有机物辅助的硫化物电解质基固态电池

doi:10.19799/j.cnki.2095-4239.2022.0206

摘要/Abstract

摘要：

固态电池利用固态电解质替换电解液，为电池的发展提供了高能量密度和高安全性的保障，其中硫化物固态电解质因其高离子电导率等优势受到了广泛关注。然而使用硫化物固态电解质还会面临电极/电解质接触较差、与电极发生界面副反应、空气稳定性差的问题，往往需要与一些有机物配合以改善电池性能，例如有机溶剂、有机电解液或聚合物。本文综述了不同种类有机物对硫化物固态电解质的辅助作用，首先回顾了基于硫化物固态电解质的准固态电池发展现状，分别从正极、电解质、负极及相互界面处添加电解液或溶液的角度，阐述了液体添加对准固态电池产生的界面浸润、构筑保护层等增益作用；其次介绍了聚合物/硫化物复合固态电解质的湿法和干法制备，对比了极性和非极性聚合物黏结剂在制备工艺上的差异，着重分析了有机组分的添加对复合电解质离子电导率等性能的影响；阐述了通过溶液法对复合正极内部界面的改善方法，并补充介绍了薄片状(Sheet-type)电极的制备工艺与发展前景；最后总结了目前有机组分在与硫化物固态电解质配合时面临的难点，展望了未来研究工作的发展方向，为组装高性能硫化物基固态电池提供思路。

关键词: 准固态电池, 固态电解质, 硫化物, 有机物, 离子电导率

Abstract:

Using solid-state electrolytes (SSEs) to replace liquid electrolytes (LEs) can guarantee a high energy density and safety for developing solid-state batteries. Sulfide-based SSEs have received much attention because of their significant advantages, like high ionic conductivity. However, they face several challenges: poor electrode/electrolyte contact, interface side reaction with an electrode, and poor air stability. As a common solution, it frequently requires collaboration with some organics, such as organic solvents or polymers, to improve battery performance. This paper reviews the synergistic effects of different organics on sulfide-based SSEs. First, the development status of quasi solid-state batteries (QSSBs) based on sulfide-based SSEs is reviewed. From the perspective of adding LEs or solution at the cathode, electrolyte, anode, and mutual interfaces, the enhancement of adding organics to QSSBs, such as interface infiltration and constructing a protective layer, are described. Second, the wet-and dry-preparation of polymer/sulfide composite SSEs are introduced. The differences in the preparation processes between polar and non-polar polymer binders are compared, and the influence of organics on the ionic conductivity of composite electrolytes is emphatically analyzed. The process of improving the internal interface of the composite cathode using the solution method is described. Moreover, the preparation technology and the development prospect of the sheet-type electrode are introduced. Finally, the difficulties faced using organics in cooperating with sulfide-based SSEs are summarized. Future research work's development directions are proposed, providing ideas for assembling high-performance sulfide-based solid-state batteries.

Key words: quasi solid-state batteries, solid-state electrolyte, sulfide, organics, ionic conductivity

中图分类号:

TM 911

李一涛, 沈凯尔, 庞全全. 有机物辅助的硫化物电解质基固态电池[J]. 储能科学与技术, 2022, 11(6): 1902-1918.

LI Yitao, SHEN Kaier, PANG Quanquan. Advance in organics enhanced sulfide-based solid-state batteries[J]. Energy Storage Science and Technology, 2022, 11(6): 1902-1918.

图/表 8

图1

图2

图3

图4

图5

图6

图7

图8

参考文献 107

1	TARASCON J M, ARMAND M. Issues and challenges facing rechargeable lithium batteries[J]. Nature, 2001, 414(6861): 359-367.
2	ARMAND M, TARASCON J M. Building better batteries[J]. Nature, 2008, 451(7179): 652-657.
3	CHEN R S, LI Q H, YU X Q, et al. Approaching practically accessible solid-state batteries: Stability issues related to solid electrolytes and interfaces[J]. Chemical Reviews, 2020, 120(14): 6820-6877.
4	XU W, WANG J L, DING F, et al. Lithium metal anodes for rechargeable batteries[J]. Energy Environ Sci, 2014, 7(2): 513-537.
5	孙滢智, 黄佳琦, 张学强, 等. 基于硫化物固态电解质的固态锂硫电池研究进展[J]. 储能科学与技术, 2017, 6(3): 464-478.
	SUN Y Z, HUANG J Q, ZHANG X Q, et al. Review on solid state lithium-sulfur batteries with sulfide solid electrolytes[J]. Energy Storage Science and Technology, 2017, 6(3): 464-478.
6	CHENG X B, ZHANG R, ZHAO C Z, et al. Toward safe lithium metal anode in rechargeable batteries: A review[J]. Chemical Reviews, 2017, 117(15): 10403-10473.
7	XU K. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries[J]. ChemInform, 2004, 35(50): doi:10.1002/chin.200450271.
8	HU Y S. Batteries: Getting solid[J]. Nature Energy, 2016, 1: 16042.
9	JANEK J, ZEIER W G. A solid future for battery development[J]. Nature Energy, 2016, 1: 16141.
10	ZHANG Q, CAO D X, MA Y, et al. Sulfide-based solid-state electrolytes: Synthesis, stability, and potential for all-solid-state batteries[J]. Advanced Materials, 2019, 31(44): doi:10.1002/adma.201901131.
11	YAMANE H, SHIBATA M, SHIMANE Y, et al. Crystal structure of a superionic conductor, Li₇P₃S₁₁[J]. Solid State Ionics, 2007, 178(15/16/17/18): 1163-1167.
12	SEINO Y, OTA T, TAKADA K, et al. A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries[J]. Energy Environ Sci, 2014, 7(2): 627-631.
13	KAMAYA N, HOMMA K, YAMAKAWA Y, et al. A lithium superionic conductor[J]. Nature Materials, 2011, 10(9): 682-686.
14	KATO Y, HORI S, SAITO T, et al. High-power all-solid-state batteries using sulfide superionic conductors[J]. Nature Energy, 2016, 1: 16030.
15	DEISEROTH H J, KONG S T, ECKERT H, et al. Li₆PS₅X: A class of crystalline Li-rich solids with an unusually high Li⁺ mobility[J]. Angewandte Chemie International Edition, 2008, 47(4): 755-758.
16	BOULINEAU S, COURTY M, TARASCON J M, et al. Mechanochemical synthesis of Li-argyrodite Li₆PS₅X (X=Cl, Br, I) as sulfur-based solid electrolytes for all solid state batteries application[J]. Solid State Ionics, 2012, 221: 1-5.
17	ADELI P, BAZAK J D, PARK K H, et al. Boosting solid-state diffusivity and conductivity in lithium superionic argyrodites by halide substitution[J]. Angewandte Chemie International Edition, 2019, 58(26): 8681-8686.
18	HARUYAMA J, SODEYAMA K, HAN L Y, et al. Space-charge layer effect at interface between oxide cathode and sulfide electrolyte in all-solid-state lithium-ion battery[J]. Chemistry of Materials, 2014, 26(14): 4248-4255.
19	KIM K J, BALAISH M, WADAGUCHI M, et al. Solid-state Li-metal batteries: Challenges and horizons of oxide and sulfide solid electrolytes and their interfaces[J]. Advanced Energy Materials, 2021, 11(1): doi: 10.1002/aenm.202002689.
20	MURAMATSU H, HAYASHI A, OHTOMO T, et al. Structural change of Li₂S-P₂S₅ sulfide solid electrolytes in the atmosphere[J]. Solid State Ionics, 2011, 182(1): 116-119.
21	LIANG Y H, LIU H, WANG G X, et al. Challenges, interface engineering, and processing strategies toward practical sulfide-based all-solid-state lithium batteries[J]. InfoMat, 2022, 4(5): doi: 10.1002/inf2.12292.
22	PANG Q, LIANG X, SHYAMSUNDER A, et al. An in vivo formed solid electrolyte surface layer enables stable plating of Li metal[J]. Joule, 2017, 1(4): 871-886.
23	PARK K H, OH D Y, CHOI Y E, et al. Solution-processable glass LiI-Li₄SnS₄ superionic conductors for all-solid-state Li-ion batteries[J]. Advanced Materials, 2016, 28(9): 1874-1883.
24	LIU Z C, FU W J, PAYZANT E A, et al. Anomalous high ionic conductivity of nanoporous β-Li₃PS₄[J]. Journal of the American Chemical Society, 2013, 135(3): 975-978.
25	RANGASAMY E, LIU Z C, GOBET M, et al. An iodide-based Li₇P₂S₈I superionic conductor[J]. Journal of the American Chemical Society, 2015, 137(4): 1384-1387.
26	ZHOU L, PARK K-H, SUN X, et al. Solvent-engineered design of argyrodite Li₆PS₅X (X = Cl, Br, I) solid electrolytes with high ionic conductivity [J]. ACS Energy Letters, 2018, 4(1): 265-270.
27	朱鑫鑫, 蒋伟, 万正威, 等. 固态锂硫电池电解质及其界面问题研究进展[J]. 储能科学与技术, 2021, 10(3): 848-862.
	ZHU X X, JIANG W, WAN Z W, et al. Research progress in electrolyte and interfacial issues of solid lithium sulfur batteries[J]. Energy Storage Science and Technology, 2021, 10(3): 848-862.
28	张桥保, 龚正良, 杨勇. 硫化物固态电解质材料界面及其表征的研究进展[J]. 物理学报, 2020, 69(22): 159-186.
	ZHANG Q B, GONG Z L, YANG Y. Advance in interface and characterizations of sulfide solid electrolyte materials[J]. Acta Physica Sinica, 2020, 69(22):159-186.
29	BANERJEE A, WANG X F, FANG C C, et al. Interfaces and interphases in all-solid-state batteries with inorganic solid electrolytes[J]. Chemical Reviews, 2020, 120(14): 6878-6933.
30	JUDEZ X, MARTINEZ-IBAÑEZ M, SANTIAGO A, et al. Quasi-solid-state electrolytes for lithium sulfur batteries: Advances and perspectives[J]. Journal of Power Sources, 2019, 438: doi:10.1016/j.jpowsour.2019.226985.
31	CHENG X L, PAN J, ZHAO Y, et al. Gel polymer electrolytes for electrochemical energy storage[J]. Advanced Energy Materials, 2018, 8(7): doi:10.1002/aenm.201702184.
32	ZHOU D, SHANMUKARAJ D, TKACHEVA A, et al. Polymer electrolytes for lithium-based batteries: Advances and prospects[J]. Chem, 2019, 5(9): 2326-2352.
33	LIU L L, QI X G, MA Q, et al. Toothpaste-like electrode: A novel approach to optimize the interface for solid-state sodium-ion batteries with ultralong cycle life[J]. ACS Applied Materials & Interfaces, 2016, 8(48): 32631-32636.
34	KIM H W, MANIKANDAN P, LIM Y J, et al. Hybrid solid electrolyte with the combination of Li₇La₃Zr₂O₁₂ ceramic and ionic liquid for high voltage pseudo-solid-state Li-ion batteries[J]. Journal of Materials Chemistry A, 2016, 4(43): 17025-17032.
35	CHENG E J, KIMURA T, SHOJI M, et al. Ceramic-based flexible sheet electrolyte for Li batteries[J]. ACS Applied Materials & Interfaces, 2020, 12(9): 10382-10388.
36	CHENG E J, SHOJI M, ABE T, et al. Ionic liquid-containing cathodes empowering ceramic solid electrolytes[J]. iScience, 2022, 25(3): doi: 10.1016/j.isci.2022.103896.
37	OH D Y, NAM Y J, PARK K H, et al. Excellent compatibility of solvate ionic liquids with sulfide solid electrolytes: Toward favorable ionic contacts in bulk-type all-solid-state lithium-ion batteries[J]. Advanced Energy Materials, 2015, 5(22): doi:10.1002/aenm.201500865.
38	SAHU G, LIN Z, LI J C, et al. Air-stable, high-conduction solid electrolytes of arsenic-substituted Li₄SnS₄[J]. Energy Environ Sci, 2014, 7(3): 1053-1058.
39	OH D Y, NAM Y J, PARK K H, et al. Slurry-fabricable Li⁺-conductive polymeric binders for practical all-solid-state lithium-ion batteries enabled by solvate ionic liquids[J]. Advanced Energy Materials, 2019, 9(16): doi: 10.1002/aenm.201802927.
40	CAO Y, ZUO P J, LOU S F, et al. A quasi-solid-state Li-S battery with high energy density, superior stability and safety[J]. Journal of Materials Chemistry A, 2019, 7(11): 6533-6542.
41	CAO Y, LOU S F, SUN Z, et al. Solvate ionic liquid boosting favorable interfaces kinetics to achieve the excellent performance of Li₄Ti₅O₁₂ anodes in Li₁₀GeP₂S₁₂ based solid-state batteries[J]. Chemical Engineering Journal, 2020, 382: doi:10.1016/j.cej.2019.123046.
42	ZHENG B Z, ZHU J P, WANG H C, et al. Stabilizing Li₁₀SnP₂S₁₂/Li interface via an in situ formed solid electrolyte interphase layer[J]. ACS Applied Materials & Interfaces, 2018, 10(30): 25473-25482.
43	CHEN Y, LI W W, SUN C Z, et al. Sustained release-driven formation of ultrastable SEI between Li₆PS₅Cl and lithium anode for sulfide-based solid-state batteries[J]. Advanced Energy Materials, 2021, 11(4): doi: 10.1002/aenm.202002545.
44	MINAMI K, HAYASHI A, TATSUMISAGO M. Characterization of solid electrolytes prepared from Li₂S-P₂S₅ glass and ionic liquids[J]. Journal of the Electrochemical Society, 2010, 157(12): A1296.
45	SHIMAMOTO K, SAKUDA A, TATSUMISAGO M, et al. Quasi-solid electrolytes comprising sulfide electrolyte and carboxylate esters: Investigation of the influence of the carboxylate ester structure[J]. Journal of the Electrochemical Society, 2020, 167(12): doi:10.1149/1945-7111/abacec.
46	SHIMAMOTO K, SAKUDA A, TATSUMISAGO M, et al. Preparation and characterization of composite quasi-solid electrolytes composed of 75Li₂S·25P₂S₅ glass and phosphate esters[J]. Journal of Power Sources, 2020, 479: doi:10.1016/j.jpowsour.2020.228826.
47	TAN D H S, BANERJEE A, DENG Z, et al. Enabling thin and flexible solid-state composite electrolytes by the scalable solution process[J]. ACS Applied Energy Materials, 2019, 2(9): 6542-6550.
48	PHILIP M A, SULLIVAN P T, ZHANG R X, et al. Improving cell resistance and cycle life with solvate-coated thiophosphate solid electrolytes in lithium batteries[J]. ACS Applied Materials & Interfaces, 2019, 11(2): 2014-2021.
49	SHIN M, GEWIRTH A A. Incorporating solvate and solid electrolytes for all-solid-state Li₂S batteries with high capacity and long cycle life[J]. Advanced Energy Materials, 2019, 9(26): doi:10.1002/aenm.201900938.
50	XU R C, HAN F D, JI X, et al. Interface engineering of sulfide electrolytes for all-solid-state lithium batteries[J]. Nano Energy, 2018, 53: 958-966.
51	WU J H, LIU S F, HAN F D, et al. Lithium/sulfide all-solid-state batteries using sulfide electrolytes[J]. Advanced Materials, 2021, 33(6): doi:10.1002/adma.202000751.
52	YAO X Y, HUANG N, HAN F D, et al. High-performance all-solid-state lithium-sulfur batteries enabled by amorphous sulfur-coated reduced graphene oxide cathodes[J]. Advanced Energy Materials, 2017, 7(17): doi:10.1002/aenm.201602923.
53	SU Y B, YE L H, FITZHUGH W, et al. A more stable lithium anode by mechanical constriction for solid state batteries[J]. Energy & Environmental Science, 2020, 13(3): 908-916.
54	FAN X L, JI X, HAN F D, et al. Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery[J]. Science Advances, 2018, 4(12): eaau9245.
55	WAN H L, LIU S F, DENG T, et al. Bifunctional interphase-enabled Li₁₀GeP₂S₁₂ electrolytes for lithium-sulfur battery[J]. ACS Energy Letters, 2021, 6(3): 862-868.
56	UMESHBABU E, ZHENG B Z, ZHU J P, et al. Stable cycling lithium-sulfur solid batteries with enhanced Li/Li₁₀ GeP₂S₁₂ solid electrolyte interface stability[J]. ACS Applied Materials & Interfaces, 2019, 11(20): 18436-18447.
57	LI Y, HALACOGLU S, SHREYAS V, et al. Highly efficient interface stabilization for ambient-temperature quasi-solid-state sodium metal batteries[J]. Chemical Engineering Journal, 2022, 434: doi:10.1016/j.cej.2022.134679.
58	YU J Z, HU Y S, PAN F, et al. A class of liquid anode for rechargeable batteries with ultralong cycle life[J]. Nature Communications, 2017, 8: 14629.
59	CONG G T, WANG W W, LAI N C, et al. A high-rate and long-life organic-oxygen battery[J]. Nature Materials, 2019, 18(4): 390-396.
60	WANG W W, LU Y C. Achieving a stable nonaqueous air cathode under true ambient air[J]. ACS Energy Letters, 2020, 5(12): 3804-3812.
61	PENG J, WU D X, SONG F M, et al. High Current density and long cycle life enabled by sulfide solid electrolyte and dendrite-free liquid lithium anode[J]. Advanced Functional Materials, 2022, 32(2): doi:10.1002/adfm.202105776.
62	LI Y, ARNOLD W, THAPA A, et al. Stable and flexible sulfide composite electrolyte for high-performance solid-state lithium batteries[J]. ACS Applied Materials & Interfaces, 2020, 12(38): 42653-42659.
63	CHEN B, HUANG Z, CHEN X T, et al. A new composite solid electrolyte PEO/Li₁₀GeP₂S₁₂/SN for all-solid-state lithium battery[J]. Electrochimica Acta, 2016, 210: 905-914.
64	ZHAO Y R, WU C, PENG G, et al. A new solid polymer electrolyte incorporating Li₁₀GeP₂S₁₂ into a polyethylene oxide matrix for all-solid-state lithium batteries[J]. Journal of Power Sources, 2016, 301: 47-53.
65	CHEN S J, WANG J Y, ZHANG Z H, et al. In-situ preparation of poly(ethylene oxide)/Li₃PS₄ hybrid polymer electrolyte with good nanofiller distribution for rechargeable solid-state lithium batteries[J]. Journal of Power Sources, 2018, 387: 72-80.
66	WANG S, ZHANG X, LIU S J, et al. High-conductivity free-standing Li₆PS₅Cl/poly(vinylidene difluoride) composite solid electrolyte membranes for lithium-ion batteries[J]. Journal of Materiomics, 2020, 6(1): 70-76.
67	ZHANG Y B, CHEN R J, WANG S, et al. Free-standing sulfide/polymer composite solid electrolyte membranes with high conductance for all-solid-state lithium batteries[J]. Energy Storage Materials, 2020, 25: 145-153.
68	LIU H, HE P G, WANG G X, et al. Thin, flexible sulfide-based electrolyte film and its interface engineering for high performance solid-state lithium metal batteries[J]. Chemical Engineering Journal, 2022, 430: doi:10.1016/j.cej.2021.132991.
69	LIU G Z, SHI J M, ZHU M T, et al. Ultra-thin free-standing sulfide solid electrolyte film for cell-level high energy density all-solid-state lithium batteries[J]. Energy Storage Materials, 2021, 38: 249-254.
70	LUO S T, WANG Z Y, FAN A R, et al. A high energy and power all-solid-state lithium battery enabled by modified sulfide electrolyte film[J]. Journal of Power Sources, 2021, 485: doi:10.1016/j.jpowsour.2020.229325.
71	LI M R, FRERICHS J E, KOLEK M, et al. Solid-state lithium-sulfur battery enabled by thio-LiSICON/polymer composite electrolyte and sulfurized polyacrylonitrile cathode[J]. Advanced Functional Materials, 2020, 30(14): doi:10.1002/adfm.201910123.
72	LEE K, KIM S, PARK J, et al. Selection of binder and solvent for solution-processed all-solid-state battery[J]. Journal of the Electrochemical Society, 2017, 164(9): A2075-A2081.
73	LEE K, LEE J, CHOI S, et al. Thiol-ene click reaction for fine polarity tuning of polymeric binders in solution-processed all-solid-state batteries[J]. ACS Energy Letters, 2019, 4(1): 94-101.
74	EMLEY B, LIANG Y L, CHEN R, et al. On the quality of tape-cast thin films of sulfide electrolytes for solid-state batteries[J]. Materials Today Physics, 2021, 18: doi: 10.1016/j.mtphys.2021.100397.
75	ZHU G L, ZHAO C Z, PENG H J, et al. A self-limited free-standing sulfide electrolyte thin film for all-solid-state lithium metal batteries[J]. Advanced Functional Materials, 2021, 31(32): doi:10.1002/adfm.202101985.
76	CAO D X, LI Q, SUN X, et al. Amphipathic binder integrating ultrathin and highly ion-conductive sulfide membrane for cell-level high-energy-density all-solid-state batteries[J]. Advanced Materials, 2021, 33(52): doi: 10.1002/adma.202105505.
77	NAM Y J, CHO S J, OH D Y, et al. Bendable and thin sulfide solid electrolyte film: A new electrolyte opportunity for free-standing and stackable high-energy all-solid-state lithium-ion batteries[J]. Nano Letters, 2015, 15(5): 3317-3323.
78	XU R C, YUE J, LIU S F, et al. Cathode-supported all-solid-state lithium–sulfur batteries with high cell-level energy density[J]. ACS Energy Letters, 2019, 4(5): 1073-1079.
79	KIM D H, LEE Y H, SONG Y B, et al. Thin and flexible solid electrolyte membranes with ultrahigh thermal stability derived from solution-processable Li argyrodites for all-solid-state Li-ion batteries[J]. ACS Energy Letters, 2020, 5(3): 718-727.
80	HAYASHI A, HARAYAMA T, MIZUNO F, et al. Mechanochemical synthesis of hybrid electrolytes from the Li₂S-P₂S₅ glasses and polyethers[J]. Journal of Power Sources, 2006, 163(1): 289-293.
81	HAYASHI A, HARAYAMA T, MIZUNO F, et al. Characterization of hybrid electrolytes prepared from the Li₂S-P₂S₅ glasses and alkanediols[J]. Solid State Ionics, 2011, 192(1): 130-133.
82	WHITELEY J M, TAYNTON P, ZHANG W, et al. Ultra-thin solid-state Li-ion electrolyte membrane facilitated by a self-healing polymer matrix[J]. Advanced Materials, 2015, 27(43): 6922-6927.
83	VILLALUENGA I, WUJCIK K H, TONG W, et al. Compliant glass-polymer hybrid single ion-conducting electrolytes for lithium batteries[J]. Proceedings of the National Academy of Sciences of the United States of America, 2016, 113(1): 52-57.
84	INADA T, TAKADA K, KAJIYAMA A, et al. Fabrications and properties of composite solid-state electrolytes[J]. Solid State Ionics, 2003, 158(3/4): 275-280.
85	HIPPAUF F, SCHUMM B, DOERFLER S, et al. Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach[J]. Energy Storage Materials, 2019, 21: 390-398.
86	ZHANG Z H, WU L P, ZHOU D, et al. Flexible sulfide electrolyte thin membrane with ultrahigh ionic conductivity for all-solid-state lithium batteries[J]. Nano Letters, 2021, 21(12): 5233-5239.
87	JIANG T L, HE P G, LIANG Y H, et al. All-dry synthesis of self-supporting thin Li₁₀GeP₂S₁₂ membrane and interface engineering for solid state lithium metal batteries[J]. Chemical Engineering Journal, 2021, 421: doi: 10.1016/j.cej.2021.129965.
88	WANG C H, YU R Z, DUAN H, et al. Solvent-free approach for interweaving freestanding and ultrathin inorganic solid electrolyte membranes[J]. ACS Energy Letters, 2022, 7(1): 410-416.
89	TERAGAWA S, ASO K, TADANAGA K, et al. Liquid-phase synthesis of a Li₃PS₄ solid electrolyte using N-methylformamide for all-solid-state lithium batteries[J]. Journal of Materials Chemistry A, 2014, 2(14): 5095.
90	YUBUCHI S, TERAGAWA S, ASO K, et al. Preparation of high lithium-ion conducting Li₆PS₅Cl solid electrolyte from ethanol solution for all-solid-state lithium batteries[J]. Journal of Power Sources, 2015, 293: 941-945.
91	ROSERO-NAVARRO N C, MIURA A, TADANAGA K. Composite cathode prepared by argyrodite precursor solution assisted by dispersant agents for bulk-type all-solid-state batteries[J]. Journal of Power Sources, 2018, 396: 33-40.
92	WANG C H, LI X, ZHAO Y, et al. Manipulating interfacial nanostructure to achieve high-performance all-solid-state lithium-ion batteries[J]. Small Methods, 2019, 3(10): doi:10.1002/smtd.201900261.
93	HAN F D, YUE J, FAN X L, et al. High-performance all-solid-state lithium-sulfur battery enabled by a mixed-conductive Li₂S nanocomposite[J]. Nano Letters, 2016, 16(7): 4521-4527.
94	LIN Z, LIU Z C, DUDNEY N J, et al. Lithium superionic sulfide cathode for all-solid lithium-sulfur batteries[J]. ACS Nano, 2013, 7(3): 2829-2833.
95	YAO X Y, LIU D, WANG C S, et al. High-energy all-solid-state lithium batteries with ultralong cycle life[J]. Nano Letters, 2016, 16(11): 7148-7154.
96	ZHANG Q, MWIZERWA J P, WAN H L, et al. Fe₃S₄@Li₇P₃S₁₁ nanocomposites as cathode materials for all-solid-state lithium batteries with improved energy density and low cost[J]. Journal of Materials Chemistry A, 2017, 5(45): 23919-23925.
97	XU R C, WANG X L, ZHANG S Z, et al. Rational coating of Li₇P₃S₁₁ solid electrolyte on MoS₂ electrode for all-solid-state lithium ion batteries[J]. Journal of Power Sources, 2018, 374: 107-112.
98	KIM D H, OH D Y, PARK K H, et al. Infiltration of solution-processable solid electrolytes into conventional Li-ion-battery electrodes for all-solid-state Li-ion batteries[J]. Nano Letters, 2017, 17(5): 3013-3020.
99	OH D Y, KIM D H, JUNG S H, et al. Single-step wet-chemical fabrication of sheet-type electrodes from solid-electrolyte precursors for all-solid-state lithium-ion batteries[J]. J Mater Chem A, 2017, 5(39): 20771-20779.
100	NAM Y J, OH D Y, JUNG S H, et al. Toward practical all-solid-state lithium-ion batteries with high energy density and safety: Comparative study for electrodes fabricated by dry- and slurry-mixing processes[J]. Journal of Power Sources, 2018, 375: 93-101.
101	KIM K T, OH D Y, JUN S, et al. Tailoring slurries using cosolvents and Li salt targeting practical all-solid-state batteries employing sulfide solid electrolytes[J]. Advanced Energy Materials, 2021, 11(17): doi: 10.1002/aenm.202003766.
102	SAKUDA A, KURATANI K, YAMAMOTO M, et al. All-solid-state battery electrode sheets prepared by a slurry coating process[J]. Journal of the Electrochemical Society, 2017, 164(12): A2474-A2478.
103	ZHANG J, ZHONG H Y, ZHENG C, et al. All-solid-state batteries with slurry coated LiNi_0.8Co_0.1Mn_0.1O₂ composite cathode and Li₆PS₅Cl electrolyte: Effect of binder content[J]. Journal of Power Sources, 2018, 391: 73-79.
104	LEE J, LEE K, LEE T, et al. In situ deprotection of polymeric binders for solution-processible sulfide-based all-solid-state batteries[J]. Advanced Materials, 2020, 32(37): doi:10.1002/adma.202001702.
105	CAO D X, SUN X, WANG Y, et al. Bipolar stackings high voltage and high cell level energy density sulfide based all-solid-state batteries[J]. Energy Storage Materials, 2022, 48: 458-465.
106	FAMPRIKIS T, CANEPA P, DAWSON J A, et al. Fundamentals of inorganic solid-state electrolytes for batteries[J]. Nature Materials, 2019, 18(12): 1278-1291.
107	LIU T F, YUAN Y F, TAO X Y, et al. Bipolar electrodes for next-generation rechargeable batteries[J]. Advanced Science, 2020, 7(17): doi:10.1002/advs.202001207.

[1]	张弘, 张阳, 赵耀, 王久林. 固固转化反应硫正极的研究进展[J]. 储能科学与技术, 2022, 11(6): 1919-1933.
[2]	魏超超, 余创, 吴仲楷, 彭林峰, 程时杰, 谢佳. Li₃PS₄ 固态电解质的研究进展[J]. 储能科学与技术, 2022, 11(5): 1368-1382.
[3]	邓诗维, 吴剑芳, 时拓. 固体电解质缺陷化学分析：晶粒体点缺陷及晶界空间电荷层[J]. 储能科学与技术, 2022, 11(3): 939-947.
[4]	许卓, 郑莉莉, 陈兵, 张涛, 常修亮, 韦守李, 戴作强. 固态电池复合电解质研究综述[J]. 储能科学与技术, 2021, 10(6): 2117-2126.
[5]	闫汶琳, 吴凡, 李泓, 陈立泉. 含硅负极在硫化物全固态电池中的应用[J]. 储能科学与技术, 2021, 10(3): 821-835.
[6]	张赛赛, 赵海雷. 石榴石型Li₇La₃Zr₂O₁₂固态锂金属电池的界面问题研究进展[J]. 储能科学与技术, 2021, 10(3): 863-871.
[7]	朱鑫鑫, 蒋伟, 万正威, 赵澍, 李泽珩, 王利光, 倪文斌, 凌敏, 梁成都. 固态锂硫电池电解质及其界面问题研究进展[J]. 储能科学与技术, 2021, 10(3): 848-862.
[8]	张鹏, 赖兴强, 沈俊荣, 张东海, 阎永恒, 张锐, 盛军, 代康伟. 固态锂电池研究及产业化进展[J]. 储能科学与技术, 2021, 10(3): 896-904.
[9]	李茜, 郁亚娟, 张之琦, 王磊, 黄凯. 全固态锂电池的固态电解质进展与专利分析[J]. 储能科学与技术, 2021, 10(1): 77-86.
[10]	吴勰, 周莉, 薛照明. 基于螯合B类锂盐的固态聚合物电解质的合成及其性能[J]. 储能科学与技术, 2021, 10(1): 96-103.
[11]	高永晟, 陈光海, 王欣然, 白莹, 吴川. 钠离子电池电解质安全性：改善策略与研究进展[J]. 储能科学与技术, 2020, 9(5): 1309-1317.
[12]	贾曼曼, 张隆. 钠离子硫化物固态电解质研究进展[J]. 储能科学与技术, 2020, 9(5): 1266-1283.
[13]	位广玲, 江颖, 周佳辉, 王紫恒, 黄永鑫, 谢嫚, 吴锋. 钠离子电池金属氧/硫/硒化物负极材料研究进展[J]. 储能科学与技术, 2020, 9(5): 1318-1326.
[14]	孙歌, 魏芷宣, 张馨元, 陈楠, 陈岗, 杜菲. 钠离子无机固体电解质研究进展[J]. 储能科学与技术, 2020, 9(5): 1251-1265.
[15]	高鹏, 张珊, 贲留斌, 赵文武, 刘中柱, 朱永明, 黄学杰. 铌元素在锂离子电池中的应用[J]. 储能科学与技术, 2020, 9(5): 1443-1453.