储能科学与技术 ›› 2024, Vol. 13 ›› Issue (6): 2039-2043.doi: 10.19799/j.cnki.2095-4239.2023.0956

• 储能测试与评价 • 上一篇    下一篇

极限工况下储能电池包热适应性

孙琦(), 彭豪(), 孟庆国, 孔德凯, 冯睿   

  1. 中能建储能科技(武汉)有限公司,湖北 武汉 430200
  • 收稿日期:2023-12-28 修回日期:2024-01-09 出版日期:2024-06-28 发布日期:2024-06-26
  • 通讯作者: 彭豪 E-mail:sunqi123@ceec.net.cn;penghao@ceec.net.cn
  • 作者简介:孙琦(1989—),男,硕士,工程师,从事储能系统热管理研究,E-mail:sunqi123@ceec.net.cn

Thermal adaptability of energy storage battery pack in extreme conditions

Qi SUN(), Hao PENG(), Qingguo MENG, Dekai KONG, Rui FENG   

  1. Energy storage Technology (Wuhan) Co. , Ltd. , Wuhan 430200, Hubei, China
  • Received:2023-12-28 Revised:2024-01-09 Online:2024-06-28 Published:2024-06-26
  • Contact: Hao PENG E-mail:sunqi123@ceec.net.cn;penghao@ceec.net.cn

摘要:

对液冷储能电池包进行室温环境下热仿真分析,与相同工况下电池包热测试结果进行对比分析,并结合实际工艺水平对热仿真参数进行调整以对标测试结果,保证测点的仿真值与实验值误差在1 ℃之内。利用相同热仿真参数对高温及低温的极限环境工况对电池包进行热仿真计算,其中高温工况电芯发热状态为放电末态,低温工况为电芯静置状态。计算结果表明高温工况下电芯平均温度为39.2 ℃,最高温度为41.2 ℃,低温工况下电芯平均温度为7.8 ℃,最低温度为3.7 ℃,表明该型液冷电池包产品在极限环境下均可以让电芯处在正常工作温度区间。运用本文所述热仿真方法可以较为全面地分析电池包在极限环境下电池包的热状态,在实验成本较高或条件无法满足的情况下评估储能系统热性能。

关键词: 液冷, 锂离子电池, 充放电设备, 热特性

Abstract:

The thermal simulation analysis of a liquid-cooled energy storage battery pack was conducted at room temperature, and the results were compared and analyzed against thermal test results obtained under the same working conditions. The simulation parameters were adjusted to match the technological level, ensuring the error between the simulated and experimental values at measurement points remained within 1 ℃. Using these parameters, thermal simulations of the battery pack were performed under extreme environmental conditions of high and low temperatures. In the high-temperature scenario, the battery cells reached their final discharge state, while in the low-temperature scenario, they remained in a static state. The calculations indicate that the average cell temperature under high-temperature conditions was 39.2 ℃, with the highest temperature recorded at 41.2 ℃. Conversely, the average cell temperature under low-temperature conditions was 7.8 ℃, with the lowest temperature at 3.7 ℃. These findings indicate that the liquid-cooled battery pack can maintain cell temperatures within the normal operating range, even in extreme environments. The thermal simulation method outlined in this study offers a comprehensive approach to analyzing the battery pack's thermal state under extreme conditions, providing an avenue to assess the thermal performance of the energy storage system when experimental costs are prohibitive, or conditions cannot be replicated.

Key words: liquid cooling, lithium-ion batteries, charging and discharging equipment, thermal characteristic

中图分类号: