Energy Storage Science and Technology ›› 2025, Vol. 14 ›› Issue (9): 3509-3520.doi: 10.19799/j.cnki.2095-4239.2025.0107

• Energy Storage System and Engineering • Previous Articles     Next Articles

Thermodynamic analysis of a coupled energy storage system in a coal-fired power plant

Xiaopeng WANG1(), Xiuao ZHANG1, Hongxia ZHAO1(), Qiuyan SUN2, Hao ZHANG1, Gongming XIN1, Chao BAI1()   

  1. 1.School of Energy and Power Engineering, Shandong University, Jinan 250061, Shandong, China
    2.Shandong Energy Group Electric Power Group CO. Ltd. , Jinan 250000, Shandong, China
  • Received:2025-02-06 Revised:2025-02-23 Online:2025-09-28 Published:2025-09-05
  • Contact: Hongxia ZHAO, Chao BAI E-mail:202314526@mail.sdu.edu.cn;hongxia.zhao@sdu.edu.cn;baichao@sdu.edu.cn

Abstract:

Energy is a fundamental element of human production and life, serving as the foundation for survival and social development. In future power systems, thermal power plants will primarily serve as auxiliary peak regulation sources, providing greater flexibility to accommodate renewable energy integration. This requires combined heating and power units (CHP) to enhance their operational flexibility and avoid frequent start-stop cycles during peak regulation. In this study, a CHP unit is coupled with a compressed carbon dioxide energy storage system (CCES) and a steam ejector (SE), and three improvement schemes are proposed. The technical potential of the CHP-SE-CCES coupling system (CSC) is investigated through a thermodynamic model, and its operational feasibility is analyzed. The advantages of the different schemes relative to the basic system are evaluated, and the influence of key parameters on the performance of the CCES and the CSC is discussed. The results indicate that the addition of an SE significantly improves the operational flexibility of the coupled system. Underrated thermal load conditions, schemes 2 and 3 can reduce the electric load by 68.56 MW and 50.56 MW, respectively, thus expanding the feasible operating range and enhancing thermoelectric decoupling capability. Increasing the hot water tank temperature improves the system power efficiency from 48.84% to 66.84%, the energy storage density from 1.07 kWh/m3 to 1.47 kWh/m3, and the power change ratio from 55.85% to 57.82%. Considering overall energy consumption, scheme 2 emerges as the optimal approach. The proposed method promotes flexible transformation of CHP units and provides a technical reference for integrating thermoelectric units with CCES technology.

Key words: combined heating and power unit, thermoelectric decoupling, compressed carbon dioxide energy storage, steam ejector, thermodynamic analysis

CLC Number: