheng, et al. Making and capability testing of electrical heater with phase change accumulator[J]. Journal of Fushun Petroleum Institute, 2003, 23(3): 50-53.
[11] 李传, 孙泽, 丁玉龙. 高温填充床相变储热球的储热特性[J]. 储能科学与技术, 2013, 2(5): 480-485.
LI Chuan, SUN Ze, DING Yulong. A numerical investigation into the charge behaviour of a spherical phase change material particle for high temperature thermal energy storage in packed beds[J]. Energy Storage Science and Technology, 2013, 2(5): 480-485.
[12] YE Feng, GE Zhiwei, DING Yulong, et al. Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage[J]. Particuology, 2014, 12 (4): 56-60.
[13] QIN Yue, LENG Guanghui, YU Xiang, et al. Sodium sulfate- diatomite composite materials for high temperature thermal energy storage[J]. Powder Technology, 2014, 282: 37-42.
[14] JIANG Zhu, LENG Guanghui, YE Feng, et al. Form-stable LiNO3-NaNO3-KNO3-Ca(NO3)2/calcium silicate composite phase change material (PCM) for mid-low temperature thermal energy storage[J]. Energy Conversion and Management, 2015, 106: 165-172.
[15] GE Zhiwei, YE Feng, CAO Hui, et al. Carbonate-salt-based composite materials for medium and high temperature thermal energy storage[J]. Particuology, 2014, 12(4): 77-81.
[16] GE Zhiwei, YE Feng, DING Yulong. Composite materials for thermal energy storage: Enhancing performance through microstructures[J]. ChemSusChem, 2014, 7: 1318-1325.
[17] GE Zhiwei, LI Yongliang, LI Dacheng, et al. Thermal energy storage: Challenges and the role of particle technology[J]. Particuology, 2014, 12: 2-8.
[18] 李传, 葛志伟, 金翼, 等. 基于复合相变材料储热单元的储热特性[J]. 储能科学与技术, 2015, 4(2): 169-175.
LI Chuan, GE Zhiwei, JIN Yi, et al. Heat transfer behaviour of thermal energy storage components using composite phase change materials[J]. Energy Storage and Technology, 2015, 4(2): 169-175.
[19] ZHAO B, LI C, JIN Y. Heat transfer performance of thermal energy storage components containing composite phase change materials[J]. IET Renewable Power Generation, 2016, 10(10): 1515-1522.
|