Reviews of selected 100 recent papers for lithium batteries（Aug. 1，2016 to Sep. 30，2016）

doi:10.12028/j.issn.2095-4239.2016.0085

Abstract

Abstract: This bimonthly review paper highlights 100 recent published papers on lithium batteries. We searched the Web of Science and found 1579 papers online from Aug. 1, 2016 to Sep. 30, 2016. 100 of them were selected to be highlighted. Layered oxide and high voltage spinel cathode materials are still under extensive investigations for studying Li+ intercalation-deintercalation mechanism and evolution of surface structure, and the influences of doping, coating and interface modifications on their cycling performances. Large efforts were devoted to Si based composite anode materials for analyzing the mechanism for Li storage and SEI formation. In-situ technologies are used to analyze the kinetic process and SEI and theoretical work covers the machnism for Li storage, kinetics, SEI and solid state electrolytes. There are a few papers related to electrolyte additives, solid state lithium batteries, Li/S batteries, Li-air batteries, and modeling.

Key words: lithium batteries, cathode material, anode material, electrolyte, battery technology

WU Yida, JIN Zhou, ZHANG Hua, ZHAO Junnian, ZHAN Yuanjie, CHEN Yuyang, CHEN Bin,WANG Hao, YU Hailong, BEN Liubin, LIU Yanyan, HUANG Xuejie. Reviews of selected 100 recent papers for lithium batteries（Aug. 1，2016 to Sep. 30，2016）[J]. Energy Storage Science and Technology, 2016, 5(6): 869-881.

References

[1] CHEN C J，PANG W K，MORI T，et al. The origin of capacity fade in the Li₂MnO₃ center dot LiMO₂ (M=Li, Ni, Co, Mn) microsphere positive electrode：An operando neutron diffraction and transmission X-ray microscopy study[J]. Journal of the American Chemical Society，2016，138（28）：8824-8833.

[2] JACKSON D H，LASKAR M R，FANG S Y，et al. Optimizing AlF₃ atomic layer deposition using trimethylaluminum and TaF₅：Application to high voltage Li-ion battery cathodes[J]. Journal of Vacuum Science & Technology A，2016，34（3）：doi: 10.1116/1.4943385.

[3] QIU B，ZHANG M H，WU L J，et al. Gas-solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries[J]. Nature Communications，2016，7：doi: 10.1038/ncomms12108.

[4] YAN P F，ZHENG J M，ZHENG J X，et al. Ni and Co segregations on selective surface facets and rational design of layered lithium transition-metal oxide cathodes[J]. Advanced Energy Materials，2016，6（9）：doi: 10.1002/aenm.201670054.

[5] ZHAO Y，LIU J T，WANG S B，et al. Surface structural transition induced by gradient polyanion-doping in Li-rich layered oxides：Implications for enhanced electrochemical performance[J]. Advanced Functional Materials，2016，26（26）：4760-4767.

[6] DUAN J G，HU G R，CAO Y B，et al. Enhanced electrochemical performance and storage property of LiNi_0.815Co_0.15Al_0.035O₂ via Al gradient doping[J]. Journal of Power Sources，2016，326：322-330.

[7] LI B，WANG J，CAO Z L，et al. The role of SnO₂ surface coating in the electrochemical performance of Li_1.2Mn_0.54Co_0.13Ni_0.13O₂ cathode materials[J]. Journal of Power Sources，2016，325：84-90.

[8] ZHOU J G，WANG J，CUTLER J，et al. Imaging the surface morphology, chemistry and conductivity of LiNi_1/3Fe_1/3Mn_4/3O₄ crystalline facets using scanning transmission X-ray microscopy[J]. Physical Chemistry Chemical Physics，2016，18（33）：22789-22793.

[9] GABRIELLI G，AXMANN P，DIEMANT T，et al. Combining optimized particle morphology with a niobium-based coating for long cycling-life, high-voltage lithium-ion batteries[J]. ChemSusChem，2016，9（13）：1670-1679.

[10] LIU G Q，DU Y L，LIU W B，et al. Study on the action mechanism of doping transitional elements in spinel LiNi_0.5Mn_1.5O₄[J]. Electrochimica Acta，2016，209：308-314.

[11] MAO J，MA M Z，LIU P P，et al. The effect of cobalt doping on the morphology and electrochemical performance of high-voltage spinel LiNi_0.5Mn_1.5O₄ cathode material[J]. Solid State Ionics，2016，292：70-74.

