Reviews of selected 100 recent papers for lithium batteries (Aug. 1,2018 to Sep. 30,2018)

doi:10.12028/j.issn.2095-4239.2018.0208

Abstract

Abstract: This bimonthly review paper highlights 100 recent published papers on lithium batteries. We searched the Web of Science and found 3283 papers online from Aug. 1, 2018 to Sep. 30, 2018. 100 of them were selected to be highlighted. This bimonthly review paper highlights 100 recent published papers on lithium batteries. We searched the Web of Science and found 3283 papers online from Aug. 1, 2018 to Sep. 30, 2018. 100 of them were selected to be highlighted. Layered oxide and high voltage spinel cathode materials are still under extensive investigations for the structure evolution and modifications. Large efforts were devoted to Si based anode material. The influence of the micro-structure of graphite on its performances are investigated. Number of papers related to metallic lithium and solid state batteries increasing very fast. There are a few papers related to solid state electrolyte, Li/S battery, Li-air battery, analyses methods, theoretical simulations, and modeling.

Key words: lithium batteries, cathode material, anode material, electrolyte, battery technology

CLC Number:

TM911

ZHAO Junnian, WU Yida, ZHAN Yuanjie, JIN Zhou, ZHANG Hua, QI Wenbin, TIAN Feng, YU Hailong, BEN Liubin, LIU Yanyan, HUANG Xuejie. Reviews of selected 100 recent papers for lithium batteries (Aug. 1,2018 to Sep. 30,2018)[J]. Energy Storage Science and Technology, 2018, 7(6): 1159-1170.

References

[1] ARIYOSHI K, INOUE T, YAMADAZ Y. Quantitative analysis of large voltage hysteresis of lithium excess materials by backstitch charge and discharge method[J]. Journal of the Electrochemical Society, 2018, 165 (11):A2675-A2681.
[2] KOMATSU H, MINATO T, MATSUNAGA T, et al. Site-selective analysis of nickel-substituted Li-rich layered material:Migration and role of transition metal at charging and discharging[J]. Journal of Physical Chemistry C, 2018, 122 (35):20099-20107.
[3] KIM J, LEE J, MA H, et al. Controllable solid electrolyte interphase in nickel-rich cathodes by an electrochemical rearrangement for stable lithium-ion batteries[J]. Advanced Materials, 2018, 30 (5):doi:10.1002/adma.201704309.
[4] PARK K J, JUNG H G, KUO L Y, et al. Improved cycling stability of LiNi_0.90Co_0.05Mn_0.05O₂ through microstructure modification by boron doping for Li-ion batteries[J]. Advanced Energy Materials, 2018, 8 (25):doi:10.1002/aenm.201801202.
[5] ZHOU L, YIN Z, TIAN H, et al. Spinel-embedded and Li₃PO₄modified Li_0.2Mn_0.54Ni_0.13Co_0.13O₂ cathode materials for high-performance Li-ion battries[J]. Applied Surface Science, 2018, 456:763-770.
[6] KIM T, ONO L K, FLECK N, et al. Transition metal speciation as a degradation mechanism with the formation of a solid-electrolyte interphase (SEI) in Ni-rich transition metal oxide cathodes[J]. Journal of Materials Chemistry A, 2018, 6 (29):14449-14463.
[7] HU E, YU X, LIN R, et al. Evolution of redox couples in Li-and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release[J]. Nature Energy, 2018, 3 (8):690-698.
[8] LIU H, ZHANG X, HE X, et al. Truncated octahedral high-voltage spinel LiNi_0.5Mn_1.5O₄ cathode materials for lithium ion batteries:Positive influences of Ni/Mn disordering and oxygen vacancies[J]. Journal of the Electrochemical Society, 2018, 165 (9):A1886-A1896.
[9] ZHENG X, LIU W, QU Q, et al. Effectively stabilizing 5 V spinel LiNi_0.5Mn_1.5O₄ cathode in organic electrolyte by polyvinylidene fluoride coating[J]. Applied Surface Science, 2018, 455:349-356.
[10] KWON Y, LEE Y, KIM S O, et al. Conducting polymer coating on a high-voltage cathode based on soft chemistry approach toward improving battery performance[J]. ACS applied materials & interfaces, 2018, 10:29457-29466.
[11] LUO Y, ZHANG Y, YAN L, et al. Octahedral and porous spherical ordered LiNi_0.5Mn_1.5O₄ spinel:The role of morphology on phase transition behavior and electrode/electrolyte interfacial properties[J]. ACS applied materials & interfaces, 2018, doi:10.1021/acsami.8b11187.
[12] NISAR U, AMIN R, ESSEHLI R, et al. Extreme fast charging characteristics of zirconia modified LiNi_0.5Mn_1.5O₄ cathode for lithium ion batteries[J]. Journal of Power Sources, 2018, 396:774-781.
[13] GORDON D, HUANG Q, MAGASINSKI A, et al. Mixed metal difluorides as high capacity conversion-type cathodes:Impact of composition on stability and performance[J]. Advanced Energy Materials, 2018, 8 (19):doi:10.1002/aenm.201800213.
[14] LU W, ZHANG L, QIN Y, et al. Calendar and cycle life of lithium-ion batteries containing silicon monoxide anode[J]. Journal of the Electrochemical Society, 2018, 165 (10):A2179-A2183.
[15] RYU J, CHEN T, BOK T, et al. Mechanical mismatch-driven rippling in carbon-coated silicon sheets for stress-resilient battery anodes[J]. Nature Communications, 2018, 9:doi:10.1038/s41467-018-05398-9.
[16] ABOUALI S, GARAKANI M A, KIM J K. Ultrafine SnO₂ nanoparticles encapsulated in ordered mesoporous carbon framework for Li-ion battery anodes[J]. Electrochimica Acta, 2018, 284:436-443.
[17] CHANG W J, KIM S H, HWANG J, et al. Controlling electric potential to inhibit solid-electrolyte interphase formation on nanowire anodes for ultrafast lithium-ion batteries[J]. Nature Communications, 2018, 9:doi:10.1038/s41467-018-05986-9.
[18] MISHRA K, GEORGE K, ZHOU X D. Submicron silicon anode stabilized by single-step carbon and germanium coatings for high capacity lithium-ion batteries[J]. Carbon, 2018, 138:419-426.
[19] KIM S H, KIM Y S, BAEK W J, et al. Nanoscale electrical degradation of silicon-carbon composite anode materials for lithium-ion batteries[J]. ACS Applied Materials & Interfaces, 2018, 10 (29):24549-24553.
[20] MOOCK D S, STEINMUELLER S O, WESSELY I D, et al. Surface functionalization of silicon, HOPG, and graphite electrodes:Toward an artificial solid electrolyte interface[J]. ACS Applied Materials & Interfaces, 2018, 10 (28):24172-24180.
[21] CHENG Q, ZHANG Y. Multi-channel graphite for high-rate lithium ion battery[J]. Journal of the Electrochemical Society, 2018, 165 (5):A1104-A1109.
[22] MAO C, WOOD M, DAVID L, et al. Selecting the best graphite for long-life, high-energy Li-ion batteries[J]. Journal of the Electrochemical Society, 2018, 165 (9):A1837-A1845.
[23] MORALES-UGARTE J E, BOLIMOWSKA E, ROUAULT H, et al. EIS and XPS investigation on SEI layer formation during first discharge on graphite electrode with a vinylene carbonate doped imidazolium based ionic liquid electrolyte[J]. Journal of Physical Chemistry C, 2018, 122 (32):18223-18230.
[24] SHI B, KANG Y, XIE H, et al. In situ measurement and experimental analysis of lithium mass transport in graphite electrodes[J]. Electrochimica Acta, 2018, 284:142-148.
[25] HABEDANK J B, KRAFT L, RHEINFELD A, et al. Increasing the discharge rate capability of lithium-ion cells with laser-structured graphite anodes:Modeling and simulation[J]. Journal of the Electrochemical Society, 2018, 165 (7):A1563-A1573.
[26] HAFEZ A M, JIAO Y, SHI J, et al. Stable metal anode enabled by porous lithium foam with superior ion accessibility[J]. Advanced Materials, 2018, 30 (30):doi:10.1002/adma.201802156.
[27] TU Z, CHOUDHURY S, ZACHMAN M J, et al. Fast ion transport at solid-solid interfaces in hybrid battery anodes[J]. Nature Energy, 2018, 3 (4):310-316.
[28] CHAI J, CHEN B, XIAN F, et al. Dendrite-free lithium deposition via flexible-rigid coupling composite network for LiNi_0.5Mn_1.5O₄/Li metal batteries[J]. Small, 2018, 14 (37):doi:10.1002/smll.201802244.
[29] KIM C, SONG G, LUO L, et al. Stress-tolerant nanoporous germanium nanofibers for long cycle life lithium storage with high structural stability[J]. ACS Nano, 2018, 12 (8):8169-8176.
[30] SMREKAR S, ZOLOFF MICHOFF M E, THOMAS J E, et al. On the effect of the carbonaceous substrate in the nucleation of Sn nanoparticles for Li-ion anodes:Experiments and first principles calculations[J]. Journal of Solid State Electrochemistry, 2018, 22 (6):1721-1733.
[31] ZHANG C, LIU S, LI G, et al. Incorporating ionic paths into 3D conducting scaffolds for high volumetric and areal capacity, high rate lithium-metal anodes[J]. Advanced Materials, 2018, 30 (33):doi:10.1002/adma.201801328.
[32] SUN B, FANG M, HUANG Z, et al. Robust current collector promoting the Li metal anode cycling with appropriate interspaces[J]. Journal of the Electrochemical Society, 2018, 165 (10):A2026-A2031.
[33] GAO Y, WANG D, LI Y, et al. Salt-based organic-inorganic nanocomposites:Towards a stable lithium metal/Li₁₀GeP₂S₁₂solid electrolyte interface[J]. Angewandte Chemie (International ed. in English), 2018, doi:10.1002/ange.201807304.
[34] ALABOINA P K, RODRIGUES S, ROTTMAYER M, et al. In situ dendrite suppression study of nanolayer encapsulated Li metal enabled by zirconia atomic layer deposition[J]. ACS applied materials & interfaces, 2018, 10:32801-32808.
[35] CHOI S, JUNG G, KIM J E, et al. Lithium intercalated graphite with preformed passivation layer as superior anode for Lithium ion batteries[J]. Applied Surface Science, 2018, 455:367-372.
[36] CUI X, CHU Y, QIN L, et al. Stabilizing Li metal anodes through a novel self-healing strategy[J]. ACS Sustainable Chemistry & Engineering, 2018, 6 (8):11097-11104.
[37] TAYLOR N J, STANGELAND-MOLO S, HASLAM C G, et al. Demonstration of high current densities and extended cycling in the garnet Li₇La₃Zr₂O₁₂ solid electrolyte[J]. Journal of Power Sources, 2018, 396:314-318.
[38] ASANO T, SAKAI A, OUCHI S, et al. Solid halide electrolytes with high lithium-ion conductivity for application in 4 V class bulk-type all-solid-state batteries[J]. Advanced materials (Deerfield Beach, Fla.), 2018:e1803075-e1803075.
[39] LI W, ZHANG S, WANG B, et al. Nanoporous adsorption effect on alteration of the Li⁺ diffusion pathway by a highly ordered porous electrolyte additive for high rate all-solid-state lithium metal batteries[J]. ACS Applied Materials & Interfaces, 2018, 10 (28):23874-23882.
[40] NOELLE R, ACHAZI A J, KAGHAZCHI P, et al. Pentafluorophenyl isocyanate as an effective electrolyte additive for improved performance of silicon-based lithium-ion full cells[J]. ACS Applied Materials & Interfaces, 2018, 10 (33):28187-28198.
[41] PANG Q, LIANG X, KOCHETKOV I R, et al. Stabilizing lithium plating by a biphasic surface layer formed insitu[J]. Angewandte Chemie-International Edition, 2018, 57 (31):9795-9798.
[42] JIAO S, REN X, CAO R, et al. Stable cycling of high-voltage lithium metal batteries in ether electrolytes[J]. Nature Energy, 2018, 3 (9):739-746.
[43] ZHANG S S, FAN X, WANG C. An in-situ enabled lithium metal battery by plating lithium on a copper current collector[J]. Electrochemistry Communications, 2018, 89:23-26.
[44] MILIEN M S, BEYER H, BEICHEL W, et al. Lithium bis (2,2,2-trifluoroethyl)phosphate Li[O₂P (OCH₂CF₃)₂]:A high voltage additive for LNMO/graphite cells[J]. Journal of the Electrochemical Society, 2018, 165 (11):A2569-A2576.
[45] KAISER N, SPANNENBERGER S, SCHMITT M, et al. Ion transport limitations in all-solid-state lithium battery electrodes containing a sulfide-based electrolyte[J]. Journal of Power Sources, 2018, 396:175-181.
[46] HAO F, MUKHERJEE P P. Mesoscale analysis of the electrolyte-electrode interface in all-solid-state Li-ion batteries[J]. Journal of the Electrochemical Society, 2018, 165 (9):A1857-A1864.
[47] NOMURA Y, YAMAMOTO K, HIRAYAMA T, et al. Quantitative operando visualization of electrochemical reactions and Li-ions in all-solid-state batteries by STEM-EELS with hyperspectral image analysis[J]. Nano letters, 2018, doi:10.1021/acs.nanolett.8b02587.
[48] KOERVER R, ZHANG W, DE BIASI L, et al. Chemo-mechanical expansion of lithium electrode materials-on the route to mechanically optimized all-solid-state batteries[J]. Energy & Environmental Science, 2018, 11 (8):2142-2158.
[49] KAWASOKO H, SHIRAKI S, SUZUKI T, et al. Extremely low resistance of Li₃PO₄ electrolyte/LiNi_0.5Mn_1.5O₄ electrode interfaces[J]. ACS Applied Materials & Interfaces, 2018, 10 (32):27498-27502.
[50] CHOI S-J, CHOI S H, BUI A D, et al. LiI-doped sulfide solid electrolyte:Enabling a high-capacity slurry-cast electrode by low-temperature post-sintering for practical all-solid-state lithium batteries[J]. ACS applied materials & interfaces, 2018, 10 (37):31404-31412.
[51] KATO A, SUYAMA M, HOTEHAMA C, et al. High-temperature performance of all-solid-state lithium-metal batteries having Li/Li₃PS₄ interfaces modified with Au thin films[J]. Journal of the Electrochemical Society, 2018, 165 (9):A1950-A1954.
[52] GEBRESILASSIE ESHETU G, JUDEZ X, LI C, et al. Ultrahigh performance all solid-state lithium sulfur batteries:Salt anion's chemistry-induced anomalous synergistic effect[J]. Journal of the American Chemical Society, 2018, 140 (31):9921-9933.
[53] ABRAHAM A, HUANG J, SMITH P F, et al. Communication-demonstration and electrochemistry of a self-forming solid state rechargeable LiI (HPN)₂ based Li/I₂ battery[J]. Journal of the Electrochemical Society, 2018, 165 (10):A2115-A2118.
[54] LI H, TAO Y, ZHANG C, et al. Dense graphene monolith for high volumetric energy density Li-S batteries[J]. Advanced Energy Materials, 2018, 8 (18):doi:10.1002/aenm.201703438.
[55] XIN X, ITO K, DUTTA A, et al. Dendrite-free epitaxial growth of lithium-metal during charging in Li-O₂ batteries[J]. Angewandte Chemie (International ed. in English), 2018, doi:10.1002/ange.201808154.
[56] AGOSTINI M, LIM D H, SADD M, et al. Rational design of low cost and high energy lithium batteries through tailored fluorine-free electrolyte and nanostructured S/C composite[J]. Chemsuschem, 2018, 11 (17):2981-2986.
[57] AGOSTINI M, HWANG J Y, KIM H M, et al. Minimizing the electrolyte volume in Li-S batteries:A step forward to high gravimetric energy density[J]. Advanced Energy Materials, 2018, 8 (26):doi:10.1002/aenm.201801560.
[58] BERGER A, FREIBERG A T S, SIEBEL A, et al. The importance of chemical reactions in the charging process of lithium-sulfur batteries[J]. Journal of the Electrochemical Society, 2018, 165 (7):A1288-A1296.
[59] WANG Y, LIN C-F, RAO J, et al. Electrochemically controlled solid electrolyte interphase layers enable superior Li-S batteries[J]. ACS Applied Materials & Interfaces, 2018, 10 (29):24554-24563.
[60] CELIK K B, CENGIZ E C, SAR T, et al. In-situ wrapping of tin oxide nanoparticles by bacterial cellulose derived carbon nanofibers and its application as freestanding interlayer in lithium sulfide based lithium-sulfur batteries[J]. Journal of Colloid and Interface Science, 2018, 530:137-145.
[61] LIU J, QIAN T, WANG M, et al. Use of tween polymer to enhance the compatibility of the Li/electrolyte interface for the high-performance and high-safety quasi-solid-state lithium-sulfur battery[J]. Nano Letters, 2018, 18 (7):4598-4605.
[62] YAN J, YU J, DING B. Mixed ionic and electronic conductor for Li-metal anode protection[J]. Advanced Materials, 2018, 30 (7):doi:10.1002/adma.201705105.
[63] YUN S, PARK S H, YEON J S, et al. Materials and device constructions for aqueous lithium-sulfur batteries[J]. Advanced Functional Materials, 2018, 28 (38):doi:10.1002/adfm.201707593.
[64] LU L L, LU Y Y, XIAO Z J, et al. Wood-inspired high-performance ultrathick bulk battery electrodes[J]. Advanced Materials, 2018, 30 (20):doi:10.1002/adma.201706745.
[65] BENITEZ A, DI LECCE D, ELIA G A, et al. A lithium-ion battery using a 3D-array nanostructured graphene-sulfur cathode and a silicon oxide-based anode[J]. Chemsuschem, 2018, 11 (9):1512-1520.
[66] TRIPURANENI R, RAKSHIT S, NADIMPALLI S P V. In situ measurement of the effect of stress on the chemical diffusion coefficient of Li in high-energy-density electrodes[J]. Journal of the Electrochemical Society, 2018, 165 (10):A2194-A2202.
[67] KARAKULINA O M, DEMORTIERE A, DACHRAOUI W, et al. In situ electron diffraction tomography using a liquid-electrochemical transmission electron microscopy cell for crystal structure determination of cathode materials for Li-ion batteries[J]. Nano Letters, 2018, doi:10.1021/acs.nanolett.8b02436.
[68] HLUSHKOU D, REISING A E, KAISER N, et al. The influence of void space on ion transport in a composite cathode for all-solid-state batteries[J]. Journal of Power Sources, 2018, 396:363-370.
[69] CHOI S, JEON M, AHN J, et al. Quantitative analysis of microstructures and reaction interfaces on composite cathodes in all-solid-state batteries using a three-dimensional reconstruction technique[J]. ACS Applied Materials & Interfaces, 2018, 10 (28):23740-23747.
[70] CASTRO F C, DRAVID V P. Characterization of lithium ion battery materials with valence electron energy-loss spectroscopy[J]. Microscopy and Microanalysis, 2018, 24 (3):214-220.
[71] MUELLER S, PIETSCH P, BRANDT B E, et al. Quantification and modeling of mechanical degradation in lithium-ion batteries based on nanoscale imaging[J]. Nature Communications, 2018, 9:doi:10.1038/s41467-018-04477-1.
[72] CHENG Q, WEI L, LIU Z, et al. Operando and three-dimensional visualization of anion depletion and lithium growth by stimulated Raman scattering microscopy[J]. Nature Communications, 2018, 9:doi:10.1038/s41467-018-05289-z.
[73] CHEN C C, MAIER J. Decoupling electron and ion storage and the path from interfacial storage to artificial electrodes[J]. Nature Energy, 2018, 3 (2):102-108.
[74] MCOWEN D W, XU S, GONG Y, et al. 3D-printing electrolytes for solid-state batteries[J]. Advanced Materials, 2018, 30 (18):doi:10.1002/adma.201707132.
[75] SHI F, PEI A, BOYLE D T, et al. Lithium metal stripping beneath the solid electrolyte interphase[J]. Proceedings of the National Academy of Sciences of the United States of America, 2018, 115 (34):8529-8534.
[76] SINGER A, ZHANG M, HY S, et al. Nucleation of dislocations and their dynamics in layered oxide cathode materials during battery charging[J]. Nature Energy, 2018, 3 (8):641-647.
[77] CARTER R, LOVE C T. Modulation of lithium plating in Li-ion batteries with external thermal gradient[J]. ACS Applied Materials & Interfaces, 2018, 10 (31):26328-26334.
[78] OKAMOTO R, HAYASHI K, MATSUMOTO S, et al. Direct observation of Mn and Ni ordering in LiMn_1.5Ni_0.5O₄ using atomic resolution scanning transmission electron microscopy[J]. Microscopy (Oxford, England), 2018, doi:10.1093/jmicro/dfy034.
[79] PRITZL D, LANDESFEIND J, SOLCHENBACH S, et al. An analysis protocol for three-electrode Li-ion battery impedance spectra:Part Ⅱ. Analysis of a graphite anode cycled vs. LNMO[J]. Journal of the Electrochemical Society, 2018, 165 (10):A2145-A2153.
[80] YAMANAKA T, ABE T, NISHIO K, et al. Diffusion of Li-deficient phases in large LiFePO₄ single crystals during chemical delithiation dagger[J]. Journal of Materials Chemistry A, 2018, 6 (23):11005-11011.
[81] GILBERT J A, MARONI V A, CUI Y, et al. Composition and impedance heterogeneity in oxide electrode cross-sections detected by Raman spectroscopy[J]. Advanced Materials Interfaces, 2018, 5 (9):doi:10.1002/admi.201701447.
[82] NAM Y J, PARK K H, OH D Y, et al. Diagnosis of failure modes for all-solid-state Li-ion batteries enabled by three-electrode cells[J]. Journal of Materials Chemistry A, 2018, 6 (30):14867-14875.
[83] RODRIGUES M T F, KALAGA K, TRASK S E, et al. Anode-dependent impedance rise in layered-oxide cathodes of lithium-ion cells[J]. Journal of the Electrochemical Society, 2018, 165 (9):A1697-A1705.
[84] LIAO B, LI H, XU M, et al. Designing low impedance interface films simultaneously on anode and cathode for high energy batteries[J]. Advanced Energy Materials, 2018, 8 (22):doi:10.1002/aenm.201800802.
[85] HILDEBRAND S, RHEINFELD A, FRIESEN A, et al. Thermal analysis of LiNi_0.4Co_0.2Mn_0.4O₂/mesocarbon microbeads cells and electrodes:State-of-charge and state-of-health influences on reaction kinetics[J]. Journal of the Electrochemical Society, 2018, 165 (2):A104-A117.
[86] LI X, QIAO Y, GUO S, et al. Direct visualization of the reversible O^2-/O^- redox process in Li-rich cathode materials[J]. Advanced Materials, 2018, 30 (14):doi:10.1002/adma.201705197.
[87] LEUNG K, PEARSE A J, TALIN A A, et al. Kinetics-controlled degradation reactions at crystalline LiPON/Li_xCoO₂ and crystalline LiPON/Li-metal interfaces[J]. Chemsuschem, 2018, 11 (12):1956-1969.
[88] CAMACHO-FORERO L E, BALBUENA P B. Exploring interfacial stability of solid-state electrolytes at the lithium-metal anode surface[J]. Journal of Power Sources, 2018, 396:782-790.
[89] OH K, CHANG D, LEE B, et al. Native defects in Li₁₀GeP₂S₁₂ and their effect on lithium diffusion[J]. Chemistry of Materials, 2018, 30 (15):4995-5004.
[90] SICOLO S, KALCHER C, SEDLMAIER S J, et al. Diffusion mechanism in the superionic conductor Li₄PS₄I studied by first-principles calculations[J]. Solid State Ionics, 2018, 319:83-91.
[91] WOOD K N, STEIRER K X, HAFNER S E, et al. Operando X-ray photoelectron spectroscopy of solid electrolyte interphase formation and evolution in Li₂S-P₂S₅ solid-state electrolytes[J]. Nature Communications, 2018, 9:doi:10.1038/s41467-018-04762-z.
[92] BENNETT J W, JONES D, HUANG X, et al. Dissolution of complex metal oxides from first-principles and thermodynamics:Cation removal from the (001) Surface of Li (Ni_1/3Mn_1/3Co_1/3)O₂[J]. Environmental Science & Technology, 2018, 52 (10):5792-5802.
[93] MOTOYAMA M, EJIRI M, YAMAMOTO T, et al. In situ scanning electron microscope observations of Li plating/stripping reactions with Pt current collectors on LiPON electrolyte[J]. Journal of the Electrochemical Society, 2018, 165 (7):A1338-A1347.
[94] SINGLE F, LATZ A, HORSTMANN B. Identifying the mechanism of continued growth of the solid-electrolyte interphase[J]. Chemsuschem, 2018, 11 (12):1950-1955.
[95] GUPTA A, KAZYAK E, CRAIG N, et al. Evaluating the effects of temperature and pressure on Li/PEO-LiTFSI interfacial stability and kinetics[J]. Journal of the Electrochemical Society, 2018, 165 (11):A2801-A2806.
[96] WANG L P, ZHANG X D, WANG T S, et al. Ameliorating the interfacial problems of cathode and solid-state electrolytes by interface modification of functional polymers[J]. Advanced Energy Materials, 2018, 8 (24):doi:10.1002/aenm.201801528.
[97] ALEXANDER G V, PATRA S, VALIYAVEETIL S, et al. Electrodes-electrolyte interfacial engineering for realizing room temperature lithium metal battery based on garnet structured solid fast Li⁺ conductors[J]. Journal of Power Sources, 2018, 396:764-773.
[98] THOMAS S, NAM E B, LEE S U. Atomistic dynamics investigation of the thermo-mechanical properties and Li diffusion kinetics in psi-graphene for LIB anode material[J]. ACS applied materials & interfaces, 2018, doi:10.1021/acsami.8b11476..
[99] FOROUZAN M M, MAZZEO B A, WHEELER D R. Modeling the effects of electrode microstructural heterogeneities on Li-ion battery performance and lifetime[J]. Journal of the Electrochemical Society, 2018, 165 (10):A2127-A2144.
[100] MURALIDHARAN A, CHAUDHARI M I, PRATT L R, et al. Molecular dynamics of lithium ion transport in a model solid electrolyte interphase[J]. Scientific Reports, 2018, 8:doi:10.1038/s41598-018-28869-x.