国内外动力锂电池安全性测试标准及规范综述

doi:10.12028/j.issn.2095-4239.2018.0203

摘要/Abstract

摘要： 研究了国内外具有代表性的动力锂电池安全性测试标准及规范，包括ISO 12405、IEC 62660、SAE J2464、SAE J2929、UL 2580、ECE R100-02、GB/T 31485、GB/T 31467.3和FreedomCAR。将安全性测试项目分为机械安全性、环境安全性和电气安全性3类，详细介绍了各试验项目在不同标准规范的具体参数，总结了我国国标与国外标准的异同，最后指出了现行标准规范中的不足，提出了改进意见。

关键词: 动力锂电池, 安全性测试, 标准

Abstract: Some of typical safety standards and regulations of lithium ion traction batteries are compared, including ISO 12405, IEC 62660, SAE J2464, SAE J2929, UL 2580, ECE R100-02, GB/T 31485, GB/T 31467.3 and FreedomCAR. Safety tests are classified into three type tests, i·e. mechanical, environmental and electrical tests. The specific parameters of each test item in different standards and regulations are introduced in details. The similarities and differences of Chinese national standards with foreign standards are summarized, some shortcomings in the current standards are pointed out, and suggestions for improvement are put forward.

Key words: lithium ion power batteries, safety test, standards

中图分类号:

TM912.2

祝夏雨, 金朝庆, 赵鹏程, 邱景义, 陆林, 明海. 国内外动力锂电池安全性测试标准及规范综述[J]. 储能科学与技术, 2019, 8(2): 428-441.

ZHU Xiayu, JIN Zhaoqing, ZHAO Pengcheng, QIU Jingyi, LU Lin, MING Hai. A review of international safety testing standards and regulations for lithium ion power batteries[J]. Energy Storage Science and Technology, 2019, 8(2): 428-441.

