1 |
吴敬华, 杨菁, 刘高瞻, 等. 固态锂电池十年(2011—2021)回顾与展望[J]. 储能科学与技术, 2022, 11(9): 2713-2745.
|
|
WU J H, YANG J, LIU G Z, et al. Review and prospective of solid-state lithium batteries in the past decade(2011—2021)[J]. Energy Storage Science and Technology, 2022, 11(9): 2713-2745.
|
2 |
李文俊, 徐航宇, 杨琪, 等. 高能量密度锂电池开发策略[J]. 储能科学与技术, 2020, 9(2): 448-478.
|
|
LI W J, XU H Y, YANG Q, et al. Development of strategies for high-energy-density lithium batteries[J]. Energy Storage Science and Technology, 2020, 9(2): 448-478.
|
3 |
缪平, 姚祯, JOHN Lemmon, 等. 电池储能技术研究进展及展望[J]. 储能科学与技术, 2020, 9(3): 670-678.
|
|
MIAO P, YAO Z, JOHN L, et al. Current situations and prospects of energy storage batteries[J]. Energy Storage Science and Technology, 2020, 9(3): 670-678.
|
4 |
ZHANG X Q, ZHAO C Z, HUANG J Q, et al. Recent advances in energy chemical engineering of next-generation lithium batteries[J]. Engineering, 2018, 4(6): 831-847.
|
5 |
郭德超, 郭义敏, 张啟文, 等. 锂离子电池用无溶剂干法电极的制备及其性能研究[J]. 储能科学与技术, 2021, 10(4): 1311-1316.
|
|
GUO D C, GUO Y M, ZHANG Q W, et al. Preparation and characterization of solvent-free dry electrodes for lithium ion batteries[J]. Energy Storage Science and Technology, 2021, 10(4): 1311-1316.
|
6 |
梁卫华, 吴大勇, 舒均国. 逗号刮刀涂布流场理论分析与数值模拟[J]. 储能科学与技术, 2021, 10(2): 565-576.
|
|
LIANG W H, WU D Y, SHU J G. Theoretical analysis and numerical simulation of flow field in comma scraper coating[J]. Energy Storage Science and Technology, 2021, 10(2): 565-576.
|
7 |
RYU M, HONG Y K, LEE S Y, et al. Ultrahigh loading dry-process for solvent-free lithium-ion battery electrode fabrication[J]. Nature Communications, 2023, 14: 1316.
|
8 |
CHENG P, LIN Y Z, ZAWACKA N K, et al. Comparison of additive amount used in spin-coated and roll-coated organic solar cells[J]. Journal of Materials Chemistry A, 2014, 2(45): 19542-19549.
|
9 |
SPIEGEL S, HOFFMANN A, KLEMENS J, et al. Optimization of edge quality in the slot-die coating process of high-capacity lithium-ion battery electrodes[J]. Energy Technology, 2023, 11(5): doi: 10.1002/ente.202200684.
|
10 |
闫晓清, 胡志宇, 刘凤泉, 等. 锂离子电池内隔膜褶皱的原因及消除[J]. 储能科学与技术, 2021, 10(1): 156-162.
|
|
YAN X Q, HU Z Y, LIU F Q, et al. Causes and elimination of internal diaphragm wrinkles in lithium ion batteries[J]. Energy Storage Science and Technology, 2021, 10(1): 156-162.
|
11 |
谭鹏辉. 锂离子电池极片高效挤压涂布数值模拟及工艺基础[D]. 武汉: 华中科技大学, 2022.
|
|
TAN P H. Numerical simulation and technological basis of efficient extrusion coating of lithium ion battery pole pieces[D]. Wuhan: Huazhong University of Science and Technology, 2022.
|
12 |
林黎明. 动力锂电池浆料狭缝式挤压涂布流场数值模拟研究[D]. 郑州: 郑州大学, 2021.
|
|
LIN L M. Numerical simulation of flow field in slit extrusion coating of power lithium battery slurry[D]. Zhengzhou: Zhengzhou University, 2021.
|
13 |
AKBARZADEH V, HRYMAK A N. Coupled fluid-particle modeling of a slot die coating system[J]. AIChE Journal, 2016, 62(6): 1933-1939.
|
14 |
杜江龙, 林伊婷, 杨雯棋, 等. 模拟仿真在锂离子电池热安全设计中的应用[J]. 储能科学与技术, 2022, 11(3): 866-877.
|
|
DU J L, LIN Y T, YANG W Q, et al. Application of simulation in thermal safety design of lithium-ion batteries[J]. Energy Storage Science and Technology, 2022, 11(3): 866-877.
|
15 |
DU J L, TAO H L, CHEN Y X, et al. Thermal management of air-cooling lithium-ion battery pack[J]. Chinese Physics Letters, 2021, 38(11): 122-135.
|
16 |
HUANG T L, TAN P H, ZHONG Z Y, et al. Numerical and experimental investigation on the defect formation in lithium-ion-battery electrode-slot coating[J]. Chemical Engineering Science, 2022, 258: doi: 10.1016/j.ces.2022.117744.
|
17 |
TAN P H, DIAO S M, HUANG T L, et al. Numerical and experimental study on coating uniformity control in simultaneous double-sided slot coating with a novel contacted slot die[J]. Chemical Engineering Science, 2020, 222: doi: 10. 1016/j. ces. 2020. 115716.
|
18 |
AHN W G, LEE S H, NAM J, et al. Effect of upstream meniscus shape on dynamic wetting and operating limits of Newtonian coating liquids in slot coating bead flows[J]. Journal of Coatings Technology and Research, 2018, 15(5): 1067-1076.
|
19 |
BHAMIDIPATI K L, DIDARI S, BEDELL P, et al. Wetting phenomena during processing of high-viscosity shear-thinning fluid[J]. Journal of Non-Newtonian Fluid Mechanics, 2011, 166(12/13): 723-733.
|
20 |
PAN W T, CHEN Z K, CHEN X L, et al. Slot die coating window for a uniform fuel cell ink dispersion[J]. AIChE Journal, 2022, 68(8): e17719.
|
21 |
MALAKHOV R, TJIPTOWIDJOJO K, SCHUNK P R. Mechanics of the low-flow limit in slot-die coating with no vacuum[J]. AIChE Journal, 2019, 65(6): e16593.
|