储能科学与技术 ›› 2023, Vol. 12 ›› Issue (1): 79-85.doi: 10.19799/j.cnki.2095-4239.2022.0451

• 储能材料与器件 • 上一篇    下一篇

N掺杂多孔碳海绵定形芒硝基复合相变材料的制备及其热性能

王亮1(), 柳馨1, 汪长安1,2, 铁生年1()   

  1. 1.青海大学新能源光伏产业研究中心,青海 西宁 810016
    2.清华大学材料学院,北京 100084
  • 收稿日期:2022-08-16 修回日期:2022-09-05 出版日期:2023-01-05 发布日期:2023-02-08
  • 通讯作者: 铁生年 E-mail:18369885733@163.com;tieshengnian@163.com
  • 作者简介:王亮(1998—),男,硕士研究生,研究方向为相变储能材料,E-mail:18369885733@163.com
  • 基金资助:
    青海省自然基金项目(2021-ZJ-906)

Preparation and thermal performance of nitrogen-doped porous carbon sponge-type mirabilite-based composite phase-change material

Liang WANG1(), Xin LIU1, Changan WANG1,2, Shengnian TIE1()   

  1. 1.New Energy Photovoltaic Industry Research Institute, Qinghai University, Xining 810016, Qinghai, China
    2.School of Materials Science and Engineering, Qinghua University, Beijing 100084, China
  • Received:2022-08-16 Revised:2022-09-05 Online:2023-01-05 Published:2023-02-08
  • Contact: Shengnian TIE E-mail:18369885733@163.com;tieshengnian@163.com

摘要:

芒硝相变储能材料作为一种潜热值高、来源广泛的无机水合盐,因存在相分层、过冷度等问题,限制了其在储能领域的广泛应用。本工作以N掺杂多孔碳为载体,将芒硝相变储能材料与N掺杂多孔碳复合,解决芒硝相变储能材料在实际应用中存在的问题。基于水热反应在聚氨酯泡沫上负载N原子,随后通过高温碳化得到N掺杂的多孔碳海绵(NPCS-M),并将其作为Na2SO4·10H2O/Na2HPO4·12H2O共晶盐的载体,最终制备出N掺杂多孔碳海绵封装的芒硝基复合相变材料(NPCM)。结果表明:N掺杂多孔碳海绵为蜂窝状结构,N含量为4.3%,比表面积为42.52 m2/g,该材料对共晶盐的吸附量达到了自重的120倍。同时研究了该材料在5~60 ℃温度范围内循环1000次、3000次和5000次后的固液相变性能,经5000次循环后,该复合相变材料的潜热仍在130 J/g以上,且有降低共晶盐多次循环后过冷度的作用。该N掺杂多孔碳海绵复合相变材料在储能领域具有广阔的应用前景。

关键词: N掺杂, 多孔碳海绵, 定形, 共晶盐, 热性能

Abstract:

Given its issues with phase stratification and supercooling degree, mirabilite phase-change energy storage material, a type of inorganic hydrated salt with a high latent heat value and abundant source, has been restricted in its wide application in the field of energy storage. In this study, nitrogen-doped porous carbon is used as the carrier, and the mirabilite phase-change energy storage material is compounded with nitrogen-doped porous carbon to solve the problems in the practical application of mirabilite phase-change energy storage material. Through a hydrothermal reaction, nitrogen atoms were loaded on the polyurethane foam, and then the nitrogen-doped porous carbon sponge (NPCS-M) was obtained by high-temperature carbonization. The NPCS-M was used as the carrier of Na2SO4·10H2O/Na2HPO4·12H2O eutectic salt, and finally, the mirabilite-based composite phase-change material (NPCS-M) encapsulated by nitrogen-doped porous carbon sponge was prepared. The results showed that the nitrogen-doped porous carbon sponge was a honeycomb structure, with an N content of 4.3% and a specific surface area of 42.52 m2/g. The adsorption capacity of the material for the eutectic salt reached 120 times its weight. Simultaneously, the composite phase-change material's solid-liquid phase transformation properties after 1000, 3000, and 5000 cycles at 5—60 ℃ were studied. After 5000 cycles, the latent heat of the composite phase-change material was still above 130 J/g, and it can reduce the supercooling degree of eutectic salt after multiple cycles. The nitrogen-doped porous carbon sponge, a composite phase-change material, has a wide range of applications in the field of energy storage.

Key words: N doping, porous carbon sponge, stereotypy, eutectic salt, thermal performance

中图分类号: