A calculation method for estimating internal resistance of battery online

doi:10.12028/j.issn.2095-4239.2018.0224

Abstract

Abstract: The internal resistance of the battery is one of the most important characteristic parameters of the battery, and it is also an important indicator for evaluating the performance of the battery. In order to solve the problem that the existing measurement methods of battery internal resistance, which can't be measured online and require special equipment measurement, the paper proposes a calculation method for online measurement of battery internal resistance. The method is based on the current and voltage detected by the battery in the process of charge and discharge, according to the characteristic that the current have a zero-crossing in the charge and discharge process, the definite integral of the current is used to counteract the change of the internal resistance of the battery caused by the internal chemical reaction of the battery during the calculation of the internal resistance of the battery, through a series of calculations to estimate the internal resistance of the battery. The battery internal resistance estimation algorithm is written in MATLAB, and the simulation verification is realized. The results show that the calculation method can realize online estimate the internal resistance without the aid of auxiliary equipment and test equipment, it has the advantages of simple and convenient, accurate calculation and easy implementation.

Key words: internal resistance of the battery, estimation online, zero-crossing, definite integral

CLC Number:

TQ028.8

Lyu Yangmeng, ZHU Ziwei, LIU Baoquan. A calculation method for estimating internal resistance of battery online[J]. Energy Storage Science and Technology, 2019, 8(2): 264-268.

References

[1] 刘仲明. 锂离子电池组不一致性及热管理的模拟研究[D]. 天津:天津大学, 2014. LIU Zhongming. Simulation of cell to cell variations and thermal management in lithium-ion battery packs[D]. Tianjin:Tianjin University, 2014.
[2] 王震坡, 孙逢春, 林程. 不一致性对动力电池组使用寿命影响的分析[J]. 北京理工大学学报, 2006, 26(7):577-580. WANG Zhenpo, SUN Fengchun, LIN Cheng. An analysis on the influence of inconsistencies upon the service life of power battery packs[J]. Transactions of Beijing Institute of Technology, 2006, 26(7):577-580.
[3] LI M H, FUNAKI T, HIKIHARA T. A study of output terminal voltage modeling for redox flow battery based on charge and discharge experiments[R].//Kyoto:Eletrical Engineering of Kyoto University, 2007:221-225.
[4] SU Y Y, LIU X H, LIANG S, et al. The nonlinear variable selection and its real-time detection of lead-acid battery capacity[J]. Journal of Computers, 2014, 9(3):766-773.
[5] 高玉峰, 孙磊, 杨亚丽. 铅酸蓄电池充电初始时刻欧姆内阻测量方法研究[J]. 蓄电池, 2012, 8(4):171-175. GAO Yufeng, SUN Lei, YANG Yali. Research on measuring method of ohmic resistance of lead-acid battery at the beginning of charging process[J]. Battery, 2012, 8(4):171-175.
[6] 吴红斌, 顾缃, 赵波. 蓄电池充放电管理的全过程仿真研究[J].电子测量与仪器学报, 2014, 24(8):843-849. WU Hongbin, GU Xiang, ZHAO Bo. Research on whole process simulation for charging and discharging management of battery[J]. Journal of Electronic Measurement and Instrumentation, 2014, 24(8):843-849.
[7] 李红桥, 向小民. 利用瞬间大电流放电法检测蓄电池内阻[J]. 三峡大学学报(自然科学版), 2005, 15(5):33-36. LI Hongqiao, XIANG Xiaomin. The detecition of battery internal resistance instantaneous using high load current[J]. Journal of China Three Gorges University (Natural Sciences), 2005, 15(5):33-36.
[8] ROBERT J K. A new bttery plant configuration that eliminates thermal runaway in valve regulated lead-acid batteries[J]. IEEE, 2000, 6(16):282-287.
[9] GANDHI K S. Modeling of effect of nucleation rate and electrodes, resistance on discharge characteristics of lead acid batteries[J]. Journal of the Electrochemical Society, 2015, 162(08):1506-1515.
[10] 谢力扬. 基于STM32F103的蓄电池组故障及蓄电池室环境监测系统设计[D]. 太原:太原理工大学, 2012. XIE Liyang. The design of storage battery failure and battery room environment monitoring system based on STM32F103[D]. Taiyuan:Taiyuan University of Technology, 2012.
[11] JOHNSON V H. Battery performance models in ADVISOR[J]. Journal of Power Sources, 2002, 21(110):321-329.
[12] 贾玉健, 解大, 顾羽洁. 电动汽车电池等效电路模型的分类和特点[J]. 电力与能源, 2011, 8(6):516-521. JIA Yujian, Xieda, GU Yujie, et al. Classification and Characteristics of Equivalent Circuit Models for EV'S Battery[J]. Power&Energy, 2011, 8(6):516-521.
[13] 林渭勋. 现代电力电子技术[M]. 北京:机械工业出版社, 2005. LIN Weixun. Modem power electronics[M]. Beijing:Ching Machine Press, 2005.

[1]	FENG Xiaolong, YANG Le, ZHANG Mingliang, TAO Ran, HAN Yu, WEN Jiawei, WANG Panding, SONG Weili, AI Shigang, CHEN Haosen, FANG Daining. Failure mechanics inner lithium ion batteries: In-situ multi-field experimental methods [J]. Energy Storage Science and Technology, 2019, 8(6): 1062-1075.
[2]	ZHOU Di, LU Wenbin, FU Ping. Evaluation of uncertainty of lithium battery capacity measurement and equivalent model validation method [J]. Energy Storage Science and Technology, 2019, 8(5): 862-867.
[3]	LI Ningning, SHI Changli, HE Junqiang, ZHANG Guowei. Research on control strategy of energy storage converter based on super capacitor [J]. Energy Storage Science and Technology, 2019, 8(4): 696-701.
[4]	SHI Changli, WEI Tongzheng, HUO Qunhai, HE Junqiang, ZHANG Tongshuo. A control strategy for the distributed energy storage system for a DC distribution power network [J]. Energy Storage Science and Technology, 2019, 8(4): 654-658.
[5]	SUN Wenwen, XU Yujie, DING Jie, LI Ruimin, LING Haoshu, TAN Yaqian, CHEN Haisheng. An energy system for the integration of renewable energy with energy storage in a frigid plateau region [J]. Energy Storage Science and Technology, 2019, 8(4): 678-688.
[6]	YANG Junfeng, ZHENG Xiaoyu, HUI Dong, YANG Shuili, LUO Weihua, WANG Hua. Energy storage for enhancing transmission capacities and trans-regional reserves of a UHV AC/DC power grid [J]. Energy Storage Science and Technology, 2019, 8(2): 399-407.
[7]	XU Guizhi, HU Xiao, JIN Yi, YANG Cenyu, LI Chuan, DING Yulong. Simulation modeling and analysis of a high temperature phase change heat storage and exchange device [J]. Energy Storage Science and Technology, 2019, 8(2): 338-346.
[8]	LI Ronghui, YAN Wei, WU Xiaoqiang, FAN Qinna. Nitrogen doped secondary particle graphite anode for high capacity and high rate Li ion battery [J]. Energy Storage Science and Technology, 2019, 8(1): 116-122.
[9]	LI Ronghui, KONG Lingli, WANG Jiwei, LI Wenxuan, FAN Qinna. The capacity matchup design and its effects on the performances of LTO lithium ion battery [J]. Energy Storage Science and Technology, 2019, 8(1): 191-194.
[10]	SU Wei, ZHANG Yi'chi, WEI Zengfu, XU Kaiqi, ZHONG Guobin. Advise on policy formulation of energy storage industry for the development [J]. Energy Storage Science and Technology, 2018, 7(S1): 26-33.
[11]	XU Gaojie, WANG Xiao, LU Di, JANG Miaomiao, HUANG Suqi, SHANGGUAN Xuehui, CUI Guanglei. Research progress of high safety flame retardant electrolytes for lithium-ion batteries [J]. Energy Storage Science and Technology, 2018, 7(6): 1040-1059.
[12]	LIU Jiahua, XU Xiaoying, CHEN Dazhu, HONG Jiaoling, MENG Xiao, OUYANG Xing, TANG Jiaoning. Fabrication and electrochemical performances of porous carbon nanotubes/polyaniline-modified carbon nanotube fiber [J]. Energy Storage Science and Technology, 2018, 7(6): 1226-1232.
[13]	TIAN Jun, TIAN Cuijun, WANG Yituo, TONG Lei, ZHAO Ding, HU Daozhong, GAO Hongbo, CHEN Fen, GAO Shen, WANG Zidong, LIU Jialiang. Safety test and evaluation method of lithium ion battery [J]. Energy Storage Science and Technology, 2018, 7(6): 1128-1134.
[14]	ZHANG Yonglong, XIA Huiling, LIN Jiu, CHEN Shaojie, XU Xiaoxiong. Brief analysis the safety of solid-state lithium ion batteries [J]. Energy Storage Science and Technology, 2018, 7(6): 994-1002.
[15]	HU Cejun, YANG Jijin, WANG Hangchao, CHEN Yifan, ZHANG Rongrong, LIU Wen, SUN Xiaoming. Research progress of safe lithium sulfur batteries [J]. Energy Storage Science and Technology, 2018, 7(6): 1082-1093.