[12] PANG W K，LU C Z，LIU C E，et al. Crystallographic origin of cycle decay of the high-voltage LiNi_0.5Mn_1.5O₄ spinel lithium-ion battery electrode[J]. Physical Chemistry Chemical Physics，2016，18（26）：17183-17189.

[13] BOULET-ROBLIN L，BOREL P，SHEPTYAKOV D，et al. Operando neutron powder diffraction using cylindrical cell design：The case of LiNi_0.5Mn_1.5O₄ vs graphite[J]. Journal of Physical Chemistry C，2016，120（31）：17268-17273.

[14] MANCINI M，AXMANN P，GABRIELLI G，et al. A high-voltage and high-capacity Li_1+xNi_0.5Mn_1.5O₄ cathode material：From synthesis to full lithium-ion cells[J]. ChemSusChem，2016，9（14）：1843-1849.

[15] ABE S，IWASAKI S，SHIMONISHI Y，et al. Effect of Ni and Ti substitutions on Li_1.05Mn₂O₄-delta electrical conductivities at high temperature[J]. Solid State Communications，2016，244：64-67.

[16] ZETTSU N，KIDA S，UCHIDA S，et al. Sub-2 nm thick fluoroalkylsilane self-assembled monolayer-coated high voltage spinel crystals as promising cathode materials for lithium ion batteries[J]. Scientific Reports，2016，6：doi: 10.1038/srep31999.

[17] SAMARASINGHA P B，SOTTMANN J，MARGADONNA S，et al. In situ synchrotron study of ordered and disordered LiMn_1.5Ni_0.5O₄ as lithium ion battery positive electrode[J]. Acta Materialia，2016，116：290-297.

[18] CHEN J，ZHAO N，LI G D，et al. Superior performance of LiFePO₄/C with porous structure synthesized by an in situ polymerization restriction method for lithium ion batteries[J]. Materials Chemistry and Physics，2016，180：244-249.

[19] KRUMEICH F，WASER O，PRATSINIS S E. Thermal annealing dynamics of carbon-coated LiFePO₄ nanoparticles studied by in-situ analysis[J]. Journal of Solid State Chemistry，2016，242：96-102.

[20] PARK K Y，PARK I，KIM H，et al. Lithium-excess olivine electrode for lithium rechargeable batteries[J]. Energy & Environmental Science，2016，9（9）：2902-2915.

[21] SAULNIER M，AUCLAIR A，LIANG G，et al. Manganese dissolution in lithium-ion positive electrode materials[J]. Solid State Ionics，2016，294：1-5.

[22] CHEN R Y，MAAWAD E，KNAPP M，et al. Lithiation-driven structural transition of VO₂F into disordered rock-salt Li_xVO₂F[J]. RSC Advances，2016，6（69）：65112-65118.

[23] CHEN R Y，REN S H，MU X K，et al. High-performance low-temperature Li⁺ intercalation in disordered rock-salt Li-Cr-V oxyfluorides[J]. ChemElectroChem，2016，3（6）：892-895.

[24] AOKI N，OMACHI A，UOSAKI K，et al. Structural study of electrochemically lithiated Si(111) by using soft X-ray emission spectroscopy combined with scanning electron microscopy and through X-ray diffraction measurements[J]. ChemElectroChem，2016，3（6）：959-965.

[25] KIM S H，YOOK S H，KANNAN A G，et al. Enhancement of the electrochemical performance of silicon anodes through alloying with inert metals and encapsulation by graphene nanosheets[J]. Electrochimica Acta，2016，209：278-284.

[26] FAN H Y，LI X Q，HE H Q，et al. Electrochemical properties and thermal stability of silicon monoxide anode for rechargeable lithium-ion batteries[J]. Electrochemistry，2016，84（8）：574-577.

[27] SEIDLHOFER B K，JERLIU B，TRAPP M，et al. Lithiation of crystalline silicon as analyzed by operando neutron reflectivity[J]. ACS Nano，2016，10（8）：7458-7466.

[28] CHO I，GONG S，SONG D，et al. Mussel-inspired polydopamine-treated copper foil as a current collector for high-performance silicon anodes[J]. Scientific Reports，2016，6：doi: 10.1038/srep30945.

[29] YOO S，KIM J，KANG B. Characterizing local structure of SiO_x using confocal m-Raman spectroscopy and its effects on electrochemical property[J]. Electrochimica Acta，2016，212：68-75.

[30] BREITUNG B，BAUMANN P，SOMMER H，et al. In situ and operando atomic force microscopy of high-capacity nano-silicon based electrodes for lithium-ion batteries[J]. Nanoscale，2016，8（29）：14048-14056.

[31] YOON I，ABRAHAM D P，LUCHT B L，et al. In situ measurement of solid electrolyte interphase evolution on silicon anodes using atomic force microscopy[J]. Advanced Energy Materials，2016，6（12）：doi: 10.1002/aenm.201600099.

[32] JESCHULL F，LINDGREN F，LACEY M J，et al. Influence of inactive electrode components on degradation phenomena in nano-Si electrodes for Li-ion batteries[J]. Journal of Power Sources，2016，325：513-524.

[33] JIANG Y Z，WANG H K，LI B B，et al. Interfacial engineering of Si/multi-walled carbon nanotube nanocomposites towards enhanced lithium storage performance[J]. Carbon，2016，107：600-606.

[34] DAS S，DUTTA D，ARAUJO R B，et al. Probing the pseudo-1-D ion diffusion in lithium titanium niobate anode for Li-ion battery[J]. Physical Chemistry Chemical Physics，2016，18（32）：22323-22330.

[35] LIU J Y，CHEN X，KIM J，et al. High volumetric capacity three-dimensionally sphere-caged secondary battery anodes[J]. Nano Letters，2016，16（7）：4501-4507.

[36] FAROOQ U，DOH C H，PERVEZ S A，et al. Rate-capability response of graphite anode materials in advanced energy storage systems：A structural comparison[J]. Carbon Letters，2016，17（1）：39-44.

[37] ZHOU X S，YU L，LOU X W. Formation of uniform N-doped carbon-coated SnO₂ submicroboxes with enhanced lithium storage properties[J]. Advanced Energy Materials，2016，6（14）：doi: 10.1002/aenm.201600451.

[38] PARK S K，KIM H K，ROH K C，et al. The confinement of SnO₂ nanocrystals into 3D RGO architectures for improved rate and cyclic performance of LIB anode[J]. Crystengcomm，2016，18（32）：6049-6054.

[39] LEE H，SONG J，KIM Y J，et al. Structural modulation of lithium metal-electrolyte interface with three-dimensional metallic interlayer for high-performance lithium metal batteries[J]. Scientific Reports，2016，6：doi: 10.1038/srep30830.

[40] YUN Q B，HE Y B，LV W，et al. Chemical dealloying derived 3D porous current collector for Li metal anodes[J]. Advanced Materials，2016，28（32）：doi: 10.1002/adma.201601409.

[41] ZHANG D，ZHOU Y，LIU C H，et al. The effect of the carbon nanotube buffer layer on the performance of a Li metal battery[J]. Nanoscale，2016，8（21）：11161-11167.

[42] LEE G H，LEE J W，CHOI J I，et al. Ultrafast discharge/charge rate and robust cycle life for high-performance energy storage using ultrafine nanocrystals on the binder-free porous graphene foam[J]. Advanced Functional Materials，2016，26（28）：5139-5148.

[43] PARK J，JEONG J，LEE Y，et al. Micro-patterned lithium metal anodes with suppressed dendrite formation for post lithium-ion batteries[J]. Advanced Materials Interfaces，2016，3（11）：doi: 10.1002/admi.201600140.

[44] BALABAJEW M，REINHARDT H，BOCK N，et al. In-situ raman study of the intercalation of bis(trifluoromethylsulfonyl) imid ions into graphite inside a dual-ion cell[J]. Electrochimica Acta，2016，211：679-688.

[45] RODRIGUES M T，KALAGA K，GULLAPALLI H，et al. Hexagonal boron nitride-based electrolyte composite for Li-ion battery operation from room temperature to 150℃ [J]. Advanced Energy Materials，2016，6（12）：doi: 10.1002/aenm.201600218.

[46] LIAO X L，ZHENG X W，CHEN J W，et al. Tris(trimethylsilyl) phosphate as electrolyte additive for self-discharge suppression of layered nickel cobalt manganese oxide[J]. Electrochimica Acta，2016，212：352-359.

[47] JUNG R，METZGER M，HAERING D，et al. Consumption of fluoroethylene carbonate (FEC) on Si-C composite electrodes for Li-ion batteries[J]. Journal of the Electrochemical Society，2016，163（8）：A1705-A1716.

[48] TAKEUCHI S，KOKUMAI R，NAGATA S，et al. Effect of the addition of bivalent ions on electrochemical lithium-ion intercalation at graphite electrodes[J]. Journal of the Electrochemical Society，2016，163（8）：A1693-A1696.

[49] ELLIS L D，XIA J，LOULI A J，et al. Effect of substituting LiBF₄ for LiPF₆ in high voltage lithium-ion cells containing electrolyte additives[J]. Journal of the Electrochemical Society，2016，163（8）：A1686-A1692.

[50] JURNG S，PARK S，YOON T，et al. Low-temperature performance improvement of graphite electrode by allyl sulfide additive and its film-forming mechanism[J]. Journal of the Electrochemical Society，2016，163（8）：A1798-A1804.

[51] KIM C K，SHIN D S，KIM K E，et al. Fluorinated hyperbranched cyclotriphosphazene simultaneously enhances the safety and electrochemical performance of high-voltage lithium-ion batteries[J]. ChemElectroChem，2016，3（6）：913-921.

[52] BROX S，ROSER S，HUSCH T，et al. Alternative single-solvent electrolytes based on cyanoesters for safer lithium-ion batteries[J]. ChemSusChem，2016，9（13）：1704-1711.

[53] PARK K，YU B C，GOODENOUGH J B. Li₃N as a cathode additive for high-energy-density lithium-ion batteries[J]. Advanced Energy Materials，2016，6（10）：doi: 10.1002/aenm.201502534.

[54] DOI T，MASUHARA R，HASHINOKUCHI M，et al. Concentrated LiPF₆/PC electrolyte solutions for 5-V LiNi_0.5Mn_1.5O₄ positive electrode in lithium-ion batteries[J]. Electrochimica Acta，2016，209：219-224.

[55] HORIUCHI S，YOSHIZAWA-FUJITA M，TAKEOKA Y，et al. Physicochemical and electrochemical properties of N-methyl-N-methoxymethyl pyrrolidinium bis(fluorosulfonyl) amide and its lithium salt composites[J]. Journal of Power Sources，2016，325：637-640.

[56] LIU B，YAN P F，XU W，et al. Electrochemically formed ultrafine metal oxide nanocatalysts for high-performance lithium-oxygen batteries[J]. Nano Letters，2016，16（8）：4932-4939.

[57] WUJCIK K H，WANG D R，RAGHUNATHAN A，et al. Lithium polysulfide radical anions in ether-based solvents[J]. Journal of Physical Chemistry C，2016，120（33）：18403-18410.

[58] SUN Y M，LEE H W，SEH Z W，et al. Lithium sulfide/metal nanocomposite as a high-capacity cathode prelithiation material[J]. Advanced Energy Materials，2016，6（12）：doi: 10.1002/aenm.201600154.

[59] HAN F D，YUE J，FAN X L，et al. High-performance all-solid-state lithium-sulfur battery enabled by a mixed-conductive Li₂S nanocomposite[J]. Nano Letters，2016，16（7）：4521-4527.

[60] CUI Z M，ZU C X，ZHOU W D，et al. Mesoporous titanium nitride-enabled highly stable lithium-sulfur batteries[J]. Advanced Materials，2016，28（32）：doi: 10.1002/adma.201601382.

[61] KIM K R，LEE K S，AHN C Y，et al. Discharging a Li-S battery with ultra-high sulphur content cathode using a redox mediator[J]. Scientific Reports，2016，6：doi: 10.1038/srep32433.

[62] SAHORE R，LEVIN B D，PAN M，et al. Design principles for optimum performance of porous carbons in lithium-sulfur batteries[J]. Advanced Energy Materials，2016，6（14）：doi: 10.1002/aenm.201600134.

[63] JUNG Y，KANG B. Understanding abnormal potential behaviors at the 1st charge in Li₂S cathode material for rechargeable Li-S batteries[J]. Physical Chemistry Chemical Physics，2016，18（31）：21500-21507.

[64] GLENNEBERG J，ANDRE F，BARDENHAGEN I，et al. A concept for direct deposition of thin film batteries on flexible polymer substrate[J]. Journal of Power Sources，2016，324：722-728.

[65] OTOYAMA M，ITO Y，HAYASHI A，et al. Investigation of state-of-charge distributions for LiCoO₂ composite positive electrodes in all-solid-state lithium batteries by raman imaging[J]. Chemistry Letters，2016，45（7）：810-812.

[66] CAO Y Q，MENG X B，ELAM J W. Atomic layer deposition of Li_xAl_yS solid-state electrolytes for stabilizing lithium-metal anodes[J]. ChemElectroChem，2016，3（6）：858-863.

[67] CZNOTKA E，JESCHKE S，GRUNEBAUM M，et al. Highly-fluorous pyrazolide-based lithium salt in PVDF-HFP as solid polymer electrolyte[J]. Solid State Ionics，2016，292：45-51.

[68] ZHOU W D，WANG S F，LI Y T，et al. Plating a dendrite-free lithium anode with a polymer/ceramic/polymer sandwich electrolyte[J]. Journal of the American Chemical Society，2016，138（30）：9385-9388.

[69] LI D J，DANILOV D L，GAO L，et al. Degradation mechanisms of C-6/LiFePO₄ batteries：Experimental analyses of cycling-induced aging[J]. Electrochimica Acta，2016，210：445-455.

[70] MORONI R，BORNER M，ZIELKE L，et al. Multi-scale correlative tomography of a Li-ion battery composite cathode[J]. Scientific Reports，2016，6：doi: 10.1038/srep30109.

[71] SINGLE F，HORSTMANN B，LATZ A. Dynamics and morphology of solid electrolyte interphase (SEI) [J]. Physical Chemistry Chemical Physics，2016，18（27）：17810-17814.

[72] CHEN B B，ZHOU J Q，CAI R. Analytical model for crack propagation in spherical nano electrodes of lithium-ion batteries[J]. Electrochimica Acta，2016，210：7-14.

[73] SUN F，ZIELKE L，MARKOETTER H，et al. Morphological evolution of electrochemically plated/stripped lithium microstructures investigated by synchrotron X-ray phase contrast tomography[J]. ACS Nano，2016，10（8）：7990-7997.

[74] WEBER D A，SENYSHYN A，WELDERT K S，et al. Structural insights and 3D diffusion pathways within the lithium superionic conductor Li₁₀GeP₂S₁₂[J]. Chemistry of Materials，2016，28（16）：5905-5915.

[75] ABDELLAHI A，URBAN A，DACEK S，et al. Understanding the effect of cation disorder on the voltage profile of lithium transition-metal oxides[J]. Chemistry of Materials，2016，28（15）：5373-5383.

[76] LANG M，DARMA M S，KLEINER K，et al. Post mortem analysis of fatigue mechanisms in LiNi_0.8Co_0.15Al_0.05O₂-LiNi_0.5 Co_0.2 Mn_0.3O₂- LiMn₂O₄/graphite lithium ion batteries[J]. Journal of Power Sources，2016，326：397-409.

[77] SATO S，UNEMOTO A，IKEDA T，et al. Carbon-rich active materials with macrocyclic nanochannels for high-capacity negative electrodes in all-solid-state lithium rechargeable batteries[J]. Small，2016，12（25）：3472.

[78] SMYREK P，KIM H，ZHENG Y，et al. Laser-printing and femtosecond laser-structuring of electrode materials for the manufacturing of 3D lithium-ion micro-batteries. Laser 3D Manufacturing III[C]//Unite States：California，2016：doi: 10.1117/12.2211546.

[79] ZIELKE L，SUN F，MARKOTTER H，et al. Synchrotron X-ray tomographic study of a silicon electrode before and after discharge and the effect of cavities on particle fracturing[J]. ChemElectroChem，2016，3（7）：1170-1177.

[80] PRIIMÄGI P，BRANDELL D，SRIVASTAV S，et al. Optimizing the design of 3D-pillar microbatteries using finite element modelling[J]. Electrochimica Acta，2016，209：138 -148.

[81] LIM J，LI Y Y，ALSEM D H，et al. Origin and hysteresis of lithium compositional spatiodynamics within battery primary particles[J]. Science，2016，353（6299）：566-571.

[82] LIU Z，VERHALLEN T W，SINGH D P，et al. Relating the 3D electrode morphology to Li-ion battery performance; a case for LiFePO₄[J]. Journal of Power Sources，2016，324：358-367.