参考文献

[1] International Energy Agency. Global EV Outlook 2018[R]. Paris:IEA, 2018.
[2] Japanese Industrial Standards Committee. JIS C8715-2:2012 Secondary lithium cells and batteries for use in industrial applications-Part 2:Tests and requirements of safety[S]. Japanese Industrial Standards, 2012.
[3] 杨杰, 张凯庆. 国内外锂离子动力电池安全性技术标准对比分析[J]. 客车技术与研究, 2015(2):48-50. YANG Jie, ZHANG Kaiqing. Comparative analysis on safety standards of lithium-ion power battery at home and abroad[J]. Bus &Coach Technology and Research, 2015(2):48-50.
[4] The United Nations Economic Commission for Europe. UN/ECE Regulation No. 100.02. Uniform provisions concerning the approval of vehicles with regard to specific requirements for the electric power train[S]. Economic Commission of Europe, 2013.
[5] 邵杰, 谢佶宏, 赵奕凡, 等. 车用动力电池测试标准存在的问题及发展趋势[J]. 标准科学, 2017(9):82-87. SHAO Jie, XIE Jihong, ZHAO Yifan, et al. Existing problems and development trend of power battery test standards for electric vehicle[J]. Standard Science, 2017(9):82-87.
[6] DOUGHTY D H, CRAFTS C C. SAND 2005-3123:FreedomCAR electrical energy storage systems abuse test manual for electric and hybrid electric vehicle applications[R]. Sandia National Laboratories, 2005.
[7] RUIZA V, PFRANGA A, KRISTONA A, et al. A review of international abuse testing standards and regulations for lithium ion batteries in electric and hybrid electric vehicles[J]. Renewable and Sustainable Energy Reviews,2018(81):1427-1452.
[8] International Organization for Standardization. ISO 12405-1:2011 Electrically propelled road vehicles -Test specification for lithium-ion traction battery packs and systems -Part 1:High-power applications[S]. International Organization for Standardization, 2011.
[9] International Organization for Standardization. ISO 12405-2:2012 Electrically propelled road vehicles -Test specification for lithium-ion traction battery packs and systems -Part 2:High-energy applications[S]. International Organization for Standardization, 2012.
[10] International Organization for Standardization. ISO 12405-3:2014 Electrically propelled road vehicles -Test specification for lithium-ion traction battery packs and systems -Part 3:Safety performance requirements[S]. International Organization for Standardization, 2014.
[11] 全国汽车标准化技术委员会. GB/T 31467.3-2015电动汽车用锂离子动力蓄电池包和系统第3部分:安全性要求与测试方法[S]. 北京:中国标准出版社, 2015. National Technical Committee of Auto Standardization. GB/T 31467.3-2015 Lithium-ion traction battery pack and system for electric vehicles-Part 3:Safety requirements and test methods[S]. Beijing:Standards Press of China, 2015.
[12] 全国电工电子产品环境条件与环境试验标准化技术委员会. GB/T 2423.4-2008电工电子产品环境试验第2部分:试验方法试验Db:交变湿热(12 h+12 h循环)[S]. 北京:中国标准出版社, 2008. National Technical Committee of Environmental Conditions and Environmental Testing Standardization of Electric and Electronic Products. GB/T 2423.4-2008 Environmental testing for electric and electronic products-Part 2:Test method-Test Db:Damp heat, cyclic(12 h +12 h cycle)[S]. Beijing:Standards Press of China, 2008.
[13] International Electrotechnical Commission. IEC 62660-2:2010 Secondary lithium-ion cells for the propulsion of electric road vehicles-Part 2:Reliability and abuse testing[S]. International Electrotechnical Commission, 2010.
[14] International Electrotechnical Commission. IEC 62660-3:2016 Secondary lithium-ion cells for the propulsion of electric road vehicles-Part 3:Safety Requirements[S]. International Electrotechnical Commission, 2016.
[15] International Society of Automotive Engineers. SAE J2929_2013 Safety standard for electric and hybrid vehicle propulsion battery systems utilizing lithium-based rechargeable cells[S]. SAE International, 2013.
[16] Underwriter Laboratories Inc. UL 2580:2013 Batteries for use in electric vehicles[S].UL Standard Designation, 2013.
[17] International Society of Automotive Engineers. SAE J2464_2009 Electric and hybrid electric vehicle rechargeable energy storage system (RESS) safety and abuse testing[S]. SAE International, 2009.
[18] International Organization for Standardization. ISO 16750-3:2012 Road vehicles-Environmental conditions and testing for electrical and electronic equipment-Part 3:Mechanical loads[S]. International Organization for Standardization, 2012.
[19] International Electrotechnical Commission. IEC 60086-2-27:2008 Environmental testing -Part 2-27:Tests-Test Ea and guidance:Shock[S]. International Electrotechnical Commission, 2008.
[20] 全国汽车标准化技术委员会. GB/T 31485-2015电动汽车用动力蓄电池安全要求及试验方法[S]. 北京:中国标准出版社, 2015. National Technical Committee of Auto Standardization. GB/T 31485-2015 Safety requirements and test methods for traction battery of electric vehicle[S]. Beijing:Standards Press of China, 2015.
[21] LAMB J, ORENDORFF C J. Evaluation of mechanical abuse techniques in lithium ion batteries[J]. J. Power Sources, 2014(247):189-196.
[22] DUBANIEWICZ T H, DUCARME J P. Are lithium ion cells intrinsically safe?[R]. Las Vegas:IEEE Proceedings of the industry applications society annual meeting (IAS), 2012.
[23] MALEKI H, HOWARD J N. Internal short circuit in Li-ion cells[J]. J. Power Sources, 2009(191):568-574.
[24] CAI W, WANG H, MALEKI H, et al. Experimental simulation of internal short circuit in Li-ion and Li-ion-polymer cells[J]. J. Power Sources, 2011(196):7779-7783.
[25] SPOTNITZ R, FRANKLIN J. Abuse behavior of high-power, lithium-ion cells[J]. J. Power Sources, 2003(113):81-100.
[26] DUBANIEWICZ T H, Jr, DUCARME J P. Further study of the intrinsic safety of internally shorted lithium and lithium-ion cells within methane-air[J]. J. Loss Prev. Process Ind., 2014(32):165-173.
[27] SPEK E J. Lithium ion abuse test methods improvement[R]. Portland:IEEE symposium on product compliance engineering (ISPCE), 2012.