[83] WANG J J，CHEN-WIEGART Y C，ENG C，et al. Visualization of anisotropic-isotropic phase transformation dynamics in battery electrode particles[J]. Nature Communications，2016，7：doi: 10.1038/ncomms12372.

[84] GENT W E，LI Y Y，AHN S，et al. Persistent state-of-charge heterogeneity in relaxed, partially charged Li₁_-_xNi_1/3Co_1/3Mn_1/3O₂ secondary particles[J]. Advanced Materials，2016，28（31）：doi: 10.1002/adma.201601273.

[85] WANG Z Y，LEE J Z，XIN H L，et al. Effects of cathode electrolyte interfacial (CEI) layer on long term cycling of all-solid-state thin-film batteries[J]. Journal of Power Sources，2016，324：342-348.

[86] DELP S A，BORODIN O，OLGUIN M，et al. Importance of reduction and oxidation stability of high voltage electrolytes and additives[J]. Electrochimica Acta，2016，209：498-510.

[87] LUCK J，LATZ A. Theory of reactions at electrified interfaces[J]. Physical Chemistry Chemical Physics，2016，18（27）：17799-17804.

[88] BENITEZ L，SEMINARIO J M. Electron transport and electrolyte reduction in the solid-electrolyte interphase of rechargeable lithium ion batteries with silicon anodes[J]. Journal of Physical Chemistry C，2016，120（32）：17978-17988.

[89] LEGGESSE E G，TSAU K H，LIU Y T，et al. Adsorption and decomposition of ethylene carbonate on LiMn₂O₄ cathode surface[J]. Electrochimica Acta，2016，210：61-70.

[90] URBAN A，MATTS I，ABDELLAHI A，et al. Computational design and preparation of cation-disordered oxides for high-energy-density Li-ion batteries[J]. Advanced Energy Materials，2016，6（15）：doi: 10.1002/aenm.201600488.

[91] WANG X L，XIAO R J，LI H，et al. Oxygen-driven transition from two-dimensional to three-dimensional transport behaviour in beta-Li₃PS₄ electrolyte[J]. Physical Chemistry Chemical Physics，2016，18（31）：21269-21277.

[92] TANAKA Y，IKEDA M，SUMITA M，et al. First-principles analysis on role of spinel (111) phase boundaries in Li_4+3xTi₅O₁₂ Li-ion battery anodes[J]. Physical Chemistry Chemical Physics，2016，18（33）：23383-23388.

[93] MORADABADI A，BAKHTIARI M，KAGHAZCHI P. Effect of anode composition on solid electrolyte interphase formation[J]. Electrochimica Acta，2016，213：8-13.

[94] SEIDL L，MARTENS S，MA J W，et al. In situ scanning tunneling microscopy studies of the SEI formation on graphite electrodes for Li⁺-ion batteries[J]. Nanoscale，2016，8（29）：14004-14014.

[95] SUMITA M，TANAKA Y，IKEDA M，et al. Charged and discharged states of cathode/sulfide electrolyte interfaces in all-solid-state lithium ion batteries[J]. Journal of Physical Chemistry C，2016，120（25）：13332-13339.

[96] ZHANG W，BOCK D C，PELLICCIONE C J，et al. Insights into ionic transport and structural changes in magnetite during multiple-electron transfer reactions[J]. Advanced Energy Materials，2016，6（10）：doi: 10.1002/aenm.201502471.

[97] HOWARD J，HOLZWARTH N A. First-principles simulations of the porous layered calcogenides Li_2+xSnO₃ and Li_2+xSnS₃[J]. Physical Review B，2016：doi: 10.1103/PhysRevB.94.064108.

[98] CHONG E Q，LINGERFELT D B，PETRONE A，et al. Classical or quantum? A computational study of small ion diffusion in II-VI semiconductor quantum dots[J]. Journal of Physical Chemistry C，2016，120（34）：19434-19441.

[99] LIAO N B，ZHENG B R，ZHANG M，et al. Atomic investigation on reversible lithium storage in amorphous silicon oxycarbide as a high power anode material[J]. Journal of Materials Chemistry A，2016，4（31）：12328-12333.

[100] KANG J，HAN B. First-principles characterization of the unknown crystal structure and ionic conductivity of Li₇P₂S₈I as a solid electrolyte for high-voltage Li ion batteries[J]. Journal of Physical Chemistry Letters，2016，7（14）：2671-2675.